Proper life-time prediction modeling of single crystalline components is of increasing importance due to their common use in turbine industry. Viscoplastic damage approaches are of great interest in that context. However, mechanical properties of single crystals are strongly anisotropic and nonlinear in service conditions, bringing certain complexity into constitutive and numerical modeling. The aim of this work is to develop a thermodynamically consistent constitutive model based on generalized continua in order to simulate fatigue crack initiation and growth in single crystals. For that purpose, a standard crystal plasticity model is taken as a basis and coupled with the continuous damage model developed by Marchal et al. (2006a) [Marchal, N., Forest, S., Remy, L. and Duvinage, S. (2006a). Simulation of Fatigue Crack Growth in Single Crystal Superalloys Using Local Approach to Fracture, In: Moinereau, D., Steglich, D. and Besson, J. (eds.), Local Approach to Fracture, 9th European Mechanics of Materials Conference, Euromech-Mechamat, Moret-Sur-Loing, France, Presses de l’Ecole des mines de Paris, pp. 353-358]. As a variant of micromorphic theory, microdamage approach is applied to the model in order to obtain a regularized continuum damage formulation which solves mesh dependency problem by introducing an intrinsic length scale. A detailed finite element implementation procedure and its validation for monotonic crack growth are-shown. Fatigue crack growth analyses have been performed on a single edge notched geometry and a comparison between numerical and experimental results is presented.
Aslan, O. and Forest, S. ( 2009). Crack Growth Modelling in Single Crystals Based on Higher Order Continua, Computational Materials Science, 45: 756-761.
2.
Aswath, P. ( 1994). The Effect of Orientation on Crystallographic Cracking in Notched Nickel-base Supperalloy Single Crystal Subjected to Far-field Cyclic Compression, Metallurgical and Materials Transactions, 25A: 287-297.
3.
Besson, J. ( 2009). Damage of Ductile Materials Deforming Under Multiple Plastic or Viscoplastic Mechanisms, International Journal of Plasticity, 25: 2204-2221.
4.
Besson, J., Leriche, R., Foerch, R. and Cailletaud, G. ( 1998). Object-oriented Programming Applied to the Finite Element Method. Part ii, Application to material behaviours. Revue Européenne des Eléments Finis, 7: 567-588.
5.
Bouvard, J.L., Chaboche, J.L., Feyel, F. and Gallerneau, F. ( 2009). A Cohesive Zone Model for Fatigue and Creep-fatigue Crack Growth in Single Crystal Superalloys, International Journal of Fatigue, 31: 868-879.
6.
Cailletaud, G. and Chaboche, J.L. ( 1995). Integration Methods for Complex Plastic Constitutive Equations, Computer Methods in Applied Mechanics and Engineering , 133: 125-155.
7.
Crompton, J.S. and Martin, J.W. ( 1984). Crack Tip Plasticity and Crack Growth in a Singlecrystal Superalloy at Elevated Temperatures, Materials Science and Engineering, 64: 37-43.
8.
Dillard, T., Forest, S. and Ienny, P. ( 2006). Micromorphic Continuum Modelling of the Deformation and Fracture Behaviour of Nickel Foams, European Journal of Mechanics A/Solids, 25: 526-549.
9.
Ekh, M., Lillbacka, R. and Runesson, K. ( 2004). A Model Framework for Anisotropic Damage Coupled to Crystal (Visco) Plasticity, International Journal of Plasticity, 20: 2143-2159.
10.
Elber, W. ( 1970). Fatigue Crack Closure Under Cyclic Tension, Engineering Fracture Mechanics, 2: 37-45.
11.
Engelen, R.A.B., Geers, M.G.D. and Baaijens, F.P.T. ( 2003). Nonlocal Implicit Gradient-enhanced Elasto-plasticity for the Modelling of Softening Behaviour, International Journal of Plasticity, 19: 403-433.
12.
Eringen, A.C. and Suhubi, E.S. ( 1964). Nonlinear Theory of Simple Microelastic Solids, International Journal of Engineering Science, 2: 189-203, 389-404.
13.
Forest, S. ( 2009). The Micromorphic Approach for Gradient Elasticity, Viscoplasticity and Damage, ASCE Journal of Engineering Mechanics, 135: 117-131.
14.
Gall, K., Sehitoglu, H. and Kadioglu, Y. ( 1996). FEM Study of Fatigue Crack Closure Under Double Slip , Acta Metallurgica, 44: 3955-3965.
15.
Germain, N., Besson, J. and Feyel, F. ( 2007). Simulation of Laminate Composites Degradation Using Mesoscopic Non-local Damage Model and Non-local Layered Shell Element, Modelling and Simulation in Materials Science and Engineering, 15: S425-S434.
16.
Gurson, A.L. ( 1977). Continuum Theory of Ductile Rupture by Void Nucleation and Growth. part i: Yield Criteria and Flow Rules for Porous Ductile Media , Journal of Engineering Materials and Technology, 99: 2-15.
17.
Kiyak, Y., Fedelich, B. and Pfennig, A. ( 2007). Simulation of Crack Growth Under Low Cycle Fatigue at High Temperature in a Single Crystal Superalloy, Engineering Fracture Mechanics, 75: 2418-2443.
18.
Lemaitre, J. and Chaboche, J.-L. ( 1994). Mechanics of Solid Materials, Cambridge, UK, University Press.
19.
Leverant, G. and Gell, M. ( 1975). The Influence of Temperature and Cyclic Frequency on the Fatigue Fracture of Cube Oriented Nickel-based Supperalloy, Metallurgical Transactions A, 6A: 367-371.
20.
Marchal, N. ( 2006). Propagation de Fissure en Fatigue-fluage á Haute Température de Superalliages Monocristallins à Base de Nickel, PhD Thesis, Ecole des Mines de Paris.
21.
Mahnken, R. ( 2002). Theoretical, Numerical and Identification Aspects of a New Model Class for Ductile Damage, International Journal of Plasticity, 18: 801-831.
22.
Marchal, N., Flouriot, S., Forest, S. and Remy, L. ( 2006b). Crack-tip Stress-Strain Fields in Single Crystal Nickel-base Superalloys at High Temperature Under Cyclic Loading, Computational Materials Science, 37: 42-50.
23.
Marchal, N., Forest, S., Rémy, L. and Duvinage, S. ( 2006a). Simulation of Fatigue Crack Growth in Single Crystal Superalloys Using Local Approach to Fracture. In: Moinereau, D., Steglich, D. and Besson, J. (eds), Local Approach to Fracture, 9th European Mechanics of Materials Conference, Euromech-Mecamat, Moret-sur-Loing , France, Presses de l’Ecole des Mines de Paris, pp. 353-358.
24.
Murakami, S., Hayakawa, K. and Liu, Y. ( 1998). Damage Evolution and Damage Surface of Elastic-plastic-damage Materials Under Multiaxial Loading, International Journal of Damage Mechanics, 7: 103-128.
25.
Musienko, A. and Cailletaud, G. ( 2009). Simulation of Inter- and Transgranular Crack Propagation in Polycrystalline Aggregates due to Stress Corrosion Cracking, Acta Materialia, 57: 3840-3855.
26.
Nouailhas, D. and Cailletaud, G. ( 1995). Tension-torsion Behavior of Singlecrystal Supperalloys: Experiment and Finite Element Analysis, International Journal of Plasticity, 11: 451-470.
27.
Parisot, R., Forest, S., Pineau, A., Nguyen, F., Démonet, X. and Mataigne, J.-M. ( 2004). Deformation and Damage Mechanisms of Zinc Coatings on Hot-dip Galvanized Steel Sheets: Part ii. Damage Modes, Metallurgical and Materials Transactions A, 35A: 813-823.
28.
Peerlings, R.H.J., Geers, M.G.D., de Borst, R. and Brekelmans, W.A.M. ( 2001). A Critical Comparison of Nonlocal and Gradient-enhanced Softening Continua, International Journal of Solids Structures , 38: 7723-7746.
29.
Peerlings, R.H.J., Massart, T.J. and Geers, M.G.D. ( 2004). A Thermodynamically Motivated Implicit Gradient Damage Framework and its Application to Brick Masonry Cracking, Computer Methods in Applied Mechanics and Engineering, 193: 3403-3417.
30.
Qi, W. and Bertram, A. ( 1999). Anisotropic Continuum Damage Modeling for Single Crystals at High Temperatures, International Journal of Plasticity , 15: 1197-1215.
31.
Rice, J.R. ( 1987). Tensile Crack Tip Fields in Elastic-ideally Plastic Crystals , Mechanics of Materials, 6: 317-335.
32.
Simo, J.C. and Ju, J.W. ( 1989). Finite Deformation Damage-elastoplasticity: A Non-conventional Framework, International Journal of Computational Mechanics , 5: 375-400.
33.
Solanki K., Daniewicz S.R. and Newman Jr, J.C. ( 2004). Finite Element Analysis of Plasticity-induced Fatigue Crack Closure, Engineering Fracture Mechanics, 71: 149-171.
34.
Tvergaard, V. and Needleman, A. ( 1984). Analysis of Cup-cone Fracture in a Round Tensile Bar , Acta Metallurgica, 32: 157-169.
35.
Voyiadjis, G.Z. and Deliktas, B. ( 2000). A Coupled Anisotropic Damage Model for the Inelastic Response of Composite Materials, Computer Methods in Applied Mechanics and Engineering, 183: 159-199.
