To assess the performance of a piezoelectric vibration energy harvester (PVEH) for analysis and design, a well-defined efficiency measure of mechanical-to-electrical energy conversion is desired. Depending on the purpose of use, this work newly derives two efficiency measures of energy conversion, one of which is defined as the ratio of electrical output power to mechanical input power of a PVEH with an optimal impedance–matched load resistor and the other of which is defined as the ratio of electrical output power of a PVEH with an optimal impedance–matched load resistor to mechanical input power of the same PVEH under the short-circuit condition. The proposed efficiency measures are extensively verified by finite element analysis results for four resonance-tuned PVEHs with different piezoelectric materials. New findings on the characteristics of energy conversion and conversion efficiency are also provided for two different impedance matching methods.
Cook-ChennaultKAThambiNSastryAM (2008) Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with emphasis on piezoelectric energy harvesting systems. Smart Materials and Structures17(4): 043001.
2.
duToitNEWardleBL (2007) Experimental verification of models for microfabricated piezoelectric vibration energy harvester. AIAA Journal45(5): 1126–1137.
3.
El-hamiMGlynne-JonesPWhilteNM. (2001) Design and fabrication of a new vibration-based electromagnetic power generator. Sensors and Actuators A: Physical92(1–3): 335–342.
4.
ErturkAInmanDJ (2008a) A distributed parameter electromechanical model for cantilevered piezoelectric energy harvsters. Journal of Vibration and Acoustics: ASME130(4): 041002.
5.
ErturkAInmanDJ (2008b) Issues in mathematical modeling of piezoelectric energy harvesters. Smart Materials and Structures17(6): 065016.
6.
ErturkAInmanDJ (2011) Piezoelectric Energy Harvesting. Chichester: John Wiley & Sons, Ltd.
7.
GilbertJMBalouchiF (2008) Comparison of energy harvesting systems for wireless sensor networks. International Journal of Automation and Computing5(4): 334–347.
8.
GoldfarbMJonesLD (1999) On the efficiency of electric power generation with piezoelectric ceramic. Journal of Dynamic Systems, Measurement, and Control: ASME121(3): 566–571.
9.
HarneRL (2012) Theoretical investigation of energy harvesting efficiency from structural vibrations using piezoelectric and electromagnetic oscillators. Journal of Acoustical Society of America132(1): 162–172.
10.
IkedaT (1996) Fundamentals of Piezoelectricity. New York: Oxford University Press.
11.
KimJE (2010) Analysis of vibration-powered piezoelectric energy harvesters by using equivalent circuit models. Transactions of the Korean Society for Noise and Vibration Engineering20(4): 397–404.
12.
KimJE (2014) Dedicated algorithm and software for the integrated analysis of AC and DC electrical outputs of piezoelectric vibration energy harvesters. Journal of Mechanical Science and Technology28(10): 4027–4036.
13.
KimJE (2015) On the energy conversion efficiency of piezoelectric vibration energy harvesting devices. Transactions of the Korean Society of Mechanical Engineers A39(5): 499–505.
14.
KimJEKimYY (2011) Analysis of piezoelectric energy harvesters of a moderate aspect ratio with a distributed tip mass. Journal of Vibration and Acoustics: ASME133(4): 041010.
15.
KimJEKimYY (2013) Power enhancing by reversing mode sequence in tuned mass-spring unit attached vibration energy harvester. AIP Advances3(7): 072103.
16.
KimJEKimHYoonH. (2015) An energy conversion model for cantilevered piezoelectric vibration energy harvesters using only measurable parameters. International Journal of Precision and Engineering and Manufacturing-Green Technology2(1): 51–57.
17.
KimJEKimY-CSunKH (2014) Performance characteristics of vibration energy harvesting using [001] and [011]-poled PMN-PZT single-crystals. Transactions of the Korean Society for Noise and Vibration Engineering24(11): 890–897.
18.
LiaoYSodanoHA (2008) Model of a single mode energy harvester and properties for optimal power generation. Smart Materials and Structures17(6): 065026.
19.
LuFLeePHLimSP (2004) Modeling and analysis of micro piezoelectric power generations for micro-electromechanical-systems applications. Smart Materials and Structures13(1): 57–63.
20.
MeningerSMur-MirandaJOAmirtharajahR. (2001) Vibration-to-electric energy conversion. IEEE Transactions on VLSI Systems9(1): 64–76.
21.
MitchesonPDGreenTCYeatsmanEM. (2004) Architectures for vibration-driven micropower generators. Journal of Microelectromechanical Systems13(3): 429–440.
22.
PatelRMcWilliamSPopovAA (2011) A geometric parameter study of piezoelectric coverage on a rectangular cantilever energy harvester. Smart Materials and Structures20(8): 085004.
RichardsCDAndersonMJBahrDF. (2004) Efficiency of energy conversion for devices containing a piezoelectric component. Journal of Micromechanics and Microengineering14(5): 717–721.
25.
RoundyS (2005) On the effectiveness of vibration-based energy harvesting. Journal of Intelligent Material Systems and Structures16(10): 809–823.
26.
RoundySWrightPK (2004) A piezoelectric vibration based generator for wireless electronics. Smart Materials and Structures13(5): 1131–1142.
27.
RoundySWrightPKRabaeyJ (2003) A study of low level vibration as a power sources for wireless sensor nodes. Computer Communications26(11): 1131–1144.
28.
ShuYCLienIC (2006) Efficiency of energy conversion for a piezoelectric power harvesting system. Journal of Micromechanics and Microengineering16(11): 2429–2438.
29.
SodanoHInmanDJParkG (2005) Comparison of piezoelectric energy harvesting devices for recharging batteries. Journal of Intelligent Material Systems and Structures16(10): 799–807.
30.
StephenNG (2006) On energy harvesting from ambient vibration. Journal of Sound and Vibration293(1–2): 409–425.
31.
UmedaMNakamuraKUehaS (1997) Energy storage characteristics of a piezo-generator using impact induced vibration. Japanese Journal of Applied Physics36(5B): 3146–3151.
