This paper presents an improved analysis of a two-degree-of-freedom (2DOF) galloping-based piezoelectric energy harvester (GPEH). First, an overview of the 2DOF GPEH, together with some discussions on its physical implementation, are presented. The theoretical model of the 2DOF GPEH is then developed. The analytical solutions are derived using the harmonic balance method. The dynamic behaviour of the 2DOF GPEH is predicted according to the solution characteristics. Moreover, the mode activation mechanism of the 2DOF GPEH is theoretically unveiled: depending on the system parameters; there may exist a single or multiple stable solutions which correspond to different vibration modes of the 2DOF GPEH. Subsequently, an equivalent circuit model of the 2DOF GPEH is established. Circuit simulations are performed to verify the analytical solutions. Case studies through detailed theoretical analysis and circuit simulation give in-depth insights into the dynamic behaviour of the 2DOF GPEH. It is demonstrated that by tuning the stiffness of the auxiliary oscillator, either the first or the second mode vibration of the 2DOF GPEH can be activated, resulting in completely different dynamic behaviours and energy harvesting performance. Finally, from the perspectives of reducing the cut-in wind speed and improving the voltage output, several design guidelines are provided.
AbdelkefiA (2016) Aeroelastic energy harvesting: A review. International Journal of Engineering Science100: 112–135.
2.
AbdelkefiAHajjMRNayfehAH (2012) Power harvesting from transverse galloping of square cylinder. Nonlinear Dynamics70(2): 1355–1363.
3.
AbdelmoulaHAbdelkefiA (2016) The potential of electrical impedance on the performance of galloping systems for energy harvesting and control applications. Journal of Sound and Vibration370: 191–208.
4.
AlhadidiAHAbderrahmaneHDaqaqMF (2016) Exploiting stiffness nonlinearities to improve flow energy capture from the wake of a bluff body. Physica D: Nonlinear Phenomena337: 30–42.
5.
AliMArafaMElarabyM (2013) Harvesting energy from galloping oscillations. In: Proceedings of the World Congress on Engineering, London, UK, 3–5 July. London, UK: WCE.
6.
Barrero-GilAAlonsoGSanz-AndresA (2010) Energy harvesting from transverse galloping. Journal of Sound and Vibration329(14): 2873–2883.
7.
BiboAAlhadidiAHDaqaqMF (2015) Exploiting a nonlinear restoring force to improve the performance of flow energy harvesters. Journal of Applied Physics117(4): 045103.
8.
BlevinsRIwanW (1974) The galloping response of a two-degree-of-freedom system. Journal of Applied Mechanics41(4): 1113–1118.
9.
BryantMGarciaE (2011) Modeling and testing of a novel aeroelastic flutter energy harvester. Journal of Vibration and Acoustics133(1): 011010.
10.
DesaiYShahAPopplewellN (1990) Galloping analysis for two-degree-of-freedom oscillator. Journal of Engineering Mechanics116(12): 2583–2602.
11.
ErturkAInmanDJ (2008) On mechanical modeling of cantilevered piezoelectric vibration energy harvesters. Journal of Intelligent Material Systems and Structures19(11): 1311–1325.
12.
EugeniMElahiHFuneF, et al. (2020) Numerical and experimental investigation of piezoelectric energy harvester based on flag-flutter. Aerospace Science and Technology97: 105634.
13.
EwereFWangGCainB (2014) Experimental investigation of galloping piezoelectric energy harvesters with square bluff bodies. Smart Materials and Structures23(10): 104012.
14.
FangSFuXDuX, et al. (2019) A music-box-like extended rotational plucking energy harvester with multiple piezoelectric cantilevers. Applied Physics Letters114(23): 233902.
15.
HuGTangLLiangJ, et al. (2019) Modelling of a cantilevered energy harvester with partial piezoelectric coverage and shunted to practical interface circuits. Journal of Intelligent Material Systems and Structures30(13), 1045389X19849269.
16.
HuGTangLYangY (2020) A Lumped Parameter Approach for Analysing a Metamaterial Beam Based Piezoelectric Energy Harvester around Fundamental Resonance. In: ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS), Irvine, CA, USA, 15 September (Virtual Conference). Irvine, CA: American Society of Mechanical Engineers Digital Collection.
17.
HuGWangJQiaoH, et al. (2021a). An experimental study of a two-degree-of-freedom galloping energy harvester. International Journal of Energy Research45(2): 3365–3374.
18.
HuGWangJTangL (2021b) A comb-like beam based piezoelectric system for galloping energy harvesting. Mechanical Systems and Signal Processing150: 107301.
19.
HuGWangJSuZ, et al. (2019) Performance evaluation of twin piezoelectric wind energy harvesters under mutual interference. Applied Physics Letters115(7): 073901.
20.
HuGZhaoBTangL, et al. (2018) Modeling of Cantilevered Piezoelectric Energy Harvester with Standard DC Interface Circuit. In: International Conference on Noise and Vibration Engineering, Leuven, Belgium, 17–19 September. Leuven, Belgium.
21.
JavedUAbdelkefiAAkhtarI (2016) An improved stability characterization for aeroelastic energy harvesting applications. Communications in Nonlinear Science and Numerical Simulation36: 252–265.
22.
JoS-HYoonHShinYC, et al. (2020) An analytical model of a phononic crystal with a piezoelectric defect for energy harvesting using an electroelastically coupled transfer matrix. International Journal of Mechanical Sciences193: 106160.
23.
LanCTangLHuG, et al. (2019) Dynamics and performance of a two degree-of-freedom galloping-based piezoelectric energy harvester. Smart Materials and Structures28(4): 045018.
24.
LiuF-RZhangW-MZhaoL-C, et al. (2020) Performance enhancement of wind energy harvester utilizing wake flow induced by double upstream flat-plates. Applied Energy257: 114034.
25.
LuongoADi FabioF (1993) Multimodal galloping of dense spectra structures. Journal of Wind Engineering and Industrial Aerodynamics48(2–3): 163–174.
26.
NaseerRDaiHAbdelkefiA, et al. (2017) Piezomagnetoelastic energy harvesting from vortex-induced vibrations using monostable characteristics. Applied Energy203: 142–153.
27.
PriyaSInmanDJ (2009) Energy Harvesting Technologies, vol. 21. New York, NY: Springer.
28.
RudowskiJ (1982) Limit cycles in self-excited multi-degree-of-freedom systems. Journal of Sound and Vibration81(1): 33–49.
29.
SirohiJMahadikR (2011) Piezoelectric wind energy harvester for low-power sensors. Journal of Intelligent Material Systems and Structures22(18): 2215–2228.
30.
SirohiJMahadikR (2012) Harvesting wind energy using a galloping piezoelectric beam. Journal of Vibration and Acoustics134(1): 011009.
31.
StaggsJFerlemannDShenoiS (2017) Wind farm security: Attack surface, targets, scenarios and mitigation. International Journal of Critical Infrastructure Protection17: 3–14.
32.
TangLYangYSohCK (2013) Broadband vibration energy harvesting techniques. In: ElvinNErturkA (eds.) Advances in Energy Harvesting Methods. New York, NY: Springer New York, pp.17–61.
33.
TangLZhaoLYangY, et al. (2014) Equivalent circuit representation and analysis of galloping-based wind energy harvesting. IEEE/ASME Transactions on Mechatronics20(2): 834–844.
34.
TangLYangY (2012) A multiple-degree-of-freedom piezoelectric energy harvesting model. Journal of Intelligent Material Systems and Structures23(14): 1631–1647.
35.
WangJGengLDingL, et al. (2020a) The state-of-the-art review on energy harvesting from flow-induced vibrations. Applied Energy267: 114902.
36.
WangJTangLZhaoL, et al. (2020b) Equivalent circuit representation of a vortex-induced vibration-based energy harvester using a semi-empirical lumped parameter approach. International Journal of Energy Research44(6): 4516–4528.
37.
WangJHuGSuZ, et al. (2019a) A cross-coupled dual-beam for multi-directional energy harvesting from vortex induced vibrations. Smart Materials and Structures28(12): 12LT02.
38.
WangJTangLZhaoL, et al. (2019b) Efficiency investigation on energy harvesting from airflows in HVAC system based on galloping of isosceles triangle sectioned bluff bodies. Energy172: 1066–1078.
39.
WangJZhouSZhangZ, et al. (2019c) High-performance piezoelectric wind energy harvester with Y-shaped attachments. Energy Conversion and Management181: 645–652.
40.
YanZWangLHajjMR, et al. (2020) Energy harvesting from iced-conductor inspired wake galloping. Extreme Mechanics Letters35: 100633.
41.
YangKWangJYurchenkoD (2019) A double-beam piezo-magneto-elastic wind energy harvester for improving the galloping-based energy harvesting. Applied Physics Letters115(19): 193901.
42.
YangYTangL (2009) Equivalent circuit modeling of piezoelectric energy harvesters. Journal of Intelligent Material Systems and Structures20(18): 2223–2235.
43.
YangYZhaoLTangL (2013) Comparative study of tip cross-sections for efficient galloping energy harvesting. Applied Physics Letters102(6): 064105.
44.
YuB (2016) Nonlinear Dynamics of Cable Galloping Via a Two-Degree-of-Freedom Nonlinear Oscillator. PhD dissertation. Southern Illinois University at CarbondaleCarbondale, Illinois, USA.
45.
ZhangMHuGWangJ (2020) Bluff body with built-in piezoelectric cantilever for flow-induced energy harvesting. International Journal of Energy Research44(5): 3762–3777.
46.
ZhaoLYangY (2018) An impact-based broadband aeroelastic energy harvester for concurrent wind and base vibration energy harvesting. Applied Energy212: 233–243.
