Application of Single Mode Optical Fiber Sensors in Structural Vibration Suppression

Abstract

Optical fibers are small, lightweight, and flexible that can operate over a wide range of environmental conditions and respond to many physical properties. This paper presents two single-mode Michelson interferometric optical fiber sensors for the vibration control application of smart structures. Analysis and experiment show that the length and location of the sensing fiber in the smart structure has to be carefully selected such that the structural vibration amplitude is within the sensor measurement range for linear output. Experiments are also conducted by feeding back the fiber sensor signal to the piezoelectric actuator embedded inside the smart structure so as to suppress structural vibration. The results show that both optical fiber sensors-one with an external piezoelectric modulator and the other with an internal frequency modulated light source-are effective in vibration control application.

Get full access to this article

View all access options for this article.

References

1. Alper, J. M. 1991. "Structural Damage Detection for Smart Structures", Proceedings of the Conference on Optical Fiber Sensor-Based Smart Material and Structures" R. O. Claus , ed., (April), pp. 102-113.

2. Berkoff, T. A. , A. D. Kersey and E. J. Friebele . 1991. "Absolute Strain Sensing Using Fiber Interferometry", Proceedings of the Conference on Optical Fiber Sensor-Based Smart Material and Structures, R. O. Claus , ed., (April), pp. 21-28.

3. Butter, C. D. and G. B. Hocker . 1978. "Fiber Optics Strain Gauge", Appl. Opt., 17(18):2867-2869.

4. Cox, D. E. and D. K. Lindner . 1991. "Active Control for Vibration Suppression in a Flexibie Beam Using a Modal Domain Optical Fiber Sensor", J. of Vibration Acoustics, 113(3):369-382.

5. Davies, D. E. N. and S. A. Kingley . 1974. "Method of Phase Modulating Signals in Optical Fibers: Application to Optical Telemetry Systems", Electron. Lett., 10:21-22.

6. Giallorenzi, T. G. , J. A. Bucaro , A. Dangridge , G. H. Sigel , J. H. Cole , S. C. Rashleigh and R. G. Priest . 1982. "Optical Fiber Sensor Technology", IEEE J. of Quantum Electronics, QE-18(4):626-665.

7. Glossop, N. D. W. , S. Dubois , W. Tsai , M. Leblanc , J. Lymer , R. M. Measures and R. C. Tennyson . 1990. "Optical Fiber Damage Detection for an Aircraft Composite Leading Edge", Composite, 21(1):71-80.

8. Hocker, G. B. 1979. "Fiber-Optic Sensing of Pressure and Temperature", Appl. Opt., 18(9):1445-1448.

9. Jackson, D. A. , R. Priest , A. Dandridge and A. B. Tveten . 1980. "Elimination of Drift in a Single-Mode Optical Fiber Using a Piezoelectrically Stretched Coiled Fiber", Applied Optics, 19(17):2926-2929.

10.

10. Jeffery, I. and R. L. Phillips . 1983. "Synchronous Phase Detection for Optical Fiber Interferometric Sensors", Applied Optics, 22(15): 2329-2336.

11.

11. Jensen, D. W. , J. Pascual and J. M. Cory . 1991. "Dynamic Characterization of Composite Lattice Structure with a Integrated Fiber-Optic Strain Sensor", Adaptive Structures, B. K. Wada , J. L. Fanson and L. Miura , eds., Technomic Publishing, pp. 828-845.

12.

12. Murphy, K. A. , B. R. Fogg and A. M. Vengsarkar . 1992. "Spatially Weighted Vibration Sensors Using Tapered Two-Mode Optical Fibers", J. of Lightwave Technology, 10(11):1680-1687.

13.

13. Reichard, K. M. and D. K. Lindner . 1991. "Strain Measurement in Thin Plates Using Optical Fiber Sensors", Proceedings of the Conference on Optical Fiber Sensor-Based Smart Material and Structures, R. O. Claus , ed., (April), pp. 133-137.

14.

14. Udd, E. 1990. Fiber Optic Sensors: An Introduction for Engineers and Scientists, J. Wiley & Sons Inc.

15.

15. Yang, S. M. and J. W. Chiu . 1993. "Smart Structures-Vibration of Composites with Piezoelectric Materials", Composite Structures, 25:381-386.