In this article, the toughening effect of polymer fibers in cementitious materials is analyzed through an energy method. When a crack front encounters a fiber array, additional fracture work is required to overcome the barrier effect. The influences of fibers, matrix, and crack length on the critical energy release rate are collectively described by a single system parameter.
Anderson, H. and Bergkvist, H. (1970). Analysis of a Nonlinear Crack Model, J. Mech. Phys. Solids, 18: 1-28.
2.
Banthia, N. and Nandakumar, N. (2003). Crack Growth Resistance of Hybrid Fiber Reinforced Cement Composites, Cem. Concr. Comp., 25: 3-9.
3.
Barbero, E.J., Greco, F. and Lonetti, P. (2005). Continuum Damage-healing Mechanics with Application to Self-healing Composites, Inter. J. Damage Mech., 14: 51-81.
4.
Bayasi, Z. and Al Dhaheri, M. (2002). Effect of Exposure to Elevated Temperature on Polypropylene Fiber-Reinforced Concrete, ACI Mater. J., 99: 22-26.
5.
Bayasi, Z. and McIntyre, M. (2002). Application of Fibrillated Polypropylene Fibers for Restraint of Plastic Shrinkage Cracking in Silica Fume Concrete, ACI Mater. J., 99: 337-344.
6.
Chan, L.C., Cheng, C.H., Jie, M. and Chow, C.L. (2005). A Damage-coupled Criterion of Localized Necking Based on Acoustic Tensor, Inter. J. Damage. Mech., 14: 83-96.
7.
Gross, B. and Srawley, J.E. (1972). Stress Intensity Factors for Bend and Compact Specimens, Eng. Fract. Mech., 4: 587-589.
8.
Haj Ali, R. and El Hajjar, R. (2004). Mode-I fracture Toughness Testing of Thick Section FRP Composites using the ESE(T) Specimen, Eng. Fract. Mech. , 35: 631-643.
9.
Hellan, K. (1994). Introduction to Fracture Mechanics, McGraw-Hill, New York.
10.
Ju, J.W., Ko, Y.F. and Ruan, H.N. (2006). Effective Elastoplastic Damage Mechanics for Fiber Reinforced Composites with Evolutionary Complete Fiber Debonding, Inter. J. Damage Mech., 15: 237-265.
11.
Lee, S., Jeng, S.M. and Yang, J.M. (1995). Modeling and Simulation of the Effect of Fiber Breakage on Creep Behavior of Fiber-reinforced Metal Matrix Composites, Mech . Mater., 21: 303-312.
12.
Kamada, T. and Li, V.C. (2000). The Effects of Surface Preparation on the Fracture Behavior of ECC/Concrete Repair System, Cem. Concr. Compos. , 22: 423-431.
13.
Kodur, V.K.R., Cheng, F.P., Wang, T.C. and Sultan, M.A. (2003). Effect of Strength and Fiber Reinforcement on the Fire Resistance of High Strength Concrete Columns, J. Struct. Eng. ASCE, 129: 253-259.
14.
Kullaa, J. (1994). Constitutive Modeling of Fiber-reinforced Concrete under Uniaxial Tensile Loading, Compos., 25: 935-944.
15.
Mamlouk, M.S. and Zaniewski, J.P. (1999). Materials for Civil and Construction Engineers , Addison-Wesley, New York.
16.
Mindess, S., Young, J.F. and Darwin, D. (2002). Concrete, Pearson Education , Upper Saddle River, NJ.
17.
Mower, T.M. and Argon, A.S. (1995). Experimental Investigations of Crack Trapping in Brittle Heterogeneous Solids, Mech. Mater., 19: 343-364.
18.
Ouaar, A., Doghri, I., Delannay, L. and Thimus, J.F. (2007). Micromechanics of the Deformation and Damage of Steel Fiber-reinforced Concrete, Inter. J. Damage Mech., 16: 227-260.
19.
Qiao, Y. (2003). Fracture Toughness of Composite Materials Reinforced by Debondable Particulates, Scripta Mater., 49: 491-496.
20.
Ulm, F.J. (2003). Chemomechanics of Concrete at Finer Scales, Mater . Struct., 36: 426-438.
21.
Zollo, R.F. (1997). Fiber-reinforced Concrete: An Overview After 30 years of Development, Cem. Concr. Compos., 19: 107-122.
22.
Zou, P.X.W. (2003). Flexural behavior and Deformability of Fiber Reinforced Polymer Prestressed Concrete Beams, J. Compos. Constr., 7: 275-284.
