This review examines fundamental concepts in bonding to dentin. Emphasis is placed on the structure and permeability characteristics of dentin and how they may influence its interaction with adhesive resin. Several new techniques to examine the interfaces between resin and dentin are reviewed along with some of their limitations. The advantages and disadvantages of acid etchants/conditioners vs. self-etching conditioners/primers are discussed. The problems of matching the surface tension of resin-bonding systems to the surface energy of the substrate are reviewed in terms of wetting the various components of dentin. The problems associated with matching the permeability of intertubular dentin to the diffusibility of bonding reagents are explored. Speculation is advanced on how to ensure polymerization and wetting of dentinal collagen. Theoretical problems associated with dentin bonding and with bond testing are reviewed to encourage future research in this rapidly developing area.
References
1.
Abe Y. (1986). Relation between interpenetration and bond strength to dentin with 4-META, phenyl-P, HNPM, and 4-MET/MMA-TTB resins. Dent Mater J5:839-851.
2.
Akimoto T., Kadoma Y., Imai Y. ( 1990). Studies on adhesion mechanisms of MMA-TBBO resin to dentin: a model experiment using decalcified dentin. Dent Mater J9:320-325.
3.
Asmussen E., Uno S. (1993). Solubility parameters, fractional polarities, and bond strengths of some intermediary resins used in dentin bonding. I Dent Res72:558-565.
4.
Asmussen E., Hansen EK, Peutzfeldt A. (1991). Influence of the solubility parameters on the effectiveness of the Gluma bonding system. I Dent Res70:1290-1293.
5.
Attal JP, Asmussen G., Degrange M. (1994). Effects of surface treatment on the free energy of dentin. Dent Mater10:259-264.
6.
Baier RE (1992). Principles of adhesion. Oper Dent5(Suppl): 1-9.
7.
Baier RE, Shafrin EG, Zisman WA (1968). Adhesion: mechanisms that assist or impede it. Science162:1360-1368.
8.
Bean TA, Zhuang WC, Tong PY, Eick JD, Yourtee DM (1994). Effect of esterase on methacrylates and methacrylate polymers in an enzyme simulator for biodurability and biocompatibility testing. ) J Biomed Mater Res28:59-63.
9.
Benediktsson S. (1991). Adhesiveness of dentin: a contact angle study (MS thesis). Birmingham, AL: Department of Oral Biology, University of Alabama at Birmingham.
10.
Bowen RL (1965). Adhesive bonding of various materials to hard tooth tissues. II. Bonding to dentin promoted by a surface-active comonomer. J Dent Res44:895-902.
11.
Bowen RL (1980). Adhesive bonding of various materials to hard tooth tissues. XXII. The effects of a cleanser mordant and polySAC on adhesion between a composite and resin dentin. J Dent Res59:809-814.
12.
Bowen RL, Cobb EN, Misra DN (1984a). Adhesive bonding by surface initiation of polymerization. Ind Eng Chem Prod Res23:78-81.
13.
Bowen RL, Eick JD, Henderson DA, Anderson DW (1984b). Smear layer: removal and bonding considerations. Oper Dent3(Suppl):30-34.
14.
Bowles Q., Miller R., Chappelow C., Eick D. ( 1996). Dentin bonding and isocyanatoacrylate copolymers-design, formulation, and evaluation (abstract). J Dent Res75(Spec Iss):347.
15.
Boyde A., Switsur VR, Steward ADG (1963). An assessment of two new physical methods applied to the study of dental tissues. In: Advances in fluorine research and dental caries prevention. Vol. 1. Oxford, UK: Pergamon Press Ltd., pp. 185-193.
16.
Brannstrom M. (1986). The cause of post restorative sensitivity and its prevention. J Ended12:475-481.
17.
Brannstrom M. (1992). Etiology of dentin hypersensitivity. Proc Finn Dent Soc88(Suppl 1):7-13.
18.
Brannstrom M., Nordenvall KJ (1977). The effect of acid etching on enamel, dentin and the inner surface of the resin restoration. J Dent Res56:917-922.
19.
Browne RM, Tobias RS (1986). Microbial microleakage and pulpal inflammation: a review. Endod Dent Traumatol2:177-183.
20.
Buonocore MG (1975). The use of adhesives in dentistry. Springfield, IL: Charles C Thomas.
21.
Buonocore MG, Wileman W., Brudevold F. (1956). A report on a resin composition capable of bonding to human dentin surfaces. J Dent Res35:846-851.
22.
Burjanadze TV (1992). Thermodynamic stabilization of water-bridged collagen structure. Biopolymers32:941-949.
23.
Burke FIT, McCaughey AD (1995). The four generations of dentin bonding. Am J Dent8:88-92.
24.
Burrow MF, Taniguchi Y., Nikaido T., Satah M., Inai N., Tagami J., et al. (1995). Influence of temperature and relative humidity on early bond strengths to dentine. J Dent23:41-45.
25.
Burstein AH, Zika JM, Heiple KG, Klein L. (1975). Contribution of collagen and mineral to the elastic-plastic properties of bone. J Bone Jt Surg57(A):956-961.
26.
Carvalho RM, Yoshiyama M., Pashley EL, Pashley DH (1996). In vitro study on the dimensional changes of dentine after demineralization. Arch Oral Biol41:369-377.
27.
Carvalho RM, Souza MHS, Yoshiyama M., Pashley DH (1997). Effects of dehydration on the modulus of elasticity of demineralized human dentin. Rev Fac Odontol Bauru (in press).
28.
Causton BE (1984). Improved bonding of composite restorative to dentine. Br Dent J156:93-95.
29.
Chappell R., Eick J. ( 1994). Shear bond strength and scanning electron microscopic observation of six current dentinal adhesives. Quintessence Int25:359-368.
30.
Chappell RP, Cobb CM, Spencer P., Eick JD ( 1994). Dentinal tubule anastomosis: a potential factor in adhesive bonding? J Prosthet Dent72:183-188.
31.
Chappelow C., Miller R., Bowles C., Pinzino C., Power M., Eick D. ( 1996). Dentin bonding and isocyanatoacrylate copolymers-"reactive primer" effects (abstract). J Dent Res75(Spec Iss):347.
32.
Ciucchi B., Bouillaguet S., Holz J., Pashley DH (1995). Dentinal fluid dynamics in human teeth, in vivo. J Endodont21:191-194.
33.
Clarkson BH, Feagin FF, McCurdy SP, Sheetz JH, Speirs R. (1991). Effects of phosphoprotein moieties on the remineralization of human root caries. Caries Res25:166-173.
34.
Cobb DS, Vargas MA, Armstrong SR (1995). Shear strengths between acid-etched and deproteinized dentin surfaces (abstract). J Dent Res74(Spec Iss):35.
35.
Cox CF, Suzuki S. (1994). Re-evaluating pulp protection: calcium hydroxide liners vs. cohesive hybridization. J Am Dent Assoc125:823-831.
36.
Currey ) J. (1984) The mechanical adaptations of bones. Princeton, NJ: Princeton University Press.
37.
Daculsi G., Kerebel B., LeCabellec M-T., Kerebel L-M. (1979). Qualitative and quantitative data on arrested caries in dentine. Caries Res13:190-202.
38.
Davidson CL, De Gee AJ (1984). Relaxation of polymerization contraction stresses by flow in dental composites. J Dent Res63:146-148.
39.
DeBruyne NA, Howwink R. (1951). Adhesion and adhesives. London: Elsevier Press.
40.
De Gee AJ, Feilzer AJ, Davidson CL (1993). True linear polymerization shrinkage of unfilled resins and composites determined with a linometer. Dent Mater9:11-14.
41.
DeGrange M., Attal JP, Theimer K., Eid N. (1993). In vitro tests of dentine bonding systems. In: Proceedings of the International Symposium on the State of the Art of Direct Posterior Filling Materials and Dentine Bonding. VanHerle G, DeGrange M, Williams G, editors. Leuven, Belgium: Van der Poorten n.v.
Eick JD, Wilko RA, Anderson CH, Sorensen SE (1970). Scanning electron microscopy of cut tooth surfaces and identification of debris by use of the electron microprobe. J Dent Res49:1359-1368.
44.
Eick JD, Cobb CM, Chappell R., Spencer P., Robinson SJ (1991). The dentinal surface: its influence on dentinal adhesion. Part 1. Quintessence Int22:967-977.
45.
Eick ID, Robinson SJ, Cobb CM, Chappell R., Spencer P. (1992). The dentinal surface: its influence on dentinal adhesion. Part II, Quintessence Int23:43-51.
46.
Eick JD, Robinson SI, Byerley TJ, Chappelow CC (1993a). Adhesives and nonshrinking dental composites of the future. Quintessence Int24:632-640.
47.
Eick JD, Robinson SJ, Chappell RP, Cobb CM, Spencer P. (1993b). The dentinal surface: its influence on dentinal adhesion. Part III. Quintessence Int24:571-582.
48.
Eick JD, Robinson SI, Byerley TJ, Chappell RP, Spencer P., Chappelow CC (1995). Scanning transmission electron microscopy/energy dispersive spectroscopy analysis of the dentin adhesive interface using a labeled 2-hydroxyethylmethacrylate analogue. J Dent Res74:1246-1252.
49.
Eick D., Miller R., Bowles Q., Chappelow C. (1996a). Dentin bonding and isocyanatoacrylate copolymers-Auger STEM interfacial analysis (abstract).) J Dent Res75(Spec Iss):347.
50.
Eick JD, Miller RG, Robinson SJ, Bowles CQ, Gutshall PL, Chappelow CC (1996b). Quantitative analysis of the dentin adhesive interface by Auger spectroscopy. J Dent Res75:1027-1033.
51.
Eliades GC (1993). Dentine bonding systems. In: Proceedings of the International Symposium on the State of the Art of Direct Posterior Filling Materials and Dentine Bonding. VanHerle G, DeGrange M, Willems G, editors. Leuven, Belgium: Van der Poorten n.v., pp. 49-74.
52.
Eliades G., Palaghias G., Vougiouklakis G. (1990). Surface reactions of adhesives on dentin. Dent Mater6:208-216.
Feilzer AJ, De Gee AJ, Davidson CL (1987). Setting stress in composite resin in relation to configuration of the restoration. I Dent Res66:1636-1639.
55.
Feilzer AJ, De Gee AJ, Davidson CL (1993). Setting stress in composites for two different curing modes. Dent Mater9:2-5.
56.
Ferracane JL (1985). Correlation between hardness and degree of conversion during setting reaction of unfilled dental restorative resins. Dent Mater1:1 11-1 14.
57.
Ferracane JL (1995). Current trends in dental composites. Crit Rev Oral Biol Med6:302-318.
58.
Finger WJ, Inoue M., Asmussen E. (1994). Effect of wettability of adhesive resins on bonding to dentin. Am J Dent7:35-38.
59.
Flory PI (1967). Principles of polymer chemistry. Ithaca, NY: Cornell University Press, pp. 124-126.
60.
Fogel HM, Marshall F.), Pashley DH (1988). Effects of distance from the pulp and thickness on the hydraulic conductance of human radicular dentin. J Dent Res67:1381-1385.
61.
Fukushima T., Horibe T. (1991). Line analysis of interface layer on dentin by means of electron-probe microanalysis. J Biomed Mater Res25:129-140.
62.
Garberoglio R., Brännström M. (1976). Scanning electron microscopic investigation of human dentine tubules. Arch Oral Biol21:355-362.
63.
Glimcher MG (1981). On the form and function of bone: from molecules to organs: Wolff's law revisited. In: The chemistry and biology of mineralized connective tissues. Veis A, editor. New York, NY: Elsevier /North Holland, pp. 617-673.
64.
Grippo JO (1991). Abfractions: a new classification of hard tissue lesions of teeth. J Esthet Dent3:14-19.
65.
Grogono A., Mayo J. ( 1993). Root caries: preliminary investigation using dentin adhesives to prevent demineralization (abstract). J Dent Res72(Spec Iss):318.
66.
Gwinnett AJ (1977). The morphologic relationship between dental resins and etched dentin. J Dent Res56:1155-1159.
67.
Gwinnett AJ (1993). Quantitative contribution of resin infiltration/hybridization to dentin bonding. Am J Dent6:7-9.
68.
Gwinnett A.] (1994a). Dentin bond strength after air drying and rewetting. Am I Dent7:144-148.
69.
Gwinnett AJ (1994b). Altered tissue contribution to interfacial bond strength with acid conditioned dentin. Am J Dent7:243-246.
70.
Gwinnett AJ (1994c). Mechanical removal of the smear layer. Asian J Esthet Dent2:3-6.
71.
Gwinnett AJ (1994d). Chemically conditioned dentin: a comparison of conventional and environmental scanning electron microscopy. Dent Mater10:150-155.
72.
Gwinnett AJ, Buonocore MG (1965). Adhesives and caries prevention: a preliminary report. Br J Dent119:77-80.
73.
Gwinnett AJ, Kanca I. (1992a). The micromorphology of the bonded dentin interface and its relationship to bond strength. Am J Dent5:73-77.
74.
Gwinnett AJ, Kanca J. (1992b). Micromorphological relationship between resin and dentin in vivo and in vitro. Am J Dent5:19-23.
75.
Gwinnett AJ, Ripa LW ( 1973). Penetration of pit and fissure sealants into conditioned enamel in vivo. Arch Oral Biol18:435-439.
76.
Gwinnett AJ, Tay FR, Wei SHY (1995a). From "overwet to "overdry": the "window of opportunity" for complete hybridization (abstract). Trans Acad Dent Mater8:6.
77.
Gwinnett AJ, Tay FR, Pang KM, Wei SHY (1995b). Quantitative contribution of the collagen network in dentin hybridization (abstract). J Dent Res74(Spec Iss):403.
78.
Gwinnett AJ, Tay FR, Pang KW, Wei SHY (1996). Bridging the gap between the overdry and overwet bonding phenomenon: optimization of dentin hybridization and tubule seal. In: Dentin/pulp complex. Shimono M, Maeda T, Suda H, Takahashi K, editors. Tokyo: Quintessence Publishing Co. Ltd., pp. 359-363.
79.
Hanaizumi Y., Matsui I., Kobayashi Y., Inoue S., Kawakami S., Komatsu H., et al. (1993). Morphological observations of resin penetrated layer using cell-maceration and KOH-digestion method. Jpn J Conserv Dent36:701-711.
80.
Harnirattisai C., Inokoshi S., Shimada Y., Hosoda H. (1993). Adhesive interface between resin and dentin of cervical erosion/abrasion lesions. Oper Dent18:138-143.
81.
Hohling HJ, Steffens H., Heuck F. (1972). Untersuchungen zur Mineralisierungsdichte im Hartgewebe mit Protein-Polysaccharid bzw. mit kollagen als Hauptbestandteil der Matrix. Elektronenmikroskopie und Elektronenstrahl-Mikroanalyse am Dentin und Osteopetrose-Knochen. Zeitschrift f. ZellForschung Mikroskopische Anatomie134:283-296.
82.
Hoppenbrouwers PMM, Driessens FCM, Borggreven JMPM (1986). The vulnerability of unexposed human dental roots to demineralization. J Dent Res65:955-958.
83.
Hoppenbrouwers PMM, Driessens FCM, Borggreven JMPM (1987). The demineralization of human dental roots in the presence of fluoride. J Dent Res66:1370-1374.
84.
Hughes NP, Littlewood D., Macpherson JV, Beestron MA, Unwin PR (1996). Direct measurement of fluid flow rate in dentinal tubules using scanning electro-chemical microscopy. In: Dentin/pulp complex. Shimono M, Maeda T, Suda H, Takahashi K, editors. Tokyo: Quintessence Publishing Co. Ltd., pp. 333-335.
85.
Huntsberger JR (1964). Wetting and adhesion. Chem Engng News42:82.
86.
Ikami K., Fukushima M., Usami Y., Iwaku M. (1993). Effects of surface conditioners on dentin structure (abstract). J Dent Res72(Spec Iss):211.
87.
Imai Y., Suzuki A. (1994). Effects of water and carboxylic acid monomer on polymerization of HEMA in the presence of N-phenylglycine. Dent Mater10:275-277.
88.
Imai Y., Kadoma Y., Kojima K., Akimoto T., Okakura K., Ohta T. ( 1991). Importance of polymerization initiator systems and interfacial initiation of polymerization in adhesive bonding of resin to dentin. J Dent Res70:1088-1091.
89.
Inokoshi S., Hosoda H., Harniratissai C., Shimida Y., Tatsumi T. (1990). A study on the resin-impregnated layer of dentin: part I. A comparative study on the decalcified and undecalcified sections and the application of argon ion beam etching to disclose the resin-impregnated layer of dentin. Jpn J Conserv Dent33:427-442.
90.
Itou K., Toril Y., Suzuki K., Nakai H., Inoue K. (1994). Adhesion of restorative resin to tooth: adhesion promoted by Liner Bond II. Adhes Dent12:174-181.
91.
Iwaku M., Nakamichi I., Horie K., Suizu S., Fusayama T. (1981). Tags penetrating dentin of a new adhesive resin. Bull Tokyo Med Dent Univ28:45-51.
92.
Jacobsen T., Soderholm K-J. (1995). Some effects of water on dentin bonding. Dent Mater11:132-136.
93.
lendresen MD, Glantz PO (1981). Clinical adhesiveness of selected dental materials. Acta Odontol Scand39:39-45.
94.
Jepson KJ, Mansours MK, Kuhn JL, Jaenisch R., Bonadio JF, Goldstein SA (1992). An in vivo assessment of the contribution of type I collagen to the mechanical properties of cortical bone (abstract). Trans Orthop Res17:93.
95.
Kadoma Y., Imai Y. ( 1989). Studies on visible-light initiator system using thiobarbituric acid derivatives. J Jpn Dent Mater8:533-538.
96.
Kanca J. (1992a). Improving bond strength through acid etching of dentin and bonding to wet dentin surfaces. I Am Dent Assoc123:35-43.
97.
Kanca J. (1992b). Resin bonding to wet substrate. I. Bonding to dentin. Quintessence Int23:39-41.
98.
Kinney JH, Balooch M., Marshall SI, Marshall GW, Weih TM ( 1996). Hardness and Young's modulus of peritubular and intertubular dentine. Arch Oral Biol39:185-190.
99.
Kiyomura M. (1987). Bonding strength to bovine dentin with 4-META/MMA-TBB resin: long-term stability and influence of water. Dent Mater6:860-872.
100.
Koutsi V., Noonan RG, Horner JA, Simpson MD, Matthews WG, Pashley DH (1994). The effect of dentin depth on the permeability and ultrastructure of primary molars. Pediatr Dent16:29-35.
101.
Kramer IRH, McLean JW (1952). Alterations in the staining reactions of dentine resulting from a constituent of a new self polymerizing resin. Br Dent J92:150-153.
102.
Krejci I., Sparr D., Lutz F. ( 1987). A three-sited light-curing technique for conventional class II composite resin restorations. Quintessence Int18:125-131.
103.
Lee HL, Swartz ML (1970). Surface preparation and various resins. In: Adhesion in biologic systems. Manly RS, editor. New York: Academic Press, p. 272.
104.
LeGeros RZ (1981). Calcium phosphates in oral biology and medicine. In: Monographs in oral science. Vol. 15. New York, NY: Karger, pp. 2, 114-119.
LeGeros RZ, LeGeros JP, Trautz OR, Klein E. (1970). Spectral properties of carbonate in carbonate-containing apatites. Dev Appl Spectrosc7(B):3-12.
107.
Lin C.-P., Douglas WH (1994). Failure mechanisms at the human dentin-resin interface: a fracture mechanics approach. J Biomechan27:1037-1047.
108.
Lutz F., Krejci I., Barbakow F. (1991). Quality and durability of marginal adaptation in bonded composite restorations. Dent Mater7:107-113.
109.
Maciel K., Carvalho RM, Ringle RD, Preston CD, Russell CM, Pashley DH (1996). The effects of acetone, ethanol, HEMA, and air on the stiffness of human demineralized dentin. J Dent Res75:1851-1858.
110.
Marshall GW (1993a). Characterization of dentin and adhesive considerations. In: Transactions of the 2nd International Congress on Dental Materials. Okabe T, Takahashi S, editors. Academy of Dental Materials, pp. 22-32.
111.
Marshall GW (1993b). Dentin: microstructure and characterization. Quintessence Int24:606-617.
112.
Marshall GW, Balooch M., Tench RL, Kinney JH, Marshall SJ (1993) Atomic force microscopy of acid effects on dentin. Dent Mater9:265-268.
113.
Marshall GW, Marshall SJ, Kinney JH, Balooch M. (1997). Dentin structure and properties. J Dent (in press).
114.
Miller RG (1995). Adhesive bonding to dentin with isocyanate copolymers (PhD dissertation). Columbia, MO: University of Missouri.
115.
Miller RG, Bowles CQ, Eick ID, Gutshall PL (1993). Auger electron spectroscopy of dentin: elemental quantification and the effects of electron and ion bombardment. Dent Mater9:280-285.
116.
Miller RG, Bowles CO, Gutshall PL, Eick JD ( 1994). The effects of ion sputtering on dentin and its relation to depth profiling. J Dent Res73:1457-1461.
117.
Mitchem JC, Gronas DG (1986). Effects of time after extraction and depth of dentin on resin dentin adhesives. J Am Dent Assoc113:285-287.
118.
Mixson JM, Spencer P., Moore DL, Chappell RP, Adams S. (1995), Surface morphology and chemical characterization of abrasion/erosion lesions. Am J Dent8:5-9.
119.
Mjör IA, Fejerskov O. (1979). Histology of the human tooth. 2nd ed. Copenhagen: Munksgaard.
120.
Mjor IA, Nordahl I. (1996). The density and branching of dentinal tubules in human teeth. Arch Oral Biol38:541-546.
121.
Nakabayashi N. (1982). Resin reinforced dentine due to infiltration of monomers into dentine at the adhesive interface. Dent Mater J1:78-81.
122.
Nakabayashi N. (1984). Biocompatibility and promotion of adhesion to tooth substrates. CRC Crit Rev Biocompatibil1:25-52.
123.
Nakabayashi N. (1992). The hybrid layer: a resin-dentin composite. Proc Finn Dent Soc88(Suppl 1):321-330.
124.
Nakabayashi N., Kojima K., Masuhara E. (1982). Studies on dental self-curing resins: adhesion to dentin by mechanical interlocking. Dent Mater1:74-77.
125.
Nakabayashi N., Ashizawa M., Nakamura M. (1992). Identification of a resin-dentin hybrid layer in vital human dentin created in vivo: durable bonding to dentin. Quintessence Int23:135-141.
126.
Nakabayashi N., Saimi Y., Watanabe I. (1995). Effect of smear layer on bonding to dentin (abstract). J Dent Res74(Spec Iss):88.
127.
Nakajima M., Sano H., Burrow MF, Tagami J., Yoshiyama M., Ebisu S., et al. (1995). Tensile bond strength and SEM evaluation of caries-affected dentin using dentin adhesives. J Dent Res74:1679-1688.
128.
Nakamichi I., Iwaku M., Fusayama T. (1983). Bovine teeth as possible substitutes in the adhesion test. J Dent Res62:1076-1081.
129.
Nara Y., Katsuyama S., Dogon IL (1994). A comparison of the adhesion of two new restorative systems to dentin with wedge-shaped defects (abstract). J Dent Res73(Spec Iss):130.
130.
Nery W., McCabe JF, Wassell RW (1995). A comparative study of three dental adhesives. ) J Dent23:55-61.
131.
Nikaido T., Yamada T., Koh Y., Burrow MF, Takatsu T. (1995). Effect of air-powder polishing on adhesion of bonding systems to tooth substrates. Dent Mater11:258-264.
132.
O'Brien WJ (1973). Capillary effects on adhesion. In: Symposium proceedings on adhesive dental materials. Moskowitz B, editor. New York, NY: New York University Press, pp. 64-81.
133.
O'Sullivan R., Flannelly M. (1990). Leeuwenhoek and the structure of dentin. J Irish Dent Assoc36:129-133.
134.
Outhwaite WC, Livingston MJ, Pashley DH (1976). Effects of changes in surface area, thickness, temperature and post-extraction time on human dentine permeability. Arch Oral Biol21:599-603.
135.
Pashley DH (1989). Dentin: a dynamic substrate. Scan Microsc3(1):161-176.
136.
Pashley DH (1992). The effects of acid etching on the pulpodentin complex. Oper Dent17:229-242.
137.
Pashley DH, Andringa HJ, Derkson GD, Derkson ME, Kalathoor S. (1987). Regional variability in dentine permeability. Arch Oral Biol32:519-523.
138.
Pashley DH, Horner JA, Brewer PD (1992). Interactions of conditioners on the dentin surface. Oper Dent Suppl5:137-150.
139.
Pashley DH, Ciucchi B., Sano H., Horner JA (1993). Permeability of dentin to adhesive resins. Quintessence Int24:618-631.
140.
Pashley DH, Ciucchi B., Sano H. ( 1994). Dentin as a bonding substrate. Dtsch Zahnärtzl Z49:760-763.
141.
Pashley DH, Ciucchi B., Sano H., Carvalho RM, Russell CM (1995). Bond strength versus dentine surface: a modeling approach. Arch Oral Biol40:1109-1118.
142.
Pashley EL, Talman R., Horner JA, Pashley DH (1991). Permeability of normal versus carious dentin. Endod Dent Traumatol7(5):207-211.
143.
Perdigão J. (1995). An ultra-morphological study of human dentine exposed to adhesive systems (PhD thesis). Leuven, Belgium: Catholic University of Leuven.
144.
Phillips RW, Ryge G. ( 1961). Adhesive restorative dental materials. Proceedings of a workshop. Spencer, IN: Owen Litho.
145.
Power M., Chappelow C., Pinzino C., Eick D., Miller R., Bowles C. (1996). Dentin bonding and isocyanatoacrylate copolymers-bulk polymerization and characterization (abstract). J Dent Res75(Spec Iss):347.
146.
Prati C., Pashley DH (1992). Dentin wetness, permeability, thickness, and bond strength of adhesive systems. Am I Dent5:33-38.
147.
Prati C., Erickson R., Tao L., Simpson M., Pashley DH (1991). Measurement of dentin permeability and wetness using the Periotron device. Dent Mater7:268-273.
148.
Prati C., Ferrieri P., Galloni C., Mongiorgi R., Davidson CL (1995). Dentine permeability and bond quality as affected by new bonding systems. J Dent23:217-226.
Reeder DW, Walton RE, Livingston MJ, Pashley DH (1978). Dentin permeability: determinants of hydraulic conductance. J Dent Res57:187-193.
151.
Rivera EM, Yamauchi M. (1993). Site comparisons of dentine collagen cross-links from extracted human teeth. Arch Oral Biol38:541-546.
152.
Rueggeberg FA, Craig RG (1988). Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res67:932-937.
153.
Rueggeberg FA, Tamareselvy K. (1995). Resin cure determination by polymerization shrinkage. Dent Mater11:265-268.
154.
Ruse ND, Smith DC (1991). Adhesion to bovine dentin-surface characterization. J Dent Res70:1002-1008.
155.
Ruyter IE (1982). Methacrylate-based polymeric dental materials: conversion and related properties. Acta Odontol Scand40:359-376.
156.
Ruyter IE, ysæd H. ( 1987). Composites for use in posterior teeth: composition and conversion. J Biomed Mater Res21:11-23.
157.
Sano H., Ciucchi B., Matthews WG, Pashley DH (1994a). Tensile properties of mineralized and demineralized human and bovine dentin. J Dent Res73:1205-1211.
158.
Sano H., Shono T., Sonoda H., Takatsu T., Ciucchi B., Carvalho R., et al. (1994b). Relationship between surface area for adhesion and tensile bond strength-evaluation of a micro-tensile bond test. Dent Mater10:236-240.
Sano H., Takatsu T., Ciucchi B., Russell CM, Pashley DH (1995b). Tensile properties of resin-infiltrated demineralized dentin. J Dent Res74:1092-1102.
161.
Sano H., Yoshiyama M., Ebisu S., Burrow MF, Takatsu T., Ciucchi B., et al. (1995c). Comparative SEM and TEM observations of nanoleakage within the hybrid layer. Oper Dent20:160-167.
162.
Simmelink JW, Nygaard VK, Scott DB (1974). Penetration of resins into partially demineralized enamel in vitro. J Dent Res53:731-735.
163.
Spencer P., Byerley TJ, Eick JD, Witt JD ( 1992). Chemical characterization of the dentin/adhesive interface by Fourier transform infrared photoacoustic spectroscopy. Dent Mater8:10-15.
164.
Stangel I., Dickens SH, Antonucci JM (1995). Dentin protein loss after acid conditioning: an FTIR study (abstract). J Dent Res74(Spec Iss):88.
Suzuki T., Finger WJ (1988). Dentin adhesives: site of dentin versus bonding of composite resins. Dent Mater4:379-383.
167.
Sweeney TE, Beuchat CA (1993). Limitations of methods of osmometry: measuring the osmolality of biological fluids. Am J Physiol264:R469-R480.
168.
Swift EJ, Perdigao J., Heymann HO (1995). Bonding to enamel and dentin: a brief history and state of the art. Quintessence Int26:95-110.
169.
Tagami J., Hosoda H., Burrow MF, Nakajima M. (1992). Effect of aging and caries on dentin permeability. Proc Finn Dent Soc88(Suppl):149-154.
170.
Tagami J., Inai N., Takatsu T. (1995). Microstructure evaluation of the resin dentin interface (abstract). J Dent Res74(Spec Iss):89.
171.
Takarada K., Kojima M., Ishihara K., Nakabatashi N. (1990). Durability of bonding between 4-META/MMA-TBB resin to dentin pretreated with 10-3-the effect of 10-3 pretreated period and subsequent glutaraldehyde treatment. Dent Mater J9:831-840.
172.
Tam LE, Pilliar RM (1993). Fracture toughness of dentinal composite adhesive surfaces. J Dent Res72:953-959.
173.
Tam LE, Pilliar RM (1994). Fracture surface characterization of dentin-bonded interfacial fracture toughness specimens. J Dent Res73:607-619.
174.
Tao L., Pashley DH, Boyd L. ( 1988). Effect of different types of smear layers on dentin and enamel shear bond strengths. Dent Mater4:208-216.
175.
Tao L., Tagami J., Pashley DH (1991). Effects of pulpal pressure on bond strengths of Superbond and Gluma. Am J Dent4:73-76.
176.
Tatsumi T., Inokoshi S., Yamada T., Hosoda H. (1992). Remineralization of etched dentin. J Prosthet Dent67:617-620.
177.
Tay FR, Gwinnett AJ, Pang KM, Wei SHY (1994). Structural evidence of a sealed tissue interface with total etch wet bonding technique, in vivo. J Dent Res73:629-636.
178.
Tay FR, Gwinnett AJ Pang KM, Wei SHY (1995). Variability in microleakage observed in a total-etch wet-bonding technique under different handling conditions. J Dent Res74:1168-1178.
179.
Tay FR, Gwinnett AJ, Pang KM, Wei SHY (1996a). The overdry phenomenon: contribution of intertubular and intratubular resin permeation through acid-conditioned dentin. In: Dentin/pulp complex. Shimono M, Maeda T, Suda H, Takahashi K, editors. Tokyo: Quintessence Publishing Co. Ltd., pp. 339-344.
180.
Tay FR, Gwinnett AJ, Pang KM, Wei SHY (1996b). The overwet phenomenon: an optical, micromorphological study of surface moisture in the total etched resin-dentin interface. Am J Dent9:43-48.
181.
Tay FR, Gwinnett AJ Pang KM, Wei SHY (1996c). Resin permeation into acid-conditioned, moist, and dry dentin: a paradigm using water-free adhesive primers. J Dent Res75:1034-1044.
182.
Thomas HF (1985). The dentin-predentin complex and its permeability: an anatomical overview. J Dent Res64(Spec lss):607-612.
183.
Titley K., Chernecky R., Maric B., Valiquette N., Smith DC (1994). The morphology of the demineralized layer in primed dentin. Am J Dent7:22-26.
184.
Uno S., Finger WJ (1995). Function of the hybrid zone as a stress-absorbing layer in resin-dentin bonding. Quintessence Int26:733-738.
185.
Van Meerbeek B., Inokoshi S., Braem M., Lambrechts P., Vanherle G. (1992a). Morphological aspects of the resin-dentin interdiffusion zone with different dentin adhesive systems. J Dent Res71:1530-1540.
186.
Van Meerbeek B., Vanherle G., Lambrechts P., Braem M. (1992b). Dentin- and enamel-bonding agents. Perio Rest Dent2:117-127.
187.
Van Meerbeek B., Dhem A., Coret-Niçaise M., Braem M., Lambrechts P., Vanherle G. (1993a). Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone. J Dent Res72:495-501.
188.
Van Meerbeek B., Mohrbacher H., Celis JP, Roos JR, Braem M., Lambrechts P., et al. (1993b). Chemical characterization of the resin-dentin interface by micro-Raman spectroscopy. J Dent Res72:1423-1428.
189.
Van Meerbeek B., Willems G., Celis JP, Roos JR, Braem M., Lambrechts P., et al. (1993c). Assessment by nanoindentation of the hardness and elasticity of the dentin-resin bonding area. J Dent Res72:1434-1442.
190.
Van Meerbeek B., Braem M., Lambrechts P., Vanherle G. (1994). Morphological characterization of the interface between resin and sclerotic dentine. J Dent22:141-146.
191.
Van Meerbeek B., Conn LJ Jr, Duke ES, Eick JD, Robinson SJ, Guerrero D. (1996). Correlative transmission electron microscopy examination of nondemineralized and demineralized resin-dentin interfaces formed by two dentin adhesive systems. J Dent Res75:879-888.
192.
Van Noort R., Howard IC, Cardow G. (1989). A critique of bond strength measurement. J Dent17:61-67.
193.
Van Noort R., Cardow GE, Howard IC, Noroozi S. (1991). The effect of local interfacial geometry on the measurements of the tensile bond strength to dentin. J Dent Res70:889-893.
194.
Veis A. ( 1983). Dentine composition. In: Handbook of experimental aspects of oral biochemistry. Lazzari EP, editor. Boca Raton, FL: CRC Press.
195.
Wakabayashi Y., Kondou Y., Suzuki K., Yatani H., Yamashita A. (1994). Effect of dissolution of collagen on adhesion to dentin. Int J Prosthodont7:302-306.
196.
Wake WC ( 1982). Adhesion and the formulation of adhesives. 2nd ed. London: Elsevier, 326 pp.
197.
Wang JD, Hume WR ( 1988). Diffusion of hydrogen ion and hydroxyl ion from various sources through dentine. Int Endodont J21:17-21.
198.
Watanabe 1, Nakabayashi N., Pashley DH (1994). Bonding to ground dentin by a Phenyl-P self-etching primer. J Dent Res73:1212-1220.
199.
Wendt SL (1987). The effect of heat used as secondary cure upon the physical properties of three composite resins. II. Wear, hardness, and color stability. Quintessence Int18:351-356.
Yoshiyama M., Sano H., Ebisu S., Tagami J., Ciucchi B., Carvalho RM, et al. (1996a). Regional tensile bond strengths of cervical sclerotic root dentin. J Dent Res75:1404-1413.
202.
Yoshiyama M., Carvalho RM, Sano H., Horner JA, Brewer PD, Pashley DH (1996b). Regional bond strengths of resins to human root dentine. J Dent24:435-442.
203.
Zisman WA (1964). Contact angle, wettability, and adhesion. In: Advances in chemistry series. Washington, DC: American Chemical Society, p. 64.
