In this paper, an elastoplastic-anisotropic damage constitutive model is proposed for the identification of damage parameters of Al2024-T3 by micro-hardness measurements. For this purpose, micro-hardness experiments are conducted on the surface of the specimens after the standard tensile tests. A procedure for the identification of the damage as a tensor variable is followed and then, the parameters of the model are calibrated. Also, the constitutive equations are implemented in a finite element explicit code to simulate the double-edge-notched specimen under shear loads and the tensile test. The results of the simulations are in a good agreement with those obtained in the experiments.
AlvesMYuJJonesN (2000) On the elastic modulus degradation in continuum damage mechanics. Computers & Structures, 76(6): 703–712.
2.
ArnoldGHubertOBillardonR (2002) Identification of continuum damage model from microhardness measurements. Prediction of Defects in Material. Processing, 5: 10–21.
3.
BielskiJSkrzypekJJKuna-CiskalH (2006) Implementation of a model of coupled elastic-plastic unilateral damage material to finite element code. International Journal of Damage Mechanics, 15(1): 5–39.
4.
BonoraNGentileDPirondiA (2005) Ductile damage evolution under triaxial state of stress: theory and experiments. International Journal of Plasticity, 21(5): 981–1007.
5.
ChowCLWangJ (1987a) An anisotropic theory of continuum damage mechanics for ductile fracture. Engineering Fracture Mechanics, 27(5): 547–558.
6.
ChowCLWangJ (1987b) An anisotropic theory of elasticity for continuum damage mechanics. International Journal of Fracture, 33(1): 3–16.
7.
ChowCLWangJ (1988a) Ductile fracture characterization with an anisotropic continuum damage theory. Engineering Fracture Mechanics, 30(5): 547–563.
8.
ChowCLWangJ (1988b) A finite element analysis of continuum damage mechanics for ductile fracture. International Journal of Fracture, 38: 83–102.
9.
CotterellMSchambergerovaJZiegelheimJ (2002) Dependence of micro-hardness on deformation of deep-drawing steel sheets. Journal of Material Processing Technology, 124(3): 293–296.
10.
Ganjiani M, Naghdabadi R and Asghari M. (2012). An elastoplastic damage-induced anisotropy constitutive model at finite strains. International Journal of Damage Mechanics: DOI: 10.1177/1056789512455937.
11.
GuelorgetBFrançoisMLuJ (2007) Microindentation as a local damage measurement technique. Materials Letters, 61: 34–36.
12.
LangeK (1985) Handbook of Metal Forming, New York: McGraw-Hill Book Company.
13.
LemaitreJ (1985) A continuous damage mechanics model for ductile fracture. Journal of Engineering Materials and Technology, 107: 83–89.
14.
LemaitreJChabocheJL (1990) Mechanics of Solid Materials, Cambridge, UK: Cambridge University Press.
LuoACJMouYHanRPS (1994) A large anisotropic damage theory based on an incremental complementary energy equivalence model. International Journal of Fracture, 70(1): 19–34.
17.
MkaddemABahloulRDalSantoP (2006a) Experimental characterisation in sheet forming processes by using Vickers micro-hardness technique. Journal of Materials Processing Technology, 180(1–3): 1–8.
18.
MkaddemAGassaraFHambliR (2006b) A new procedure using the microhardness technique for sheet material damage characterisation. Journal of Materials Processing Technology, 178(1–3): 111–118.
19.
MkaddemAPotironABoudeS (2004) Finite element modelling of unbending tests with damage approach and experimental verification. Journal of Materials Processing Technology, 152: 246–255.
20.
PavlouD (2002) A phenomenological fatigue damage accumulation rule based on hardness increasing, for the 2024-T42 aluminum. Engineering Structures, 24(11): 1363–1368.
21.
PetitFVandeneedeVCambierF (2007) Relevance of instrumented micro-indentation for the assessment of hardness and Young's modulus of brittle materials. Materials Science and Engineering, A 456(1–2): 252–260.
22.
SidjaninLRajnovicDRanogajecJ (2007) Measurement of Vickers hardness on ceramic floor tiles. Journal of European Ceramic Society, 27(2–3): 1767–1773.
23.
SidoroffF (1981) Description of anisotropic damage application to elasticity. IUTAM Colloquium on Physical Nonlinearities in Structural Analysis, 237–244Berlin, Heidelberg: Springer-Verlag.
24.
TasanCHoefnagelsJGeersM (2009) A critical assessment of indentation-based ductile damage quantification. Acta Materialia, 57: 4957–4966.
25.
TasanCHoefnagelsJGeersM (2010) Indentation-based damage quantification revisited. Scripta Materialia, 63(3): 316–319.
26.
YeDWangZ (2001) An approach to investigate pre-nucleation fatigue damage of cyclically loaded metals using Vickers microhardness tests. International Journal of Fatigue, 23(1): 85–91.
27.
ZhuYYCescottoS (1995) A fully coupled elasto-visco-plastic damage theory for anisotropic materials. International Journal of Solids and Structures, 32(11): 1607–1641.
