The paper presents a generalized mixed isotropic-kinematic hardening plastic model coupled with anisotropic damage for sheet metal forming. A nonlinear anisotropic kinematic hardening is developed. For the predication of limit strains at localized necking in stamping under complex strain history, the model and its associated damage criterion for localized necking are established and implemented into LS-DYNA3D by compiling it as a user subroutine. The finite element simulation of LS-DYNA3D based on the present model is carried out. The location of localized necking for sheet metal forming has been successfully identified.
Get full access to this article
View all access options for this article.
References
1.
Armstrong, P.J. and Frederick, C.O. (1966). A Mathematical Representation of the Multiaxial Bauschinger Effect. CEGB Report RD/B/N73 1, Central Electricity Generating Board .
2.
Barata da Rocha, A., Barlat, F. and Jalinier, J.M. (1984). Prediction of the Forming Limit Diagram of Anisotropic Sheets in Linear and Nonlinear Loading , Materials Science and Engineering, 68: 151-164 .
3.
Chaboche, J.L. and Jung, O. (1997). Application of a Kinematic Hardening Viscoplasticity Model with Thresholds to the Residual Stress Relaxation , International Journal of Plasticity, 13: 785-807 .
4.
Chen, X.F. and Chow, C.L. (1995). On Damage Strain Energy Release Rate Y , International Journal of Damage Mechanics, 4: 251-263 .
5.
Chow, C.L. and Chen, X.F. (1992). An Anisotropic Model of Damage Mechanics Based on Endochronic Theory of Plasticity , International Journal of Fracture, 55: 115-130 .
6.
Chow, C.L., Yu, L.G. and Demeri, M.Y. (1996). Prediction of Forming Limit Diagram with Damage Analysis, SAE Technical Paper Series 960598, pp. 73-80.
7.
Chow, C.L., Yu, L.G. and Demeri, M.Y. (1997). A Unified Damage Approach for Predicting Forming Limit Diagrams , ASME: Journal of Engineering Materials and Technology, 119: 346-353 .
8.
Chow, C.L., Yang, X.J. and Chu, E. (2001a). FE Simulation of Sheet Metal Forming Using LS-DYNA3D Based User Subroutine . In: New Sheet Steel Products and Sheet Metal Stamping, SP-1614, SAE 2001 World Congress, Detroit, Michigan, SAE Technical Paper No. 2001-01-1129.
9.
Chow, C.L., Yang, X.J. and Chu, E. (2001b). Viscoplastic Constitutive Modeling of Anisotropic Damage Under Nonproportional Loading , ASME: Journal of Engineering Materials and Technology, 123: 403-408 .
10.
Chow, C.L., Yang, X.J. and Chu, E. (2002). Predication of Forming Limit Diagram Based on Damage Coupled Kinematic-isotropic Hardening Model under Nonproportional Loading , ASME Journal of Engineering Materials and Technology, 124: 259-265 .
11.
Chu, C.C. (1984). A Three-dimensional Model of Anisotropic Hardening in Metals and its Application to the Analysis of Sheet Metal Formability , Journal of Mechanics and Physics of Solids, 32(3): 197-212 .
12.
Cordebois, J.P. and Sidoroff, F. (1982). Endommagement anisotrope en elasticite et plasticite, JMTA , Numero Special, pp. 311-321.
13.
Geng, L. and Wagoner, R.H. (2000). Springback Analysis with a Modified Hardening Model, In: Sheet Metal Forming: Sing Tang 65th Anniversary Volume, SAE SP-1536, pp. 21-31.
14.
Graf, A.F. and Hosford, W. (1994). The Influence of Strain-path Changes on Forming Limit Diagram of AL6111-T4 , Int. J. Mech. Sci., 36: 897-910 .
15.
Hill, R. (1948). A Theory of Yield and Plastic Flow of Anisotropic Metals , In: Proceedings of the Royal Society, Vol. A193, pp. 281-297 , London.
16.
Lee, K.D. and Krempl, E. (1991). An Orthotropic Theory of Viscoplasticity Based on Overstress for Thermomechanical Deformation , Int. J. Solids Struct., 27: 1445-1459 .
17.
LS-DYNA User’s Manual (Nonlinear Dynamic Analysis of Structures), May, 1999, Version 950, Livermore Software Technology Corporation .
18.
Moosbrugger, J.C. (2000). Anisotropic Nonlinear Hardening Rule Parameters from Reversed Proportional Axial-torsional Cycling , ASME: Journal of Engineering Materials and Technology, 122: 18-28 .
19.
Nouailhas, D. and Freed, A.D. (1992). A Viscoplasticity Theory for Anisotropic Materials , ASME: J. Engng. Materials Tech., 114: 97-104 .
20.
Prager, W. (1955). The Theory of Plasticity: A Survey of Recent Achievements, James Clayton Lecture , In: Proceedings of the Institute of Mechanical Engineers, 169: 41-57 .
21.
Wu, H.C., Hong, H.K. and Shiao, Y.P. (1999). Anisotropic Plasticity with Application to Sheet Metals , International Journal of Mechanical Sciences, 41: 703-724 .
