Integrated Interfaces for Low-Cost Multiple-Sensor Systems

Abstract

The paper reviews the architecture and design of low-cost high-performance sensor systems. These systems consist of a number of multiplexed sensor elements, sensor-specific front-ends, modifiers and microcontroller or digital signal processors (DSPs). Important properties that act as focus points for the system design are: adaptability, accuracy, dynamic range, speed, power consumption, reliability and costs. To enable low-cost design and implementation, a universal set-up, using universal components, is used. Universal sensor interfaces with front-ends for resistive, capacitive, resistive-bridge sensing elements, as well as voltage-, current-and charge-generating sensing elements are discussed. The analog sensor signals are converted to analog signals in the time domain using period-modulated oscillators. The A/D conversion of the time-domain signal can be implemented in the microcontroller or DSP. It is shown that, also in this case, the principles of the sigma-delta converters can be applied. The paper shows that in a systematic overall design approach it is even possible to reduce many of the physical nonidealities of the sensor elements. As an example, the paper deals with the design problems of reliable, high-performance low-cost capacitive sensors. The problems and their solutions of both the physical and the electrical-signal processing are discussed. The examples consider the application of capacitive sensors in position detectors, liquid-level detectors and personnel detectors.

Get full access to this article

View all access options for this article.

References

Analog Devices , 1992, "Signal Conditioners AD 771X Family," Data Sheet, Norwood, USA.

Barney G.C. , 1988, Intelligent Instrumentation, Prentice-Hall, Englewood Cliffs, NJ, ISBN 0-13-468216-5.

De Jong G.W. , Meijer G.C.M. , Lingen K , v.d., Spronck J.W. , Aalsma A.M.M , Bertels ., Th. A.J.M. , 1994, "A smart capacitive absolute angular-position sensor," Sensors and Actuators A, 41-42, pp. 212-216.

De Jong G.W. , Meijer G.C.M. , 1997, "An efficient retrieving algorithm for accurate capacitive position sensors." Sensors and Actuators A, 58, pp. 75-84.

De Jong P.C. , 1996, Dutch Patent Application, nr. 1002732.

De Jong P.C. and G.C.M. Meijer , 1998, "High-temperature pressure transducer interface," Proc. SPIE Conference 3328 on Smart Electronics and MEMS, San Diego, USA.

Howel S. and Hamilton S. , 1992, "Intelligent instruments" in P.H. Sydenham and R. Thorn (eds.), Handbook of Measurement Science, Vol. 3, Wiley, New York, pp.1923-1923.

Li X. , Meijer G.C.M. and Schnitger E.J. , 1997, "A novel smart interface for voltage generating sensors," Proc. IEEE Conference, IMTC 97, Ottawa, Canada, pp. 1472-1475.

Li X., 1997, "Low-cost smart capacitive sensors for position and speed measurement," Ph.D. thesis, Electronic Research Laboratory, Delft University of Technology.

10.

Meijer G.C.M. , 1994, "Concepts and focus point for intelligent sensor systems," Sensors & Actuators, Vol. 41, No. 1-3, pp. 183-191.

11.

Meijer G.C.M. , Van Herwaarden S.A.W. , 1994, "Thermal Sensors," Bristol: Adam Hilger.

12.

Smartec , 1997, Users Guide, Breda, The Netherlands.

13.

Toth F.N. and Meijer G.C.M. , 1992, "A low-cost smart capacitive position sensor," IEEE Trans. on Instr. and Meas., 41, pp.1041-1044.

14.

Toth F.N. , Meijer G.C.M. and Zapico J.A. , 1996, "A low-cost capacitive personnel detector with fuzzy-logic position estimation," Proc. IMTC '96, Brussels, pp. 1270-1274.

15.

Toth F.N. , Meijer G.C.M. and Kerkvliet H.M.M. , 1996, "A. Very Accurate Measurement System for Multielectrode Capacitive Sensors," IEEE Trans. on Instr and Measurement, vol. 45, No. 2, pp. 531-535.

16.

Toth F.N., 1997, "A design methodology for low-cost, high performance capacitive sensors," PhD. thesis. Electronic Research Laboratory, Delft University of Technology.

17.

Toth F.N. and De Jong P.C. , 1997, "Private communication concerning the principles of Y-A converters implemented in microcontrollers."

18.

Van der Goes F.M.L. and Meijer G.C.M. , 1996, "A Novel Low-Cost Capacitive-Sensor Interface," IEEE Trans. on Inst. and Measurement, vol. 45, pp. 536-540.

19.

Van der Goes F.M.L., 1996, "Low-cost smart sensor interfacing," PhD. Thesis, Delft University of Technology.

20.

Van der Goes F.M.L. and Meijer, G.C.M. , 1997, "A simple accurate bridge-transducer interface with continuous autocalibration," IEEE Trans. on Instrumentation and Measurement, vol. 46, no. 3, pp. 704-710.

21.

Van der Goes F.M.L. and Meijer G.C.M. , 1997, "A universal transducer interface for capacitive and resistive sensor elements," Analog Integrated Circuits and Signal Processing, pp. 249-260.

22.

Wang G. and Meijer G.C.M. , 1998, "A smart measurement system for resistive (bridge) or capacitive sensors," Proc. SPIE Conference 3328 on Smart Electronics and MEMS, San Diego, USA.

23.

Wise K.D. , 1993a, "Analog data acquisition circuits in integrated sensing systems," Proc. Workshop Advances in Analogue Circuit Design, Leuven, Belgium.

24.

Wise K.D. , 1993b, "Integrated microinstrumentation systems: smart peripherals for distributed sensing and control," Digest, IEEE Int. Solid State Circ. Conf., San Francisco, CA, USA, pp.126-127.