Effects of atomic oxygen on epoxy-based shape memory polymer in low earth orbit

Abstract

Atomic oxygen is a dominant component of the low earth orbit and can erode most spacecraft polymeric material. In this article, the atomic oxygen erosion resistance tests of an epoxy-based shape memory polymer are carried out in a ground-based atomic oxygen simulator with a vacuum space chamber. The samples, before and after the atomic oxygen exposure, are compared in appearance, surface morphology, mass, main component, dynamical and static mechanical properties, and shape memory properties. The atomic oxygen exposure causes oxidization reaction of the material, which leads to surface roughen and mass loss, while the shape memory polymer main components remain same. The results of dynamical and static mechanical tests indicate that the atomic oxygen exposure has little effect on the storage modulus and glassy transition temperature (Tg), whereas the elongation, elastic modulus, tensile strength, and yield strength decrease since the atomic oxygen exposure gives rise to tiny cracks. The shape memory property has rarely changed since the atomic oxygen erosion is mainly located near the surface of the sample.

Keywords

Atomic oxygen exposure shape memory polymer low earth orbit properties

Get full access to this article

View all access options for this article.

References

Banks

Miller

De Groh

(2004) Low earth orbital atomic oxygen interactions with materials. AIAA-2004-5638. Available at: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20040087142.pdf

Bungay

Tiwald

Devries

et al . (2001) Spectroscopic Ellipsometry Characterization of Polymers Modified by Atomic Oxygen and Ultraviolet Radiation. Protection of Space Materials from the Space Environment. Dordrecht: Springer, pp. 51–72.

Dever

Miller

Messer

et al . (2002) Exposure of polymer film thermal control materials on the materials international space station experiment (MISSE). AIAA-2001-4924. Available at: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20020038542.pdf

Fang

(2006) Mechanical Technology Development on a 35 m Deployable Radar Antenna for Monitoring Hurricanes. Pasadena, CA: Jet Propulsion Laboratory, National Aeronautics and Space Administration.

Gall

Dunn

Liu

et al . (2002) Shape memory polymer nanocomposites. Acta Materialia 50(20): 5115–5126.

Hooshangi

Feghhi

SAH

Saeedzadeh

(2016) The effects of low earth orbit atomic oxygen on the properties of Polytetrafluoroethylene. Acta Astronautica 119: 233–240.

Ishizawa

Hiroyuki

Minami

et al . (2005) New actuator using shape-memory polymer for space use. In: Proceedings of the 56th international astronautical congress, Fukuoka, Japan, 17–21 October.

Ishizawa

Imagawa

Yoshikawa

et al . (2001) Research on applicability of shape memory polymers (SMP) to inflatable and deployable space structures. In: Proceedings of the Japan international SAMPE symposium, Tokyo, Japan, 13–16 November, pp. 295–298.

Lan

Liu

et al . (2009) Fiber reinforced shape-memory polymer composite and its application in a deployable hinge. Smart Materials and Structures 18(2): 024002.

10.

Leng

Liu

et al . (2007) Electroactivate shape-memory polymer filled with nanocarbon particles and short carbon fibers. Applied Physics Letters 91(14): 144105.

11.

Leng

Liu

(2009) Effect of a linear monomer on the thermomechanical properties of epoxy shape-memory polymer. Smart Materials and Structures 18: 095031.

12.

Lin

JKH

Knoll

Willey

(2006) Shape memory rigidizable inflatable (RI) structures for large space systems applications. In: Proceedings of the structures, structural dynamics, and materials conference, Newport, RI, 1–4 May.

13.

Wang

et al . (2015) Effects of atomic oxygen exposure on the tribological performance of ZrO₂-reinforced polyimide nanocomposites for low earth orbit space applications. Composites Part B: Engineering 77: 215–222.

14.

Minton

Wright

Tomczak

et al . (2012) Atomic oxygen effects on POSS polyimides in low earth orbit. ACS Applied Materials & Interfaces 4(2): 492–502.

15.

Ohki

Ohsako

et al . (2004) Mechanical and shape memory behavior of composites with shape memory polymer. Composites Part A: Applied Science and Manufacturing 35(9): 1065–1073.

16.

Silverman

(1995) Space environmental effects on spacecraft: LEO materials selection guide. NASA CR-4661. Available at: https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19960000861.pdf

17.

Srinivasan

Banks

(1990) Materials Degradation in Low Earth Orbit (LEO). Warrendale, PA: The Minerals, Metals and Materials Society.

18.

Tao

Wang

et al . (2012) Phenylphosphine oxide-containing aromatic polyamide films with high atomic oxygen erosion resistance. Polymer Degradation and Stability 97(6): 981–986.

19.

Wei

Sandstroröm

Miyazaki

(1998) Shape-memory materials and hybrid composites for smart systems. Part I: shape-memory materials. Journal of Materials Science 33(15): 3743–3762.

20.

Xiao

Wang

Zhan

(2012) Atomic oxygen resistant phosphorus-containing polyimides for LEO environment. Journal of Materials Science 47(12): 4904–4913.

21.

Zhao

Ding

Wang

et al . (2015) Ultraviolet or atomic oxygen effects on tribological properties of the carbon fibers/polyimide composites. Journal of Macromolecular Science, Part B 54(5): 593–604.