The Response of SMA Hybrid Composite Materials to Low Velocity Impact

Abstract

Composite material impact damage tolerance and resistance are often limiting crite ria when composites are considered for critical load bearing applications. Often undetectable to visual inspection, foreign object impact causes varying degrees of damage to composite structures which can initiate fatal material failures under various operating loads. This paper examines a new concept of composite material toughening by embedding small amounts of fibrous superelastic shape memory alloy (SMA) materials into brittle composite materials. In this preliminary study, a 2.8 per cent volume fraction of activated (i.e., superelastic) shape memory alloy fibers were embedded within G40-600/5245C graphite/bismaleimide to create a hybridized composite material. Impact test results show that with the SMA fibers, impact resistance of the hybrid composite materials was increased. At impact energies that perforate the standard graphite/bismaleimide, the SMA fibers stopped perforation of the hybridized composite. Preliminary results show that composite-ply delamination was reduced as much as 25 percent because of the embedded SMA fibers.

Get full access to this article

View all access options for this article.

References

Adams, D.F. and R.S. Zimmerman. 1986. "Static and Impact Performance of Polyethylene Fiber/Graphite Fiber Hybrid Composites", SAMPE Journal , November/December, pp. 10-16.

Cantwell, W.J. and J. Morton. 1990. "Impact Perforation of Carbon Fibre Reinforced Plastic", Composites Science and Technology , 38:119-141.

Cantwell, W.J. and J. Morton. 1991. "The Impact Resistance of Composite Materials-A Review", Composites, 22(5):347-362.

DePorter, G.L. , T.K. Brog and M.J. Readey. 1990. "Structural Ceramics", Metals Handbook , 10th ed., ASM International , 2:1019-1024.

Ishai, O. and C. Hiel. 1992. "Damage Tolerance of a Composite Sandwich with Interleaved Foam Core", Journal of Composites Technology and Research, 14(3):155-168.

Jang, B.Z. , L.C. Chen , C.Z. Wang , H.T. Lm and R.H. Zee. 1989. "Impact Resistance and Energy Absorption Mechanisms in Hybrid Composites", Composites Science and Technology, 34:305-335.

Lagace, P.A. and E. Wolf. 1993. "Impact Damage Resistance of Several Laminated Material Systems", Proceedings of the 34th AIAA Structures, Structural Dynamics and Materials Conference, La Jolla, CA, April 19-22, 1993, AIAA-93-1524-CP, Part 4, pp. 1863-1872.

Lagace, P.A. , J.E. Williamson , P.H. Wilson Tsang , E. Wolf and S. Thomas. 1993. "A Preliminary Proposition for a Test Method to Measure (Impact) Damage Resistance", Journal of Reinforced Plastics and Composites, 12:584-601.

Lee, S.M. and P. Zahuta. 1991. "Instrumented Impact and Static Indentation of Composites", Journal of Composite Matierals , 25:204-222.

10.

Nettles, A.T. and D.G. Lance. 1993. "On the Enhancement of Impact Damage Tolerance of Composite Laminates", Composites Engineering , 3(5):383-394.

11.

Peijs, A.A.J.M. , R.W. Venderbosch and P.J. Lemstra. 1990. "Hybrid Composites Based on Polyethylene and Carbon Fibres, Part 3: Impact Resistant Structural Composites Through Damage Management", Composites, 21(6):522-530.

12.

Sun, C.T. and S. Rechak. 1988. "Effect of Adhesive Layers on Impact Damage in Composite Laminates", Composite Materials: Testing and Design (Eighth Conference), ASTM STP 972, ASTM, pp. 97-123.

13.

Swanson, S.R. 1993. "Mechanics of Transverse Impact in Fiber Composite Plates and Cylinders", Journal of Reinforced Plastics and Composites ; 12:256-267.

14.

Teh, K.T. and J. Morton. 1993. "Impact Damage Development and Residual Compression Performance of Advanced Composite Material Systems", Proceedings of the 34th AIAA Structures, Structural Dynamics and Materials Conference, La Jolla, CA, April 19-22, 1993, AIAA-93-1401-CP, Part 2, pp. 877-886.

15.

Wu, H.T. and G.S. Springer. 1988. "Measurement of Matrix Cracking and Delamination Caused by Impact on Composite Plates", Journal of Composite Materials, 22:518-532.