Optical Sensors and Their Fusion in a Quasi-Smart Structure for Real-Time Vibration Monitoring and Predictive Maintenance of Large Power Electric Power Generators
Restricted accessResearch articleFirst published online November, 1998
Optical Sensors and Their Fusion in a Quasi-Smart Structure for Real-Time Vibration Monitoring and Predictive Maintenance of Large Power Electric Power Generators
Optical accelerometers developed in both fiber and integrated optics technologies and several traditional sensors are integrated in a quasi-smart structure for real-time monitoring and predictive maintenance of large Electric Power Generators. The structures were properly tested in field trials.
Get full access to this article
View all access options for this article.
References
1.
Arregui F. et al., 1996. "Protection and Monitoring System for Hydroelectric Generating Sets," EUROMAINTENANCE'96, Copenhagen, pp. 741-750.
2.
Haykin S. , 1994. Neural Networks: A Comprehensive Foundation, Macmillan Publishing Company, Englewood Cliffs, NJ.
3.
Hoffmann, M. et al., 1994, "Micromechanical Cantilever Resonators with Integrated Optical Interrogation,"Sensors and Actuators A, 44, pp. 71-75.
4.
L6pez-Higuera, J. M. et al., 1998, "Optical Fiber and Integrated Optics Accelerometers for Real Time Vibration Monitoring in Harsh Environments: In-Lab and In-Field Characterization,"European Workshop on Optical Fiber Sensors, SPIE Vol. 3483, pp. 223-227, Peebles (U.K.).
5.
L6pez-Higuera, J.M. , et al., 1997, "Simple Low-Frequency Optical Fiber Accelerometer with Large Rotating Machine Monitoring Applications," to be published in the IEEE Journal of Lightwave Technology.
6.
Luengo, D. et al., 1997. "Simultaneous Sampling by Digital Phase Correction,"IEEE Instrumentation and Measurement Conference, Ottawa, Canada, vol. 2, pp. 980-984.
7.
Lui, T. I. and Mengel J. M.1992. "Intelligent Monitoring of Ball Bearing Condition,"Mech. Syst., Signal Processing, vol. 6, No. 5, pp. 419-431.
8.
Malki, A. et al., 1995, "Optical Fiber Accelerometer Based on a Silicon Micromachined Cantilever,"Applied Optics, vol34, No. 34, pp. 8014-8018.
9.
McCormick A. C. and Nandi A. K.1997. "Real-Time Classification of Rotating Shaft Loading Conditions Using Artificial Neural Networks,"IEEE Trans. on Neural Networks, vol. 8, No. 3, 748-757.
10.
Miers, D. R. , et al., 1987, "Design and Characterization of Fiber Optic Accelerometer,"Fiber optic and laser sensor V, Proc. Soc. Photo-Opt. Instrum. Eng. 938, pp. 421-423.
11.
Morante et al., 1996, "New Approach Using a Bare Fiber Cantilever Beam as a Low Frequency Acceleration Element,"Optical Engineering, 35, 6, pp. 1700-1706.
12.
Ollier, E. , et al., 1998, "A New Optical Vibration Sensor for Harsh Environment-Acoustical and Vibratory Surveillance-Methods and Diagnostic Techniques"CETIM, Senlis.
13.
Ollier, E. , et al., 1997a. "Micro-Opto-Mechanical Vibration Sensor Integrated on Silicon,"MOEMS97, International Conference on Optical MEMS and their applications, November 18-21, Nara, Japan.
14.
Ollier, E. , et al., 1997b, "New Integrated Micro-Opto-Mechanical Vibration Sensor Connected to Optical Fibers,"Electronics letters, vol. 33, no 6.
15.
Oppenheim, A. V. and Schafer R. W.1988, Discrete-Time Signal Processing, Prentice-Hall, Englewood Cliffs, NJ.
16.
Santamarfa, I. et al., 1998. "Improved Procedures for Estimating Amplitudes and Phases of Harmonics with Application to Vibration Analysis,"IEEE Trans. on Instrumentation and Measurement, vol. 47, No. 1, pp. 209-214.
