In this article, the impact-induced dynamic failure of a soda-lime glass block is studied using an integrated experimental/analytical approach. The Split Hopkinson Pressure Bartechnique is used to conduct dynamic failure test of soda-lime glass first. The damage growth patterns and stress histories are reported for various glass specimen designs. Making use of a continuum damage mechanics-based constitutive model, the initial failure and subsequent stiffness reduction of glass are simulated and investigated. Explicit finite element analyzes are used to simulate the glass specimen impact event. A maximum shear stress-based damage evolution law is used in describing the glass damage process under combined compression/shear loading. The impact test results are used to quantify the critical shear stress for the soda-lime glass under examination.
AndersonC.E. JrChocronI.S.WalkerJ.D.JeffreyJ.Swab (2005). Analysis of Time-Resolved Penetration of Long Rods into Glass Targets, Advances in Ceramic Armor, Proceedings of the 29th International Conference on Advanced Ceramics and Composites, 23–28 JanuaryCocoa Beach, FA, pp. 35–42.
2.
AroraA.MarshallD.B.LawnB.R.SwainM.V. (1979). Indentation Deformation Fracture of Normal and Anomalous Glasses, Journal of Non-Crystalline Solids, 31: 415–428.
3.
BertoldiM.SglavoV.M. (2004). Soda–borosilicate Glass: Normal or Anomalous Behavior under Vickers Indentation?, Journal of Non-Crystalline Solids, 344: 51–59.
4.
BrajerX.ForquinP.GyR.HildF. (2003). The Role of Surface and Volume Defects in the Fracture of Glass Under Quasi-static and Dynamic Loadings, Journal of Non-Crystalline Solids, 316: 42–53.
5.
BurghardZ.ZimmermannA.ReodelJ.AldingerF.LawnB.R. (2004). Crack Opening Profiles of Indentation Cracks in Normal and Anomalous Glasses, Acta Materialia, 52: 293–297.
6.
ChabocheJ.L. (1988). Continuum Damage Mechanics, Part I & II, Journal of Applied Mechanics, 55: 59–72.
7.
ChaudhriM.M.WalleyS.M. (1978). Damage of Glass Surface by the Impact of Small Glass And Steel Spheres, Philosophical Magazine A, 37: 153–165.
8.
ChaudhriM.M.KurkjianC.R. (1986). Impact of Small Steel Spheres on the Surfaces of ‘Normal’ and ‘Anomalous' Glasses, Journal of the Amercian Ceramic Society, 69: 404–410.
9.
DannemannK.A.ChocronI.S.NichollsA.AndersonJr`C.E.WalkerJ.D.WereszczakA.FranksL.P.Lara-CurzioE. (2006). Response and Characterization of Confined Borosilicate Glass: Intact and Pre-Damaged, Advances in Ceramic Armor II, pp. 119–130.
10.
EspinosaH.D.XuY.BrarN.S. (1997). Micromechanics of Failure Waves in Glass: I, Experiments, Journal of the American Ceramic Society, 80: 2061–2073.
11.
GrammenoudisP.ReckwerthD.TsakmakisCh. (2009a). Continuum Damage Models Based on Energy Equivalence: Part I – Isotropic Material Response, International Journal of Damage Mechanics, 18: 31–64.
12.
GrammenoudisP.ReckwerthD.TsakmakisCh. (2009b). Continuum Damage Models Based on Energy Equivalence: Part II – Anisotropic Material Response, International Journal of Damage Mechanics, 18: 65–91.
13.
Hibbitt, Karlsson and Sorensen, Inc. (2002). ABAQUS/Explicit User's Manual, Pawtucket, RI, Hibbitt, Karlsson and Sorensen, Inc.
14.
HolmquistT.J.JohnsonG.R. (2002). Response of Silicon Carbide to High Velocity Impact, Journal of Applied Physics, 91: 5858–5866.
15.
JeongJ.AdibH.PluvinageG. (2005). Proposal of New Damage Model for Thermal Shock Based on Dynamic Fracture on the Brittle Materials, Journal of Non-Crystalline Solids, 351: 2065–2075.
16.
JohnsonG.R.HolmquistT.J.BeisselS.R. (2003). Response of Aluminum Nitride to Large Strains, High Strain Rates and High Pressures, Journal of Applied Physics, 94: 1639–1646.
17.
KarrD.G.ChoiK. (1989). A Three Dimensional Continuum Damage Model for Polycrystalline Ice, Mechanics of Materials, 8: 55–66.
18.
KnightC.G.SwainM.V.ChaudhriM.M. (1977). Impact of Small Steel Spheres on Glass Surfaces, Journal of Materials Science, 12: 1573–1586.
19.
KurkjianC.R.KrauseJ.T.McSkimminH.J.AndreatchP.BatemanT.B.DouglasR.W.EllisB. (1972). Pressure Dependence of Elastic Constants and Gruneisen Parameters in Fused SO2, GeO2, BeF2, and B2O3, Amorphous Materials, New YorkWiley, pp. 463–473.
20.
NguyenB.N.KoeppelB.J.AhziS.KhaleelM.A.SinghP. (2006). Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling, Journal of the American Ceramic Society, 89: 1358–1368.
21.
NieX.ChenW.W.SunX.TempletonD.W. (2007). Dynamic Failure of Borosilicate Glass under Compression/Shear Loading – Experiments, Journal of the American Ceramic Society, 90: 2556–2562.
22.
ScattergoodR.O. (1987). On Lateral Cracks in Glass, Journal of Material Science, 22: 3463–3469.
23.
SimoJ.C.JuJ.W. (1987a). Strain- and Stress-based Continuum Damage Models – I. Formulation, International Journal of Solids Structures, 23: 821–840.
24.
SimoJ.C.JuJ.W. (1987b). Strain- and Stress-based Continuum Damage Models – II. Computational Aspects, International Journal of Solids Structures, 23: 841–869.
25.
StrassburgerE.PatelP.McCauleyJ.W.KovalchickC.RameshK.T. (2007). High-Speed Transmission Shadowgraphic and Dynamic Photoelasticity Study of Stress Wave and Impact Damage Propagation in Transparent Materials and Laminates Using the Edge-On Impact (EOI) Method. Proceedings of the 25th Army Science and Technology Conference, Orlando, FA, 23 October 2006.
26.
SuhC.M.LeeM.H.HwangB.W.KimS.H. (2003). Damage Behavior in Ceramic Plasma-Coated and Uncoated Glass with Steel-Ball Impact, Journal of the American Ceramic Society, 86: 1220–1222.
27.
SunX.KhaleelM.A. (2005a). Modeling of Glass Fracture Damage using Continuum Damage Mechanics – Static Spherical Indentation, International Journal of Damage Mechanics, 13: 263–285.
28.
SunX.KhaleelM.A. (2005b). Effects of Different Design Parameters on Stone Impact Resistance of Automotive Windshields, Journal of Automobile Engineering, Proceedings of the Institution of Mechanical Engineering, 219(Part D): 1059–1067.
29.
SunX.KhaleelM.A.DaviesR.W. (2005). Modeling of Stone-Impact Resistance of Monolithic Glass Ply Using Continuum Damage Mechanics, International Journal of Damage Mechanics, 14: 165–178.
30.
SunX.LiuW.N.ChenW.TempletonD. (2009). Modeling and Characterization of Dynamic Failure of Borosilicate Glass Under Compression/Shear Loading, International Journal of Impact Engineering, 36: 226–234.
31.
SunX.LiuW.N.KhaleelM.A. (2007). Limit Analyses for Surface Crack Instantaneous Propagation Angles in Elastic Hertzian Field, In: ICPSS-257519, Proceedings of 31st International Conference on Advanced Ceramics and Composites, 21–26 January, doi: 10.1002/9780470339695.ch7, Daytona Beach, FA.
32.
VoyiadjisG.Z.KattanP.I. (2009). A Comparative Study of Damage Variables in Continuum Damage Mechanics, International Journal of Damage Mechanics, 18: 315–340.
33.
WiederhornS.M.LawnB.R. (1977). Strength Degradation of Glass Resulting from Impact with Spheres, Journal of American Ceramic Society, 60: 451–458.
34.
ZhaoS.DharaniL.R.ChaiL.BarbatS.D. (2006). Analysis of Damage in Laminated Automotive Glazing Subjected to Simulated Head Impact, Engineering Failure Analysis, 13: 582–597.
