Compression Strength of Composites Containing Embedded Sensors or Actuators

Abstract

A theoretical linear-elastic model is used to study the effect of embedded sensors and actuators on a composite's compression strength. An existing analytical model is employed to predict the local undulations in the plies which result from the presence of the embedded devices. Using these results in conjunction with a micromechanical model for compression strength, prediction, are made for the reduction in this property due to sensors or actuators. Comparisons are made with ex penmental data for graphite epoxy systems, and the model is shown to accurately predict the trends in such data. Parametric studies are performed to investigate the effect of embedded semor/actuator diameter, laminate thickness, laminate stiffness, and laminate shear strength on the compression strength of composites containing these embedded sensors/actuators. It is shown that degradations in a composite's compression strength is as Severe for sensors/actuators embedded at 30° as those embedded at 90° to the structural fiber,

Get full access to this article

View all access options for this article.

References

Carman, G.P. . C. Paul and G.P. Sendeckyj 1993 "Transverse Strength of Composites Containing Optical Fibers ". Smart Mat and Structures Con ference, Alb , NM

Carman, G.P. and K.L. Reifsnider 1993 "Analytical Optimization of Coating Properties for Actuators and Sensors", J of Intelligent Mat Sw and Struct, 1 214-226

Carman, G.P. and G.P. Sendeckyj "A Review of Mechanics of Embedded Optical Sensors". Comp. Tech (to be submitted)

Dasgupta, A. , Y. Wan , J.S. Sirkis and H. Smgh 1990 "Micro-Mechanical Investigation of an Optical Fiber Embedded in a Laminated Composite", m Fiber Optic Smart Structures and Skins III. E Udd and R O Claus , edv . Proc 1370, pp 119-128

Jensen, D.W. and J. Pascual 1990 "Degradation of Graphite/Bmmaleimide Lammate with Multiple Embedded Fiber Optic Sensors", in Fiber Optic Smart Structures and Skins III, E Udd and R. O Claus, eds Proc 1370, pp 228-237

Jensen. D.W. . J. Pascual and J.A. August 1990 "Performance of Graphite/Bismaleimide Laminates with Embedded Optical Fibers Part 2-Umaxial Compression, Smart Mater- Struct.. 1 31-36.

Jones, R.M. 1975 Mechanics of Composite Materials. Hemisphere Publishing Corporation, p 97

Lesko. J.J. , S.W. Case , B.R. Fogg and G.P. Carman "Embedded Fabry Perot Fiber Optic Stram Rosette Sensor for Internal Stress State Assessment", Amer Soc for Comp 7th Tech Conf on Comp. Mat , Penn State Oc tober 1992

Measures, R.M. , N D W Glossop , J. Lymer , M. Leblanc , J. West , S. Dubois , W. Tsaw and R.C. Tennyon 1989 " Structurally Integrated Fiber Optic Damage Assessment Systems for Composite Materials", Applied Optics. 28(13) 2626-2633

10.

Reddy, J.N. 1984 Etiergi and Variational Methods in Applied Mechanics . Wiley, pp 184-186

11.

Roberts, S.S. and R. Davidson 1991 "Mechanical Properties of Composite Material,, Containing Embedded Fibre Optic Sensors", Fiber Optic Smart Structures and Skins IV, Proc 1588, pp. 326-341

12.

Tsai, S.W. and H.T. Hahn 1980 Introduction to Composite Materials Lancaster, PA Technomic Publishing Co , Inc , pp 414-416

13.

Yarcho, W.B. 1989 "In-House Study to Determme the Effects of Embedded Optical Glass Fiber, on the Strength of Graphite Composite Material", Material,, and Processes Report, Wright Patterson AFB, Flight Dynamic, Lab, MoP-89-Jan-FDBC-006