A novel ducted turbine, referred to as a Wind Tower, as a smart architectural integrated design for capturing wind power in residential or commercial applications is theoretically and experimentally studied. A mathematical model is developed to predict the flow behavior inside the tower, and a velocity coefficient is defined to correct the results at different test conditions. A 1/8-scale wind tower prototype, including a four-quadrant-peak windcatcher rooftop, a tower, a nozzle, and a turbine, is designed and fabricated. The results from the mathematical model provide a good estimation of the output power obtained from experimental tests. Significant changes in the output wind speed due to pressure differences created by the surrounding environment and the Wind Tower components configuration are observed. The advantages of requiring low maintenance, and being reliable and sustainable, together with its special design that eliminates bird/bat mortality, make the Wind Tower a promising solution for residential, commercial, and off-grid applications.
AllaeiD (2012) Using CFD to predict the performance of innovative wind power generators. In: Proceedings of the COMSOL conference, Boston, MA, 3–4 October 2012.
3.
A’zamiA (2005) Baadgir in traditional Iranian architecture. In: Proceedings of the international conference on passive and low energy cooling for the built environment, Santorini, 19–21 May 2005 (Retrieved 21March2012). Available at: http://www.inive.org/members_area/medias/pdf/inive/palenc/2005/azami2.pdf
4.
BahariHTadayonS (2011) Wind turbine with diffusers for the buildings or structures. Patent US20110316279 A1, USA.
DanneckerRKWGrantAD (2002) Investigations of a building-integrated ducted wind turbine module. Wind Energy5(1): 53–77.
7.
DwinnellJH (1949) Principles of Aerodynamics. New York: McGraw-Hill.
8.
El-ShorbagyAM (2010) Design with nature: Windcatcher as a paradigm of natural ventilation device in buildings. IJCEE-IJENS: International Journal of Civil & Environmental Engineering10(3): 21–26.
9.
FooteTAgarwalR (2011) Power generation from wind turbines in a solar chimney. In: Proceedings of the ASME 2011 5th international conference on energy sustainability, Washington, DC, 7–10 August 2011.
GoudarziN (2011) Aerodynamic & electromagnetic modeling & analysis of a variable torque generator for wind turbine applications. Master Thesis, University of Maryland, Baltimore County, Baltimore, MD.
12.
GoudarziNZhuWD (2012) Aerodynamic and electromagnetic analysis of a variable electromotive-force generator for a wind turbine. In: Proceedings of the ASME 2012 international mechanical engineering congress and exposition, Houston, TX, 9–15 November 2012, pp. 1215–1228. ASME. Available at : http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1750783
13.
GoudarziNZhuWD (2013a) A review on the development of wind turbine generators across the world. International Journal of Dynamics and Control1(2): 192–202. Available at: http://link.springer.com/article/10.1007/s40435-013-0016-y (accessed 30 October 2013).
14.
GoudarziNZhuWD (2013b) Offshore and onshore wind energy conversion: the potential of a novel multiple-generator drivetrain. Key Engineering Materials (Damage Assessment of Materials): 644–651. Available at: http://www.ttp.net/978-3-03785-796-0.html (accessed 30 October 2013).
15.
GrantAJohnstoneCKellyN (2008) Urban wind energy conversion: the potential of ducted turbines. Renewable Energy33(6): 1157–1163.
16.
HoxeyRPRobertsonAPRichardsonGM. (1997) Correction of wind tunnel pressure coefficients for Reynolds number effect. Journal of Wind Engineering and Industrial Aerodynamics69–71: 547–555.
17.
KaltschmittMStreicherWWieseA (2007) Renewable Energy: Technology, Economics and Environment. New York: Springer.
LaroseGLD’AuteuilA (2006) On the Reynolds number sensitivity of the aerodynamics of bluff bodies with sharp edges. Journal of Wind Engineering and Industrial Aerodynamics94(5): 365–376.
20.
LubitzWD (2014) Impact of ambient turbulence on performance of a small wind turbine. Renewable Energy61: 69–73.
21.
ManeshiMMRezaei-BazkiaeiAWebberAS. (2012) A numerical investigation of impact of architectural and climatic parameters of windcatcher systems on induced ventilation. In: Proceedings of the ASME 2012 international mechanical engineering congress and exposition, Houston, TX, 9–15 November 2012, pp. 1103–1117. New York: ASME.
22.
ManwellJFMcGowanJGRogersAL (2009) Wind Energy Explained: Theory, Design, and Application. 2nd ed.Chichester: John Wiley & Sons, Inc.
23.
MashudMAliMH (2011) High-performance wind turbine: a new approach. In: Proceedings of the ASME 2011 5th international conference on energy sustainability, Washington, DC, 7–10 August 2011.
24.
MoomawWBurgherrPHeathG. (2012) Renewable energy sources and climate change mitigation. Report of International Panel on Climate Change (IPCC). Cambridge University Press. Available at: http://srren.ipcc-wg3.de/report (accessed 30 October 2013).
25.
MunsonBROkiishiTHYongDF (2009) Fundamentals of Fluid Mechanics. New Jersey: Wiley.
26.
OhyaYKarasudaniT (2010) A shrouded wind turbine generating high output power with wind-lens technology. Energies3(4): 643–649.
WangJPiechnaJMullerN (2012) Computational fluid dynamics investigation of a novel multi-blade wind turbine in a duct. Journal of Solar Energy Engineering: Transactions of the ASME135(1): 011008.
ZhuWDGoudarziNWangXF. (2012) Development of a variable electromotive-force generator for a wind turbine. In: Proceedings of the ASME 2012 international mechanical engineering congress & exposition, Houston, TX, 9–15 November 2012, pp. 1249–1256. New York: ASME.
