Abstract
Presurgical nasoalveolar molding (PNAM) is a key step in the early management of cleft babies. It involves making an impression of the alveolar segments and the lip elements, after which an appliance is fabricated and activated to achieve optimal alveolar and nasal positions for a superior surgical result. These appliances are fabricated and activated in babies as young as 10 days, and the molding is ideally carried on till the baby is ready for the primary lip repair. This article outlines in detail a digital method of fabricating the PNAM appliance using a combination of intraoral scans, computer-assisted digital software, and computer-assisted machining, facilitated by milling machines. This process obviates impression making and the subsequent laboratory procedures.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
