The controllable rheological behaviour of Electro-Rheological Fluids (ERF) is useful in engineering systems where variable performance is required. In particular the ERF have properties which are changed by an imposed electric field. In this paper a generalised Reynolds equation is solved using finite element techniques in order to simulate the behaviour of misaligned journal bearings lubricated with ERF. The Bingham plastic model is used to described the behaviour of the ERF, when the fluid is in flow mode. It is found that the applied electric field has a substantial influence on the load carrying capacity and the misaligned attitude of the journal bearings. It is concluded that the electric field imposed on the electro-rheological lubricant tends to align the journal in the bearing, making thus the misalignment angle smaller. Thus by changing the electric field it is possible to control the dynamic behaviour of rotor-bearing systems.
Get full access to this article
View all access options for this article.
References
1.
Asanabe, S. , M. Akahoshi and R. Asai. "Theoretical and Experimental Investigation on Misaligned Journal Bearing Performance", Instn. Mech. Engrs.C36/C71.
2.
Bird, R. B. , W. E. Stewart and E. N. Lightfoot. 1960. Transport Phenomena. New York: Wiley and Sons.
3.
Block, H. and J. P. Kelly. 1988. "Review Article Electro-Rheology", Journal of Physics D: Applied Physics, 21:1661-1677.
4.
Buckholtz, R. H. and J. F. Lin. 1986. "The Effect of Journal Bearing Misalignment on Load and Cavitation for Non Newtonian Lubricants", Journal of Tribology, 108:645-654.
5.
Dimarogonas, A. D. and A. Kollias. 1992. "Electro-Rheological Fluid Controlled 'Smart' Journal Bearing", Tribology Transactions35(4): 611-618.
6.
Dubois, G. B. , F. W. Ocvirk, R. L. Wehe and N. Y. Ithaca. 1957. "Properties of Misaligned Journal Bearings", Transaction of the ASME August, Paper No. 56-LUB-7, pp. 1205-1212.
7.
Hill, J. J. and H. V. S. Thomas. 1991. "Response Times of Electro-Rheological Fluids", Journal of Applied Physics, 70(3): 1207-1211.
8.
Klass, D. L. and T. W. Martinek. 1967. "I. Rheological Properties", Journal of Applied Physics, 38:67-74.
9.
Klass, D. L. and T. W. Martinek. 1967. "II. Electrical Properties", Journal of Applied Physics, 38:75-80.
10.
Kollias, A. and A. D. Dimarogonas. 1992. "Rheology of Zeolite and Corn Starch Based ER Fluids at High Shear Strain Rates", Proceedings of the Conference on Recent Advances in Adaptive and Sensory Materials and Their Applications, C. A. Rogers and R. C. Rogers (eds.), pp. 548-558
11.
Kollias, A. and A. D. Dimarogonas. 1994. "Electro-Rheological Fluid Flow in Partial Journal Bearings", ASME Winter Annual Meeting, Electro-Rheological Flows.
12.
Kraynik, A. K.1989. "Comments on ER Fluid Rheology", Proc. 2nd Int. Conference on ER Fluids, J. Carson, A. F. Sprecher and H. Conrad (ed.), Lancaster, PA: Technomic Publ. Co., p. 445.
13.
Leek, T. H. , S. Lingard, R. J. Atkin and W. A. Bullough. 1993. "An Experimental Investigation of the Flow of an Electro-Rheological Fluid in Rayleigh Step Bearing", Journal of Physics D: Applied Physics, 26:1592-1800.
14.
Morishita, S. and J. Mitsui. 1992. "Controllable Squeeze Film Damper (an Application of Electro-Rheological Fluid", Journal of Vibrations and Acoustics, 114:354-357.
15.
Nikolajsen, J. L. and M. S. Hoque. 1990. "An Electro-Viscous Damper for Rotor Applications", Journal of Vibrations & Acoustics, 112:440-443.
16.
Nikolakopoulos, P. G. , C. A. Papadopoulos. 1994. "Nonlinearities in Misaligned Journal Bearings", Tribology International, 27(4): 243-257.
17.
Nikolakopoulos, P. G. and C. A. Papadopoulos. 1995. "High Speed Journal Bearing Lubricated with ER-Fluids. An Experimental Investigation", 5th International Conference on Electro-Rheological Fluids, Magneto-Rheological Suspensions and Associate Technology, Sheffield.
18.
Piggott, R. J. S.1942. "Bearing and Lubrication-Bearing Troubles Traceable to Design Can Be Avoided by Engineering Study", Mechanical Engineering, 64:259.
19.
Shingley, J. E. and C. R. Mischke. 1986. Standard Hand book of Machine Design. New York: McGraw Hill Book Company.
20.
Smalley, A. J. and H. McCallion. 1966-1967. "The Effect of Journal Misalignment on the Performance of a Journal Bearing under Steady Running Conditions", Pro Inst. Engns., 181-1813B-3B.
21.
Tichy, J. A.1991. "Hydrodynamic Lubrication Theory for the Bingham Plastic Model", Journal of Rheology, 35(4):477-496.
22.
Tichy, J. A.1993. "Behaviour of Squeeze Film Damper with an Electrorheological Fluid", Tribology Transactions, 36(1): 127-133.
23.
Wada, H. , H. Hayashi and K. Haga. 1973a. "Behaviour of Bingham Solid in Hydrodynamic Lubrication, Part 2, Application to Step Bearing", Bulletin of the JSME, 16(92):432-440.
24.
Wada, H. , H. Hayashi and K. Haga. 1973b. "Behaviour of Bingham Solid in Hydrodynamic Lubrication, Part 1, General Theory", Bulletin of the JSME, 16(92):422-431.
25.
Winslow, W. M. 1947. "Methods and Means of Translating Electrical Impulses into Mechanical Forces", U.S. Patent, 2, p. 147-150.
