Experimental characterization and modelling validation of shape memory alloy Negator springs

Abstract

This article is aimed at the experimental characterization and modelling validation of shape memory alloy Negator springs. A Negator spring is a spiral spring made of strip of metal wound on the flat with an inherent curvature such that, in repose, each coil wraps tightly on its inner neighbour. The main feature of a Negator springs is the nearly constant force–displacement behaviour in the unwinding of the strip, mounted on a rotating drum. Moreover, the stroke is very long, theoretically infinite as it depends only on the length of the initial strip. A Negator spring made of shape memory alloy is built and experimentally tested to demonstrate the feasibility of this actuator. The shape memory Negator spring behaviour is predicted both with an analytical model and with a finite element software. In both cases, the material is modelled as elastic in austenitic range while an exponential continuum law is used to describe the martensitic behaviour. The experimental results confirm the applicability of this kind of geometry to the shape memory alloy actuators, and the analytical model is confirmed to be a powerful design tool to dimension and predict the spring behaviour both in martensitic and austenitic ranges, as well as the finite element model developed.

Keywords

Shape memory actuators experimental testing Negator

Get full access to this article

View all access options for this article.

References

Abaqus Corp. (2012) Abaqus/CAE plug-in utility to calibrate Nitinol material behavior. pp. 1–5. Available at: http://www.3ds.com/products-services/simulia/

Auricchio

Petrini

(2002) Improvements and algorithmical considerations on a recent three-dimensional model describing stress-induced solid phase transformations. International Journal for Numerical Methods in Engineering 55: 1255–1284.

Boyd

Lagoudas

(1996) A thermodynamical constitutive model for shape memory materials. Part I. The monolithic shape memory alloy. International Journal of Plasticity 12: 805–842.

Brinson

(1993) One-dimensional constitutive behavior of shape memory alloys: thermomechanical derivation with non-constant material functions and redefined martensite internal variable. Journal of Intelligent Material Systems and Structures 4: 229–242.

Dia

Bujoreanu

Stanciu

. (2008) Study of the shape memory effect in lamellar helical springs made from Cu–Zn–Al shape memory alloy. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 481–482: 697–701.

Feodosyev

(1983) Selected Problems and Questions in Strength of Materials. Moscow: Mir Publishers.

Funakubo

(1987) Shape Memory Alloys: Precision Machinery and Robotics, vol. 1. CRC Press Funakubo, translated from the Japanese by Kennedy

J.B.

Gordon and Breach Science Publishers, New York.

Jenuwine

Midha

(1994) Synthesis of single-input and multiple-output port mechanisms with springs for specified energy absorption. Journal of Mechanical Design 116: 937–943.

Leclercq

Lexcellent

(1996) A general macroscopic description of the thermomechanical behavior of shape memory alloys. Journal of the Mechanics and Physics of Solids 44: 953–980.

10.

Liang

Rogers

(1990) One-dimensional thermomechanical constitutive relations for shape memory materials. Journal of Intelligent Material Systems and Structures 1: 207–234.

11.

Nespoli

Besseghini

Pittaccio

. (2010) The high potential of shape memory alloys in developing miniature mechanical devices: a review on shape memory alloy mini-actuators. Sensors and Actuators A: Physical 158: 149–160.

12.

Otsuka

Wayman

(1998) Shape Memory Materials. Cambridge: Cambridge University Press.

13.

Scirè Mammano

Dragoni

(2011a) Increasing stroke and output force of linear shape memory actuators by elastic compensation. Mechatronics 21: 570–580.

14.

Scirè Mammano

Dragoni

(2011b) Modeling of wire-on-drum shape memory actuators for linear and rotary motion. Journal of Intelligent Material Systems and Structures 22: 1129–1140.

15.

Scirè Mammano

Dragoni

(2012) Functional fatigue of Ni–Ti shape memory wires under various loading conditions. International Journal of Fatigue. Epub ahead of print 21 March. DOI: 10.1016/j.ijfatigue.2012.03.004.

16.

Spaggiari

Dragoni

(2011) Multiphysics modeling and design of shape memory alloy wave springs as linear actuators. Journal of Mechanical Design 133: 061008 (8 pp.).

17.

Spaggiari

Dragoni

(2012) Analytical and numerical modelling of shape memory alloy Negator springs for long-stroke constant-force actuators. In: Proceedings of ASME-SMASIS conference, Stone Mountain, Georgia, USA, September 19–21, 2012, ISBN: 978-0-7918-4509-7. vol. 1, pp. 353–361.

18.

Spaggiari

Dragoni

(2013) Analytical and numerical modeling of shape memory alloy Negator springs for constant-force, long-stroke actuators. Journal of Intelligent Material Systems and Structures. Epub ahead of print 3 July. DOI: 10.1177/1045389X13493354.

19.

Spaggiari

Mammano

Dragoni

(2012a) Optimum mechanical design of binary actuators based on shape memory alloys. In: Berselli

Vertechy

Vassura

(eds) Smart Actuation and Sensing Systems – Recent Advances and Future Challenges. Rijeka: InTech, pp. 3–34.

20.

Spaggiari

Spinella

Dragoni

(2012b) Design equations for binary shape memory actuators under arbitrary external forces. Journal of Intelligent Material Systems and Structures 24: 682–694.

21.

Tanaka

Nagaki

(1982) A thermomechanical description of materials with internal variables in the process of phase transitions. Ingenieur-Archiv 51: 287–299.

22.

Technosprings Italia (2013) WWW document. Available at: http://www.technosprings.com/en/index.html

23.

Votta

Lansdale

(1952) The theory and design of long deflection constant force spring elements. Transactions of the ASME 74: 439–450.

24.

Vulcan Springs (2013).

25.

Wahl

(1944) Mechanical Springs. Cleveland, OH: Penton. Available at: http://www.vulcanspring.com/conforce-constant-force-springs

26.

Weems

(1999) Constant force spring actuator. International Patent WO1999061792, USA.

27.

Zanotti

Giuliani

Arnaboldi

. (2011) Analysis of wire position and operating conditions on functioning of NiTi wires for shape memory actuators. Journal of Materials Engineering and Performance 20: 688–696.

28.

Zanotti

Giuliani

Riva

. (2009a) Thermal diffusivity of Ni–Ti SMAs. Journal of Alloys and Compounds 473: 231–237.

29.

Zanotti

Giuliani

Tuissi

. (2009b) Response of NiTi SMA wire electrically heated. In: ESOMAT 2009 − 8th European symposium on martensitic transformations, Prague, 7–11 September, p. 06037. Paris: EDP Sciences.