Minimally Invasive Surgery (MIS) consists of the insertion of a flexible endoscope into the patient body through natural orifices. Over the past few decades, the growing interest in microelectromechanical systems (MEMS) has paved the way for ubiquitous miniaturized integrated sensors and actuators in medical endoscopy. Nowadays, recent advances in materials have opened a promising way to fulfill the surgical requirements and size constraint for the development of smart continuum structures. Among smart materials, electroactive polymers (EAPs) exhibit exceptionally large, fast, repeatable, and reversible motions while perfectly meeting the requirements of micro-integration. However the high applied voltage required for the actuation is not compatible with in vivo medical application. To overcome these issues, a multilayered concept has been proposed. In this work a relaxor ferroelectric electrostrictive polymer is studied for its large electromechanical strain. A wide range of parameters involved in the active material has led us to the development of a finite element model on Abaqus to guide the experimental development. Then, to control this smart endoscopic robot a kinematic and a dynamic models have been built. To test and validate these models a Co-simulation procedure has been developed. This procedure coupled Abaqus and Matlab-Simulink allowing testing proposed control algorithms.
CapsalJ-FGalineauJLeM-Q, et al. (2015) Enhanced electrostriction based on plasticized relaxor ferroelectric p(VDF-TrFE-CFE/CTFE) blends. Journal of Polymer Science Part B Polymer Physics53(19): 1368–1379. Available at: http://doi.wiley.com/10.1002/polb.23776 (accessed 2 November 2022).
9.
ChoYAhnDParkJB, et al. (2016) Enhanced ferroelectric property of p(VDF-TrFE-CTFE) film using room-temperature crystallization for high-performance ferroelectric device applications. Advanced Electronic Materials2(10): 1600225. Available at: https://onlinelibrary.wiley.com/doi/abs/10.1002/aelm.201600225 (accessed 2 November 2022).
10.
DudutaMWoodRJClarkeDR (2016) Multilayer dielectric elastomers for fast, programmable actuation without prestretch. Advanced Materials28(36): 8058–8063. Available at: https://onlinelibrary.wiley.com/doi/10.1002/adma.201601842 (accessed 2 November 2022).
11.
EdbergDL (1987) Control of flexible structures by applied thermal gradients. AIAA Journal25(6): 877–883. Available at: https://arc.aiaa.org/doi/10.2514/3.9715
12.
FreckerMIAguileraWM (2004) Analytical modeling of a segmented unimorph actuator using electrostrictive p(VDF-TrFE) copolymer. Smart Materials and Structures13: 82–91.
13.
GanetFLeMQCapsalJF, et al. (2015) Development of a smart guide wire using an electrostrictive polymer: Option for steer-able orientation and force feedback. Scientific Reports5(1): 18593. Available at: https://www.nature.com/articles/srep18593 (accessed 2 November 2022).
14.
HeBWangZLiQ, et al. (2013) An analytic method for the kinematics and dynamics of a multiple-backbone continuum robot. International Journal of Advanced Robotic Systems10(1): 84. Available at: http://journals.sagepub.com/doi/10.5772/54051
KadookaKTayaMNaitoK, et al. (2015) Modeling of a corrugated dielectric elastomer actuator for artificial muscle applications. In: SPIE smart structures and materials+nondestructive evaluation and health monitoring (Y Bar-Cohen), 01April2015, p.943020. Available at: http://proceedings.spiedigitallibrary.org/proceeding.aspx?doi=10.1117/12.2084733 (accessed 2 November 2022).
LheritierPVaxelaireNTencé-GiraultS, et al. (2020) Influence of field-induced phase transition on poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene) strain. Physical Review Applied14(4): 044061. Available at: https://link.aps.org/doi/10.1103/PhysRevApplied.14.044061
19.
McGoughKAhmedSFreckerM, et al. (2014) Finite element analysis and validation of dielectric elastomer actuators used for active origami. Smart Materials and Structures23(9): 094002. Available at: https://iopscience.iop.org/article/10.1088/0964-1726/23/9/094002 (accessed 2 November 2022).
20.
MurozonoMSumiS (1994) Active vibration control of a flexible cantilever beam by applying thermal bending moment. Journal of Intelligent Material Systems and Structures5(1): 21–29. Available at: https://journals.sagepub.com/doi/10.1177/1045389X9400500103 (accessed 2 November 2022).
21.
O’BrienBCaliusEXieS, et al. (2008) An experimentally valiyeard model of a dielectric elastomer bending actuator. In: The 15th international symposium on: smart structures and materials & nondestructive evaluation and health monitoring (ed YBar-Cohen), 27March2008, p.69270T. Available at: http://proceedings.spiedigitallibrary.org/proceeding.aspx?doi=10.1117/12.776098 (accessed 2 November 2022).
22.
PandyaBNKantT (1988) Finite element analysis of laminated composite plates using a higher-order displacement model. Composites Science and Technology32: 137–155.
23.
PoignetPSzewczykJCattan, et al. (2016) Nouveau concept de robots tubes concentriques micro-actionneurs base de polymres lectro- actifs, PhD Thesis, Université de Franche-Comté, Français, p.269.
24.
TatliciogluEWalkerIDDawsonDM (2007a) New dynamic models for planar extensible continuum robot manipulators. In: 2007 IEEE/RSJ international conference on intelligent robots and systems, pp.1485–1490. New York: IEEE. Available at: http://ieeexplore.ieee.org/document/4399334/
25.
TatliciogluEWalkerIDawsonD (2007b) Dynamic modelling for planar extensible con-tinuum robot manipulators, In: Proceedings 2007 IEEE international conference on robotics and automation, p.6. New York: IEEE.
WebsterRJJonesBA (2010) Design and kinematic modeling of constant curvature continuum robots: A review. The International Journal of Robotics Research29(13): 1661–1683.
