On finding of high piezoresistive response of carbon nanotube films without surfactants for in-plane strain detection

Abstract

The use of carbon nanotubes (CNTs) for construction of sensors is promising. This is due to some unique characteristics of CNTs. In recent years, strain sensors built from CNT composite films have been developed; however, their low piezoresistive sensitivity (gauge factor (GF)) in in-plane strain detection is a concern compared with other strain sensors. This article reports an experimental discovery of the superior piezoresistive response of a CNT film that is free of surfactants, known as the pure CNT film. The mechanism for the high GF with the pure CNT film strain sensors is also discussed.

Keywords

piezoresistive response gauge factor carbon nanotubes surfactant

Get full access to this article

View all access options for this article.

References

Dharap

Nagarajaiah

Barrera

(2004) Flexural strain sensing using carbon nanotube film sensor. Sensor Review 24: 271–273.

Kaempgen

Artukovic

Hecht

Roth

(2005) Transparent and flexible carbon nanotube transistors. Nano Letters 5(4): 757–760.

Lee

(2010) Carbon nanotube film piezoresistors embedded in polymer membrane. Applied Physics Letter 96: 13511–13515.

Lynch

Loh

Shim

Kotov

(2007) Tailoring piezoresistive sensitivity of multilayer carbon nanotube composite strain sensors. Journal of Intelligent Material Systems and Structures 19: 747–749.

Tan

Jiang

Huang

Liu

Hwang

(2007) The effect of van der Waals-based interface cohesive law on carbon nanotube-reinforced composite materials. Composite Science and Technology 67: 2941–2946.