Delamination detection is challenging but vital to ensuring the safety of an increasing number of structures utilizing laminated composites. Laminated composites manufactured with nanocomposite matrices show incredible potential for enhanced material properties including electrical conductivity which can be leveraged for conductivity-based damage identification. Advances in nanotechnology also enable the development of materials engineered at micro-scales for specific macro-scale applications. This research capitalizes on that approach by exploring how micro-scale manipulation of nanofillers can bolster structural-scale damage identification. An equivalent resistor network model is developed to predict nanocomposite conductivity as a function of filler alignment. Next, electrical impedance tomography is employed to locate delamination damage. It is found that aligning nanofillers at an angle through the thickness of a plate markedly enhances sensitivity to delamination damage. This demonstrates that powerful insights can be gleaned from the micro-scale tailoring approach to material design to radically enhance structural-scale damage identification.
AbascalJArridgeSRAtkinsonD. (2008) Use of anisotropic modeling in electrical impedance tomography: description of method and preliminary assessment of utility in imaging brain function in the adult human head. NeuroImage43: 258–268.
2.
AbascalJLionheartWRBArridgeSR. (2011) Electrical impedance tomography in anisotropic media with known eigenvectors. Inverse Problems27: 065004.
3.
AdlerALionheartWRB (2006) Uses and abuses of EIDORS: an extensible software base for EIT. Physiological Measurement27: S25.
4.
BaoWSMeguidSAZhuZH. (2011) Modeling electrical conductivities of nanocomposites with aligned carbon nanotubes. Nanotechnology22: 485704.
5.
BaoWSMeguidSAZhuZH. (2012) A novel approach to predict the electrical conductivity of multifunctional nanocomposites. Mechanics of Materials46: 129–138.
6.
BauhoferWKovacsJZ (2009) A review and analysis of electrical percolation in carbon nanotube polymer composites. Composites Science and Technology69: 1486–1498.
7.
ChakrabortyD (2007) Delamination of laminated fiber reinforced plastic composites under multiple cylindrical impact. Materials & Design28: 1142–1153.
8.
DominguesDLogakisESkordosAA (2012) The use of an electric field in the preparation of glass fibre/epoxy composites containing carbon nanotubes. Carbon50: 2493–2503.
9.
DuFFischerJEWineyKI (2005) Effect of nanotube alignment on percolation conductivity in carbon nanotube/polymer composites. Physical Review B72: 121404.
10.
FlorentDDendievelRLaurentC. (2006) Carbon nanotube-filled polymer composites. Numerical simulation of electrical conductivity in three-dimensional entangled fibrous networks. Acta Materialia54: 2923–2931.
11.
GojnyFHWichmannMHGKöpkeU. (2004) Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content. Composites Science and Technology64: 2363–2371.
12.
GrossiordNLoosJLaakeL. (2008) High-conductivity polymer nanocomposites obtained by tailoring the characteristics of carbon nanotubes. Advanced Functional Materials18: 3226–3234.
13.
GungorS (2013) Electric-field-induced alignment of carbon nanofillers in multifunctional glass-epoxy composites. PhD Thesis, The Pennsylvania State University, University Park, PA.
14.
GungorSBakisCE (2014) Anisotropic networking of carbon black in glass/epoxy composites using electric field. Journal of Composite Materials. Epub ahead of print 4 February. DOI: 10.1177/0021998314521256.
15.
HolderDS (ed.) (2005) Electrical Impedance Tomography: Methods, History and Applications. Bristol: Institute of Physics.
HouTCLynchJP (2009) Electrical impedance tomographic methods for sensing strain fields and crack damage in cementitious structures. Journal of Intelligent Material Systems and Structures20: 1363–1379.
18.
HouTCLohKJLynchJP (2007) Spatial conductivity mapping of carbon nanotube composite thin films by electrical impedance tomography for sensing applications. Nanotechnology18: 315501.
19.
HuNKarubeYAraiM. (2010) Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor. Carbon48: 680–687.
20.
HuNKarubeYYanC. (2008a) Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor. Acta Materialia56: 2929–2936.
21.
HuNMasudaZYamamotoG. (2008b) Effect of fabrication process on electrical properties of polymer/multi-wall carbon nanotube nanocomposites. Composites Part A: Applied Science and Manufacturing39: 893–903.
LiuAWangKWBakisCE (2010) Multiscale damping model for polymeric composites containing carbon nanotube ropes. Journal of Composite Materials44: 2301–2323.
24.
LiuAWangKWBakisCE (2011) Effect of functionalization of single-wall carbon nanotubes (SWNTs) on the damping characteristics of SWNT-based epoxy composites via multiscale analysis. Composites Part A: Applied Science and Manufacturing42: 1748–1755.
25.
LohKJHouTCLynchJP. (2009) Carbon nanotube sensing skins for spatial strain and impact damage identification. Journal of Nondestructive Evaluation28: 9–25.
26.
LoyolaBRBriggsTMArroncheL. (2013) Detection of spatially distributed damage in fiber-reinforced polymer composites. Structural Health Monitoring12: 225–239.
27.
NaghashpourAHoaSV (2013) A technique for real-time detection, location and quantification of damage in large polymer composite structures made of electrically non-conductive fibers and carbon nanotube networks. Nanotechnology24: 455502.
28.
OnoUAokiTOgasawaraT (2006) Mechanical and electrical properties of carbon nanotube based composites. In: Proceedings of the 48th conference on structures strength, Kobe, Japan, pp. 141–143.
29.
Research Report (2004) Nano Carbon Technologies Co., Ltd, 66-2, Horikawamachi, Saiwai-ku, Kawasaki shi, and Kanazawa.
30.
SandlerJShafferMSPPrasseT. (1999) Development of a dispersion process for carbon nanotubes in an epoxy matrix and the resulting electrical properties. Polymer40: 5967–5971.
31.
SharmaABakisCEWangKW (2008) A new method of chaining carbon nanofibers in epoxy. Nanotechnology19: 325606.
32.
SimmonsJG (1963) Generalized formula for the electric tunnel effect between similar electrodes separated by a thin insulating film. Journal of Applied Physics34: 1793.
33.
TallmanTNWangKW (2013) An arbitrary strains carbon nanotube composite piezoresistivity model for finite element integration. Applied Physics Letters102: 011909.
34.
TallmanTNWangKW (2015) The influence of nanofiller alignment on transverse percolation and conductivity. Nanotechnology26: 025501.
35.
TallmanTNGungorSWangKW. (2014) Damage detection and conductivity evolution in carbon nanofiber epoxy via electrical impedance tomography. Smart Materials and Structures23: 045034.
36.
TallmanTNGungorSWangKW. (2015) Damage detection via electrical impedance tomography in glass fiber/epoxy laminates with carbon black filler. Structural Health Monitoring14: 100–109.
37.
ThostensonETChouTW (2002) Aligned multi-wall carbon nanotube-reinforced composites: processing and mechanical characterization. Journal of Physics D: Applied Physics35: 77–80.
38.
VietsCKaysserSSchulteK (2013) Damage mapping of GFRP via electrical resistance measurements using nanocomposite epoxy matrix systems. Composites Part B: Engineering65: 80–88.
39.
ZhangDYeLWangD. (2012) Assessment of transverse impact damage in GF/EP laminates of conductive nanoparticles using electrical resistive tomography. Composites Part A: Applied Science and Manufacturing43: 1587–1598.
40.
ZhouXShinEWangKW. (2004) Interfacial damping characteristics of carbon nanotube-based composites. Composites Science and Technology64: 2425–2437.
41.
ZhuYBakisCEAdairJH (2004) Effects of carbon nanofiller functionalization and distribution on laminar fracture toughness of multi-scale reinforced polymer composites. Carbon50: 1316–1331.
