Investigation of functional characteristics of a synergistically configured parallel-type shape memory alloy variable stiffness actuator

Abstract

Variable stiffness actuator is the essential element for force control and motion generation of most mechanical systems that are used for soft robotic, biomimetic and biomedical applications. Mechanical systems when integrated with smart materials enable controlled variation of stiffness in addition to control of force and displacement, thus exhibiting superior characteristics. Active compliant/variable stiffness actuator using shape memory alloy allows simple and compact design, exhibits comparable actuator efficiency and offers directional controllable actuation, self-sensing and a wide range of variable stiffness. The functional characteristics of a synergistically operated translational/linear compliant variable stiffness actuator, configured synergistically with shape memory alloy wire(s) and passive compression spring, are determined experimentally under no load without control to offer translational actuation. Repetitive actuation is made possible through electrical activation (direct Joule heating) of shape memory alloy wire(s) and the aiding force (the restoring (bias) force) of the passive spring. Actuation with variable stiffness is obtained from the inherent stiffness variation of shape memory alloy during its phase transformation, along with the fixed stiffness of the passive compliant element. The scope of improving the range of stiffness through varied forms and connections of the elements is recognized, while retaining the basic structure without compromising its simplicity.

Keywords

Variable stiffness linear/translational actuation compliant motion synergistic configuration shape memory alloy functional characteristics

Get full access to this article

View all access options for this article.

References

Grant

Hayward

(1997) Variable structure control of shape memory alloy actuators. IEEE Control Systems 17(3): 80–88.

Guo

Pan

Wee

et al . (2015) Design and control of a novel compliant differential shape memory alloy actuator. Sensors and Actuators A: Physical 225: 71–80.

Hamiti

Voda-Besancon

Roux-Buisson

(1996) Position control of a pneumatic actuator under the influence of stiction. Control Engineering Practice 4(8): 1079–1088.

Heredia

Ollero

Bejar

et al . (2008) Sensor and actuator fault detection in small autonomous helicopters. Mechatronics 18(2): 90–99.

Howard

Braun

Vijayakumar

(2011) Constraint-based equilibrium and stiffness control of variable stiffness actuators. In: Proceedings of the IEEE international conference on robotics and automation (ICRA), Shanghai, China, 9–13 May, pp. 5554–5560. New York: IEEE.

Ikuta

Tsukamoto

Hirose

(1988) Shape memory alloy servo actuator system with electric resistance feedback and application for active endoscope. In: Proceedings of the IEEE international conference on robotics and automation, Philadelphia, PA, 24–29 April, pp. 427–430. New York: IEEE.

Khidir

Mohamed

Mohd Nor

et al . (2007) A new concept of linear smart actuator. Sensors and Actuators A: Physical 135: 244–249.

Manfredi

Velsink

Khan

et al . (2016) A variable impedance actuator based on shape memory alloy. In: Proceedings of the actuator conference, Bremen, 13 June, pp. 1–4. Bremen: Messe Bremen-HVG Hanseatische Veranstaltungs GmbH.

Morishima

(2017) Variable stiffness actuator. Patent application 15/658684, USA.

10.

Nalini

Dhanalakshmi

(2019) Synergistically configured shape memory alloy for variable stiffness translational actuation. Journal of Intelligent Material Systems Structures 30(6): 844–854.

11.

Rodríguez

Chacón

Donoso

et al . (2011) Design of an adjustable-stiffness spring: mathematical modeling and simulation, fabrication and experimental validation. Mechanism and Machine Theory 46(12): 1970–1979.

12.

Tonietti

Schiavi

Bicchi

(2005) Design and control of a variable stiffness actuator for safe and fast physical human/robot interaction. In: Proceedings of the IEEE international conference on robotics and automation, Barcelona, 18–22 April, pp. 526–531. New York: IEEE.

13.

Tsagarakis

Sardellitti

Caldwell

(2011) A new variable stiffness actuator (CompAct-VSA): design and modelling. In: Proceedings of the IEEE international conference on intelligent robots and systems (IROS), San Francisco, CA, 25–30 September, pp. 378–383. New York: IEEE.

14.

Wolf

Hirzinger

(2008) A new variable stiffness design: matching requirements of the next robot generation. In: Proceedings of the IEEE international conference on robotics and automation, Pasadena, CA, 19–23 May, pp. 1741–1746. New York: IEEE.

15.

Zhang

Yin

Zhu

(2013) Sigmoid-based hysteresis modeling and high-speed tracking control of SMA-artificial muscle. Sensors and Actuators A: Physical 201: 264–273.