Active flexible composites can be developed through the coupling of silicone matrices and smart materials such as NiTi shape memory alloys (SMA). This work evaluates the mechanical behavior and adhesion of NiTi SMA ribbons embedded in a silicone matrix for the development of active flexible composites. Ribbons with cross-section of 0.15 × 0.8 mm2 were cold-rolled from superelastic NiTi wires with 0.4 mm in diameter. These ribbons were heat treated to either obtain characteristics of superelasticity (SE) or shape memory effect (SME) at room temperature. Silicone, NiTi wire, and ribbons were characterized by Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), and tensile tests. Adhesion between SMA ribbons and silicone matrix was evaluated with pull-out tests. The use of an adhesion promoter proved to be indispensable to ensure a good pull-out strength and shear stress at the NiTi ribbon and silicone interface. A silicone rubber cylinder with an embedded SME ribbon was built to evaluate the functionality of the NiTi ribbon in the development of flexible structures, which was demonstrated by the resistive heating and deformation of the SMA/silicone rubber composite.
ChuWSLeeKTSongSH, et al. (2012) Review of biomimetic underwater robots using smart actuators. International Journal of Precision Engineering and Manufacturing13(7): 1281–1292.
4.
De AraújoCJRodriguesLFACoutinho NetoJF, et al. (2008) Fabrication and static characterization of carbon-fiber-reinforced polymers with embedded NiTi shape memory wire actuators. Smart Materials and Structures17(6): 065004.
5.
DuerigTWBhattacharyaK (2015) The influence of the R-phase on the superelastic behavior of NiTi. Shape Memory and Superelasticity1(2): 153–161.
6.
FathiHShokriehMMSaeediA (2019) A theoretical and experimental investigation on the stress distribution in the interface of pre-strained SMA wire / polymer composites. Composites Part B: Engineering175: 107100.
7.
FirstovGSVitchevRGKumarH, et al. (2002) Surface oxidation of NiTi shape memory alloy. Biomaterials23(24): 4863–4871.
8.
GrassiENDde OliveiraHMRde AraujoCJ, et al. (2015) Effect of heat treatments on the thermomechanical behaviour of Ni-Ti superelastic mini coil springs. In: MATEC web of conferences - ESOMAT 2015 – 10th European symposium on martensitic transformations, 2015, EDP Sciences, p.03004.
9.
HornýLVeselýJChlupH, et al. (2012) Single fiber pull-out test of nitinol-silicon-textile composite. Bulletin of Appiled Mechanics8(32): 77–80.
10.
JonnalagaddaKKlineGESottosNR (1997) Local displacements and load transfer of shape memory alloys in polymeric matrices. Experimental Mechanics37(1): 78–86.
LauKChanAWShiS, et al. (2002) Debond induced by strain recovery of an embedded NiTi wire at a NiTi r epoxy interface: micro-scale observation. Materials & Design23(3): 265–270.
13.
LesterBTBaxevanisTChemiskyY, et al. (2015) Review and perspectives: shape memory alloy composite. Acta Mechanica226(12): 3907–3960.
14.
MartinezRVFishCRChenX, et al. (2012) Elastomeric origami: programmable paper-elastomer composites as pneumatic actuators. Advanced Functional Materials22(7): 1376–1384.
15.
MiyazakiSOtsukaK (1986) Deformation and transition behavior associated with the R-phase in Ti-Ni alloys. Metallurgical Transaction A17(1): 53–63.
16.
OtsukaKShimizuK (1986) Pseudoelasticity and shape memory effects in alloys. International Metals Reviews31(1): 93–114.
17.
PayandehYMeraghniFPatoorE, et al. (2010) Debonding initiation in a NiTi shape memory wire–epoxy matrix composite. Influence of martensitic transformation. Materials and Design31(3): 1077–1084.
18.
PoonCKLauKTZhouLM (2005) Design of pull-out stresses for prestrained SMA wire/polymer hybrid composites. Composites Part B: Engineering36(1): 25–31.
19.
PoonCKZhouLYamL (2004) Size effect on the optimum actuation condition for SMA-composites. Composite Structures 66(1–4): 503–511.
20.
ReyT (2014) Contribution to the elaboration, experimentation and modeling of architectured shape memory alloy Nickel- Titanium/silicone rubber composites. Université de Grenoble. Available at: https://hal.archives-ouvertes.fr/tel-02023224/document
21.
ReyTRazanFRobinE, et al. (2014) Mechanical characterization and comparison of different NiTi/silicone rubber interfaces. International Journal of Adhesion and Adhesives48: 67–74.
22.
RodrigueHWeiWBhandariB, et al. (2015) Fabrication of wrist-like SMA-based actuator by double smart soft composite casting. Smart Materials and Structures24(12): 125003.
SadrnezhaadSKNematiNHBagheriR (2009) Improved adhesion of NiTi wire to silicone matrix for smart composite medical applications. Materials and Design30(9): 3667–3672.
25.
SaeediAShokriehMM (2017) Effect of shape memory alloy wires on the enhancement of fracture behavior of epoxy polymer. Polymer Testing64(October): 221–228.
26.
SheYLiCClearyJ, et al. (2015) Design and fabrication of a soft robotic hand with embedded actuators and sensors. Journal of Mechanisms and Robotics7(2): 021007.
27.
ShepherdRFIlievskiFChoiW, et al. (2011) Multigait soft robot. Proceedings of the National Academy of Sciences of the United States of America108(51): 20400–20403.
28.
ShuYCBhattacharyaK (1998) The influence of texture on the shape-memory effect in polycrystals. Acta Materialia46(15): 5457–5473.
29.
StricherAMRinaldiRGBarrèsC, et al. (2015) How I met your elastomers: from network topology to mechanical behaviours of conventional silicone materials. RSC Advances5(66): 53713–53725.
30.
SunLHuangWMDingZ, et al. (2012) Stimulus-responsive shape memory materials: a review. Materials and Design33: 577–640.
31.
TanNGuXRenH (2018) Design, characterization and applications of a novel soft actuator driven by flexible shafts. Mechanism and Machine Theory Journal122: 197–218.
32.
WangGLiMZhouJ (2019) Modeling soft machines driven by buckling actuators. International Journal of Mechanical Sciences158(April): 662–667.
33.
WangWRodrigueHLeeJ-Y, et al. (2015) Smart phone robot made of smart soft composite (SSC). Composites Research28(2): 52–57.
