Refined Delamination Factor Failure Characterization of Composite Wind Turbine Blade

Abstract

Wind turbines are used to convert the kinetic energy of wind into useful power. The wind turbine blades are fabricated using glass fiber-reinforced composite materials. Wind turbine blades are complex section. In order to improve the strength of the blades under varying loading conditions, spars are embedded in it. The spars are fastened with the composite shells of the blades using bolted connections. In order to affect this fastening, holes of appropriate size were drilled in the composite laminates. Delamination is the major failure in composite blades which is induced during drilling. Delamination is quantitatively measured using digital means. A comparison between the conventional (F_D) and adjusted (F_DA) delamination factors is presented. In order to effectively quantify the delamination, refined delamination factor (F_DR) is proposed. It is found that the proposed F_DR predicts the failure in a better manner when compared with predictive capabilities of F_D as well as F_DA.

Keywords

interlaminar shear stress MATLAB refined delamination factor severity wind turbine blades

Get full access to this article

View all access options for this article.

References

Aoyama

Nobe

Hirogaki

(2001). Drilled Hole Damage of Small Diameter in Printed Wiring Board. Journal on Master Process Technology, 118: 436–441.

Arul

Vijayaraghavan

Malhotrab

S.K.

Krishnamurthy

(2006). The Effect of Vibratory Drilling on Hole Quality in Polymeric Composites. International Journal on Machine Tools Manufacturing, 46: 252–259.

Bechly

M.E.

Clausen

P.D.

(1997). Structural Design of a Composite Wind Turbine Blade using Finite Element Analysis. Computers and Structures, 63: 639–646.

Buckingham

(1915). Model Experiments and the Forms of Empirical Equations. ASME Transactions, 37: 263–277.

Campos Rubio

Abrao

A.M.

Faria

P.E.

Esteves Correia

Paulo Davim

(2008). Effects of High Speed in the Drilling of Glass Fibre Reinforced Plastic: Evaluation of the Delamination Factor. International Journal of Machine Tools and Manufacture, 48: 715–720.

Davim

J.P.

Reis

(2003). Study of Delamination in Drilling Carbon Fiber Reinforced Plastics (CFRP) Using Design Experiments. Composite structures, 59: 481–487.

Dym

C.L.

(2004). Principles of Mathematical Modeling. New York, NY, Elsevier Academic Press.

Inoue

Aoyama

Hirogaki

Ogawa

Matushita

Kitahara

(1997). Influence of Tool Wear on Internal Damage in Small Diameter Drilling in GFRP. Composite Structures, 39: 55–62.

Kao

W.H.

(2005). Tribological Properties and High Speed Drilling Application of MoS₂-Cr. Wear, 258: 812–825.

10.

Paulo Davim

Campos Rubio

Abrao

A.M.

(2007). A Novel Approach Based on Digital Image Analysis to Evaluate the Delamination Factor After Drilling Composite Laminates. Composite Science and Technology, 67: 1939–1945.

11.

Rise National Laboratory and Det Norske Veritas (2002). Guidelines for Design of Wind Turbines, 2nd edn. Denmark, Rise National Laboratory and Det Norske Veritas.

12.

Selwin Rajadurai

Thanigaiyarasu

(2007). Failure Envelope Generation using Modified Failure Criteria for Wind Turbine Blade and Comparison With Stress Based, Strain Based and Interactive Criteria. IETECH Journal of Mechanical Design, 01: 001–012.

13.

SSThe MathWorks Inc (1994). Image Processing Tool Box User’s Guide. Natick, MA, The Math Works, Inc.