Optimal design of control valves in magnetorheological fluid dampers using a nondimensional analytical method

Abstract

The magnetorheological control valve is a key element in magnetorheological dampers to achieve controllable damping characteristics in practice. The optimal design of magnetorheological control valves with an annular flow structure in two configurations of coil wire placements is investigated using a nondimensional analytical method. The achievable performances of the magnetorheological control valve are formulated in terms of several important nondimensional design parameters, which are defined based on the analytical models considering both mechanical flow characteristics and magnetic flux conservation in magnetorheological fluids and valve materials with a clear understanding and convenient specification in optimization. The design method first identifies a few optimal internal parameters through maximizing a single-objective function with predefined constraints. This can avoid empirical difficulty or uncertainty in weight selection in conventional multiobjective optimization methods and guarantee the worst-case performance. Then, the inherent sensitivity of the achievable performance with respect to external parameters is analyzed to provide practical instructions for appropriate design of the magnetorheological control valve. Finally, the analytical optimal results are verified by a finite element analysis, and a comparison is conducted to illustrate the excellent performance of a vibration isolation system employing the optimally designed magnetorheological control valve.

Keywords

Magnetorheological fluid dampers control valve optimal design analytical analysis

Get full access to this article

View all access options for this article.

References

Carlson

(2008) Magnetorheological fluids. In: Schwartz

(ed.) Smart Materials (Chapter 17), Boca Raton, FL. Taylor & Francis Group, LLC.

Choi

Wereley

(2005) Mitigation of biodynamic response to vibratory and blast-induced shock loads using magnetorheological seat suspension. Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering 219(6): 741–753.

Gavin

Hoagg

Dobossy

(2001) Optimal design of MR dampers. In: Proceedings of U.S.-Japan workshop on smart structures for improved seismic performance in urban regions (ed Kawashima

Spencer

Suzuki

), Seattle, WA, 14 August, pp. 225–236.

Goncalves

Koo

Ahmadian

(2006) A review of the state of the art in magnetorheological fluid technologies—Part I: MR fluid and MR fluid models. The Shock and Vibration Digest 38(3): 203–219.

Grunwald

Olabi

(2008) Design of magneto-rheological (MR) valve. Sensors and Actuators A: Physical 148(1): 211–223.

Hayt

Buck

(2006) Engineering Electromagnetic. 7th ed. Singapore: McGraw-Hill Higher Education.

Hiemenz

Wereley

(2008) Semi-active magnetorheological helicopter crew seat suspension for vibration isolation. Journal of Aircraft 45(3): 945–954.

Hietanen

(2002) ER fluids and MR materials—basic properties and some application developments. In: Smart materials and structures VTT research program 2000–2002 Symposium (ed Vessonen

), Espoo, Finland, 4 December, pp. 33–50. Retrieved from http://www.vtt.fi/inf/pdf/symposiums/2003/S225.pdf

Hong

Wang

. (2006) Liquid spring shock absorber with controllable magnetorheological damping. Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering 220(8): 1019–1029.

10.

Hong

Wereley

Choi

. (2008) Analytical and experimental validation of a nondimensional Bingham model for mixed-mode magnetorheological dampers. Journal of Sound and Vibration 312(3): 399–417.

11.

Jung

Spencer

. (2004) State-of-the-art of semiactive control systems using MR fluid dampers in civil engineering applications. Structural Engineering and Mechanics 17(3–4): 493–526.

12.

Guo

(2003) Finite element analysis and simulation evaluation of a magnetorheological valve. International Journal of Advanced Manufacturing Technology 21(6): 438–445.

13.

Mao

Choi

Wereley

(2005) Effective design strategy for a magnetorheological damper using a nonlinear flow model. In: Smart structures and materials 2005: damping and isolation, Proceedings of SPIE 5760 (ed Wang

), Bellingham, WA, 16 May, pp. 446–455.

14.

Moon

Huh

Jung

. (2011) Sub-optimal design procedure of valve-mode magnetorheological fluid dampers for structural control. KSCE Journal of Civil Engineering 15(5): 867–873.

15.

Muhammad

Yao

Deng

(2006) Review of magnetorheological (MR) fluids and its application in vibration control. Journal of Marine Science and Application 5(3): 17–29.

16.

Nam

Park

(2009) Electromagnetic design of a magnetorheological damper. Journal of Intelligent Material Systems and Structures 20(2): 181–191.

17.

Nguyen

Choi

(2009a) Optimal design of a vehicle magnetorheological damper considering the damping force and dynamic range (015013). Smart Materials and Structures 18(1): 10 pp.

18.

Nguyen

Choi

(2009b) Optimal design of MR shock absorber and application to vehicle suspension (035012). Smart Materials and Structures 18(3): 11 pp.

19.

Nguyen

Choi

Kim

(2009a) Geometric optimal design of MR damper considering damping force, control energy and time constant. Journal of Physics Conference Series 149(1): 012076.

20.

Nguyen

Choi

Wereley

(2008) Optimal design of magnetorheological valves via a finite element method considering control energy and a time constant (025024). Smart Materials and Structures 17(2): 12 pp.

21.

Nguyen

Choi

Lee

. (2009b) An analytical method for optimal design of MR valve structures (095032). Smart Materials and Structures 18(9): 12 pp.

22.

Nguyen

Han

Choi

. (2007) Geometry optimization of MR valves constrained in a specific volume using the finite element. Smart Materials and Structures 16(6): 2242–2252.

23.

Sung

Choi

(2008) Effect of an electromagnetically optimized magnetorheological damper on vehicle suspension control performance. Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering 222(12): 2307–2319.

24.

Vicente

Klingenberg

Hidalgo-Alvarez

(2011) Magnetorheological fluids: a review. Soft Matter 7: 3701–3710.

25.

Wang

Liao

(2009) A magnetorheological valve with both annular and radial fluid flow resistance gaps (115001). Smart Materials and Structures 18(11): 16 pp.

26.

Wang

Bai

(2011) Pareto optimization-based tradeoff between the damping force and the sensed relative displacement of a self-sensing magnetorheological damper. Journal of Intelligent Material Systems and Structures 22: 1451–1467.

27.

Yang

Spencer

Jung

. (2004) Dynamic modeling of large-scale magnetorheological damper systems for civil engineering applications. Journal of Engineering Mechanics: ASCE 130(9): 1107–1114.

28.

Yang

Duan

Eriksson

(2008) Analysis of optimal design strategy of a magnetorheological smart structure (015047). Smart Materials and Structures 17(1): 8 pp.

29.

Zhu

Jing

Cheng

(2011) A magnetorheological fluid embedded pneumatic vibration isolator allowing independently adjustable stiffness and damping (085025). Smart Materials and Structures 20(8): 18 pp.

30.

Zhu

Jing

Cheng

(2012) Systematic design of a magneto-rheological fluid embedded pneumatic vibration isolator subject to practical constraints (035006). Smart Materials and Structures 21(3): 15 pp.