Phenomenological modeling on thermo-mechanical response of shape memory alloy strip is presented in this article. Thermal response and transformation-accompanied deformation are described by the proposed model. The transformation expansion tensor is proposed to describe the relationship between the transformation-induced deformation of the strip and the temperature. Based on the fixed-point iterative method, the model is then implemented into ABAQUS using the user-defined subroutine. Finally, the proposed model is verified by the comparison between the finite element simulation and experiment on the thermo-mechanical responses of a shape memory alloy strip.
BoydJGLagoudasDC (1996) A thermodynamical constitutive model for shape memory materials. Part I. The monolithic shape memory alloy. International Journal of Plasticity12: 805–842.
2.
BrinsonLCLammeringR (1993) Finite element analysis of the behavior of shape memory alloys and their applications. International Journal of Solids and Structures30: 3261–3280.
3.
ChenZ (2014) The study of the two-dimension shape memory alloy’s active deformation. BE Thesis, Nanjing University of Aeronautics and Astronautics, Nanjing, China.
4.
CherkaouiMSunQPSongGQ (2000) Micromechanics modeling of composite with ductile matrix and shape memory alloy reinforcement. International Journal of Solids and Structures37: 1577–1594.
5.
De BlonkBJLagoudasDC (1998) Actuation of elastomeric rods with embedded two-way shape memory alloy actuators. Smart Materials and Structures7: 771–783.
6.
GallKSehitogluH (1999) The role of texture in tension–compression asymmetry in polycrystalline NiTi. International Journal of Plasticity15: 69–92.
7.
GaoXHuangMBrinsonLC (2000) A multivariant micromechanical model for SMAs Part 1. Crystallographic issues for single crystal model. International Journal of Plasticity16: 1345–1369.
8.
HartlDJLagoudasDCCalkinsFTet al. (2010) Use of a Ni60Ti shape memory alloy for active jet engine chevron application: I. Thermomechanical characterization. Smart Materials and Structures19: 427–437.
9.
HartlDJMooneyJTLagoudasDCet al. (2009) Use of a Ni60Ti shape memory alloy for active jet engine chevron application: II. Experimentally validated numerical analysis. Smart Materials and Structures19: 427–437.
10.
HeY (2009) Non-local modeling on macroscopic domain patterns in phase transformation of NiTi tubes. Acta Mechanica Solida Sinica22: 407–417.
11.
HebdaDAWhiteSR (1998) Effect of training conditions and extended thermal cycling on nitinol two-way shape memory behavior. Smart Materials and Structures4: 298–304.
12.
HuangMBrinsonLC (1998) A multivariant model for single crystal shape memory alloy behavior. Journal of the Mechanics and Physics of Solids46: 1379–1409.
13.
HuangMGaoXBrinsonLC (2000) A multivariant micromechanical model for SMAs Part 2. Polycrystal model. International Journal of Plasticity16: 1371–1390.
14.
KainumaRMatsumotoMHonmaT (1986) The mechanism of the all-round shape memory effect in a Ni-rich TiNi alloy. In: Proceedings of the international conference on martensitic transformation, Nara, Japan, 26–30 August, pp. 717–722. Sendai: The Japan Institute of Metals Publishing.
15.
LagoudasDC (2008) Shape Memory Alloys: Modeling and Engineering Applications. New York: Springer.
16.
LeoDJ (2007) Engineering Analysis of Smart Material Systems. New York: John Wiley & Sons.
17.
LexcellentCLeclercqSGabryBet al. (2000) The two way shape memory effect of shape memory alloys: an experimental study and a phenomenological model. International Journal of Plasticity16: 1155–1168.
18.
LiangCRogersCA (1990) One-dimensional thermomechanical constitutive relations for shape memory materials. Journal of Intelligent Material Systems and Structures1: 207–234.
19.
MabeJH (2006) Boeing’s variable geometry chevron: morphing aerostructure for jet noise reduction. International Society for Optical Engineering2142: 199–210.
20.
MorinCMoumniZZakiW (2011) A constitutive model for shape memory alloys accounting for thermomechanical coupling. International Journal of Plasticity27: 748–767.
21.
QidwaiMALagoudasDC (2000) On thermomechanics and transformation surfaces of polycrystalline NiTi shape memory alloy material. International Journal of Plasticity16: 1309–1343.
22.
SedlakPFrostMBenesovaBet al. (2012) Thermomechanical model for NiTi-based shape memory alloys including R-phase and material anisotropy under multi-axial loadings. International Journal of Plasticity39: 132–151.
23.
SeeleckeSMüllerI (2004) Shape memory alloy actuators in smart structures: modeling and simulation. Applied Mechanics Reviews57: 23–46.
24.
ShawJAKyriakidesS (1995) Thermomechanical aspects of NiTi. Journal of the Mechanics and Physics of Solids43: 1243–1281.
25.
SolomouAGMachairasTTSaravanosDA (2014) A coupled thermomechanical beam finite element for the simulation of shape memory alloy actuators. Journal of Intelligent Material Systems and Structures25: 890–907.
26.
ThamburajaP (2005) Constitutive equations for martensitic reorientation and detwinning in shape-memory alloys. Journal of the Mechanics and Physics of Solids53: 825–856.
27.
ThamburajaPPanHChauFS (2005) Martensitic reorientation and shape-memory effect in initially textured polycrystalline Ti–Ni sheet. Acta Materialia53: 3821–3831.
28.
Toshiyuki TakagiYLSuzukiSMatsumotoMet al. (2001) Modeling and numerical simulation on thermomechanical behavior of SMA plates with two-way shape memory effect. Journal of Intelligent Material Systems and Structures12: 721–728.
29.
ZhaoPQiuJJiHet al. (2012) Modeling and numerical analysis of a three-dimensional shape memory alloy shell structure. In: Proceedings of the third international conference on smart materials and nanotechnology in engineering (ed LengJBar-CohenYLeeIet al), Shenzhen, China, 5–8 December 2011, pp. 840914-1–840914-10. Washington: SPIE Publishing.
30.
ZhouBYoonSHLengJS (2009) A three-dimensional constitutive model for shape memory alloy. Smart Materials and Structures18: 7566–7579.
