Design of thin-film polyvinylidene fluoride sensor rosettes for isolation of various strain components

Abstract

Thin-film polyvinylidene fluoride piezoelectric sensors have long been recognized as a promising alternative to traditional metal foil strain gauges in applications where only dynamic or quasistatic signals are of interest. Compared to metal foil strain gauges, polyvinylidene fluoride sensors feature high sensitivity, high dynamic range, and broad frequency bandwidth. However, transverse sensitivity of the polyvinylidene fluoride sensor is higher than that of a metal foil strain gauge, making it more difficult to isolate a particular strain component or a deformation mode when the host structure is under complex loading. In addition, polyvinylidene fluoride films are sensitive to changes in ambient temperature due to the pyroelectric effect. In this article, three temperature-compensated polyvinylidene fluoride sensor rosette designs are proposed for isolating specific strain component(s) and deformation mode(s) of interest. First-principles based models are derived to relate the polyvinylidene fluoride sensor rosette output to the actual elastic strain component of interest. Experimental validation is conducted to verify the proposed models and to compare the performance of the polyvinylidene fluoride sensor rosettes with their metal foil strain gauge counterparts.

Keywords

PVDF piezoelectric strain gauge sensor rosette

Get full access to this article

View all access options for this article.

References

Campbell

Vanderheiden

Martinez

. (1992) A multi-purpose sensor for composite laminates based on a piezoelectric film. Journal of Composite Materials 26(3): 334–349.

Doebelin

(1990) Measurement Systems: Application and Design. New York: McGraw-Hill.

Zhao

Wang

. (2005) A wireless smart PVDF sensor for structural health monitoring. Structural Control and Health Monitoring 12(3): 329–343.

Karki

(2000) Signal conditioning piezoelectric sensors. Available at: http://focus.ti.com/lit/an/sloa033a/sloa033a.pdf (accessed 15 March 2011).

Melkote

Morehouse

. (2010) On-line monitoring of end milling forces using a thin film based wireless sensor module. In: Proceedings of the ASME international manufacturing science and engineering conference, Erie, PA, 12–15 October 2010.

Matsumoto

Biwa

Katsumi

. (2004) Surface strain sensing with polymer piezoelectric film. NDT&E International 37(1): 57–64.

MEAS (2009) SDT shielded piezo sensors. Available at: http://www.meas-spec.com/downloads/SDT_Series.pdf (accessed 15 March 2011).

Nye

(1979) Physical Properties of Crystals: Their Representation by Tensors and Matrices. Oxford: Clarendon Press.

Payo

Haleb

(2010) Dynamic characterization of piezoelectric paint sensors under biaxial strain. Sensors and Actuators A: Physical 163(1): 150–158.

10.

Potma

(1967) Strain Gauges: Theory and Application. N.V. Philips’ Gloeilampenfabrieken, Eindhoven, The Netherlands, 1967.

11.

Samuel

Pines

(1997) Health monitoring and damage detection of a rotorcraft planetary geartrain system using piezoelectric sensors. In: Proceedings of SPIE, San Diego, CA, 3 March 1997, vol. 3041, pp.44–53.

12.

Sirohi

Chopra

(2000) Fundamental understanding of piezoelectric strain sensors. Journal of Intelligent Material Systems and Structures 11(4): 246–257.

13.

Zhang

Galea

Chiu

. (1993) An investigation of thin PVDF films as fluctuating-strain-measuring and damage-monitoring devices. Smart Materials and Structures 2(4): 208–216.

14.

Zhang

(2006) In situ fatigue crack detection using piezoelectric paint sensor. Journal of Intelligent Material Systems and Structures 17(10): 843–852.