This work presents tuning rules for piezoelectric shunts aiming to mitigate multiple structural resonances. Starting from a specification procedure of the shunt characteristics, the electrical parameters are derived for shunt topologies proposed in the literature, namely Hollkamp’s shunt, the current flowing shunt, the series parallel impedance structure and the current blocking shunt. Effective vibration mitigation of multiple structural modes is demonstrated numerically and experimentally on a piezoelectric beam. Performance in terms of vibration reduction obtained with the different shunts is shown to be comparable if similar shunt characteristics are considered.
AgneniADel SorboMMastroddiF, et al. (2006) Multi-modal damping by shunted piezo-patches: Possible aeroelastic applications. International Journal of Applied Electromagnetics and Mechanics24(1–2): 1–24.
2.
AlexanderCKSadikuMNO (2000) Fundamentals of Electric Circuits. Cambridge: McGraw-Hill Education.
3.
BehrensSMoheimaniSOFlemingAJ (2003) Multiple mode current flowing passive piezoelectric shunt controller. Journal of Sound and Vibration266(5): 929–942.
4.
BerardengoMManzoniSContiAM (2017) Multi-mode passive piezoelectric shunt damping by means of matrix inequalities. Journal of Sound and Vibration405: 287–305.
5.
BerardengoMManzoniSVanaliM, et al. (2021) Enhancement of the broadband vibration attenuation of a resistive piezoelectric shunt. Journal of Intelligent Material Systems and Structures32: 2174–2189.
6.
BerardengoMThomasOGiraud-AudineC, et al. (2016) Improved resistive shunt by means of negative capacitance: New circuit, performances and multi-mode control. Smart Materials and Structures25(7): 075033.
7.
ChenWK (2018) Passive, Active, and Digital Filters. Boca Raton, FL: CRC Press.
8.
CigadaAManzoniSRedaelliM, et al. (2012) Optimization of the current flowing technique aimed at semi-passive multi-modal vibration reduction. Journal of Vibration and Control18(2): 298–312.
9.
Dal BoLHeHGardonioP, et al. (2022) Design tool for elementary shunts connected to piezoelectric patches set to control multi-resonant flexural vibrations. Journal of Sound and Vibration520: 116554.
10.
DarleuxRLossouarnBDeüJF (2020) Broadband vibration damping of non-periodic plates by piezoelectric coupling to their electrical analogues. Smart Materials and Structures29(5): 054001.
11.
EdbergDLBicosASFechterJS (1991) On piezoelectric energy conversion for electronic passive damping enhancement. In: Proceedings of damping, San Diego, CA, 13–15 February, pp.717–724.
12.
FlemingAJBehrensSMoheimaniSOR (2003) Reducing the inductance requirements of piezoelectric shunt damping systems. Smart Materials and Structures12(1): 57–64.
13.
FlemingAJBehrensSReza MoheimaniSO (2002) Optimization and implementation of multimode piezoelectric shunt damping systems. IEEE/ASME Transactions on Mechatronics7(1): 87–94.
14.
FranklinGFPowellJDEmami-NaeiniA (2015) Feedback Control of Dynamic Systems. London: Pearson.
15.
GardonioPZientekMDal BoL (2019) Panel with self-tuning shunted piezoelectric patches for broadband flexural vibration control. Mechanical Systems and Signal Processing134: 106299.
16.
GoldsteinAL (2011) Self-tuning multimodal piezoelectric shunt damping. Journal of the Brazilian Society of Mechanical Sciences and Engineering33(4): 428–436.
17.
HagoodNWvon FlotowA (1991) Damping of structural vibrations with piezoelectric materials and passive electrical networks. Journal of Sound and Vibration146(2): 243–268.
18.
HollkampJJ (1994) Multimodal passive vibration suppression with piezoelectric materials and resonant shunts. Journal of Intelligent Material Systems and Structures5(1): 49–57.
19.
LossouarnBDeüJFKerschenG (2018) A fully passive nonlinear piezoelectric vibration absorber. Philosophical Transactions of the Royal Society A: Mathematical, Physical, and Engineering Sciences376(2127): 20170142.
20.
MoheimaniSORFlemingAJ (2006) Piezoelectric Transducers for Vibration Control and Damping. Advances in Industrial Control. London: Springer-Verlag.
21.
RazeG (2021) Piezoelectric digital vibration absorbers for multimodal vibration mitigation of complex mechanical structures. PhD Thesis, University of Liège, Liège, Belgium.
22.
RazeGDietrichJKerschenG (2021) Passive control of multiple structural resonances with piezoelectric vibration absorbers. Journal of Sound and Vibration515: 116490.
23.
RazeGPaknejadAZhaoG, et al. (2020) Multimodal vibration damping using a simplified current blocking shunt circuit. Journal of Intelligent Material Systems and Structures31(14): 1731–1747.
24.
ShermanJMorrisonWJ (1950) Adjustment of an inverse matrix corresponding to a change in one element of a given matrix. The Annals of Mathematical Statistics21(1): 124–127.
25.
ThomasODeüJFDucarneJ (2009) Vibrations of an elastic structure with shunted piezoelectric patches: Efficient finite element formulation and electromechanical coupling coefficients. International Journal for Numerical Methods in Engineering80(2): 235–268.
26.
ThomasODucarneJDeüJF (2012) Performance of piezoelectric shunts for vibration reduction. Smart Materials and Structures21(1): 015008.
27.
TI (2008) High voltage FET-input operational amplifier. Available at: https://www.ti.com/product/OPA445 (accessed 13 December 2020).
28.
ToftekærJFHøgsbergJ (2020) Multi-mode piezoelectric shunt damping with residual mode correction by evaluation of modal charge and voltage. Journal of Intelligent Material Systems and Structures31(4): 570–586.
29.
WuSY (1996) Piezoelectric shunts with a parallel R-L circuit for structural damping and vibration control. In: Proceedings of the international society for optical engineering (ed JohnsonCD), San Diego, CA, 1 May, vol. 2720), San Diego, CA, 1May, Vol. 2720, pp.259–269.
30.
WuSY (1998) Method for multiple-mode shunt damping of structural vibration using a single PZT transducer. In: Proceedings of the international society for optical engineering (ed DavisLP), San Diego, CA, 16 June, vol. 3327), San Diego, CA, 16June, Vol. 3327, pp.159–168.
