Fiber Optic Sensing of a Bridge in Waterbury,Vermont

Abstract

The use of fiber optic sensors for the internal state measurements of large civil structures has been increasing in recent years. Sensors are embedded into the reinforced concrete structure in order to obtain information about the internal structural health and overall structural performance. The installation process is of utmost importance for if incorrectly done, the sensors will not withstand the rigorous conditions present during the construction and concrete pouring process. A detailed description of the sensor installation and excavation process undertaken when a suite of fiber optic sensors were embedded into a 67 m long steel truss bridge spanning the Winooski River in Waterbury, Vermont (USA) arise is presented.

Get full access to this article

View all access options for this article.

References

Barbachi M. and J-M Caussignac ,. 1996. "Development of a single-mode optical fiber sensor for civil engineering applications," Proc. Smart Sensing, Processing and Instrumentation, San Diego, SPIE Vol. 2718:39-407.

Caussignac J. M. , A. Chabert , G. Morel , P. Rogez and J. Seantier . 1992. "Bearings of a bridge fitted with load measuring devices based on an optical fiber technology," Proc. 1st Euro. Conf. on Smart Struct. and Mat., Glasgow, SPIE Vol. 1777:207-210.

Dakin J. P. and Wade C. A. 1984. Electronics Letters. 20:51-53.

Escobar P , V Gusmeroli V and M. Martinelli . 1992. "Fiber-optic interferometric sensors for concrete structures," Proc. 1st Euro. Conf. on Smart Struct. and Mat., Glasgow, SPIE Vol. 1777:215-218.

Fuhr P. L. and B. L. Anderson 1988. "Fiber Optic Sensors Embedded in Concrete," 1988 Vermont-NSF EPSCoR Conf. Sci. and Tech. II Report VT-2:145-149.

Fuhr, P. L. , D. R. Huston , P. J. Kajenski , and T. P. Ambrose . 1992. "Performance and Health Monitoring of the Stafford Medical Building Using Embedded Sensors," Journal of Smart Materials and Structures, l(1):61-65.

Fuhr P. L. , D. R. Huston. P. J. Kajenski , and D. M. Snyder . 1993. "Stress Monitoring of Concrete Using Embedded Optical Fiber Sensors," Journal of Structural Engineering, 119:2263-2269.

Fuhr P. L. and Huston D. R. 1998. "Embedded Sensors for Improved Maintenance and Assessment of Roadways and Bridges," Journal of Smart Materials and Structures, 7(1):151-158.

Holst A , W Habel and R. Lessing . 1992. "Fiber-optic intensity-modulated sensors for continuous observation of concrete and rock-fill dams," Proc. 1st Euro. Conf. on Smart Struct. and Mat., Glasgow, SPIE Vol. 1777:223-226.

10.

Huston D. R. , Fuhr P. L. and Ambrose T. P. 1994. Journal of Smart Materials and Structures, 3(1) 129-139.

11.

Kajenski P. J. , Fuhr P. L. , and Huston D. R. , 1992. "Mode Coupling and Phase Modulation in Vibrating Multimode Waveguides," Journal of Lightwave Technology.

12.

Kruschwitz B , R. Claus , K. Murphy , R. G. May and M. F Gunther . 1992. "Optical fiber sensors for the quantitative measurement of strain in concrete structures," Proc. 1st Euro. Conf. on Smart Struct. and Mat., Glasgow, SPIE Vol. 1777:241-244.

13.

May R. G. , R. 0. Claus , and K. A. Murphy . 1992. "Preliminary evaluation for developing smart ropes using embedded sensors," Proc. 1st Euro. Conf. on Smart Struct. and Mat., Glasgow, SPIE Vol. 1777:155-158.

14.

McPadden A. 1997. "Fiber Optic Corrosion Sensing," M.S. thesis, University of Vermont, Burlington, VT.

15.

Measures R. M. 1992 Composite Engineering, 2:597-618.

16.

Measures R. M. , A. T. Alavie , R. Maaskent , M. Ohn , S. Karr and S. Y. Huang . 1994. "Bragg grating structural sensing system for bridge monitoring," Proc. Distributed and Multiplexed Fiber Optic Sensors Conf. Orlando, SPIE Vol. 2294:53-59.