Design,Modeling,and Prototyping of a Simple Semi-Modular Biped Actuated by Shape Memory Alloys

Abstract

In this article, a prototype of a biped robot actuated by SMA springs with minimum degrees of freedom is presented. SMA springs are a class of smart materials that are known for their high energy to weight ratios. It is shown that utilizing spring type SMAs has many advantages as large deformation, smooth and silent motion compared to ordinary type of actuators. A modular concept is applied for the development of the proposed biped robot where the SMA springs are utilized as actuators. A module with proper DOF is developed, that is its position and stiffness is controllable and makes the biped stable with five DOFs. Walking trajectory is generated validating the ZMP criteria and it is shown that this criterion can be simplified to the COG criteria due to slow response nature of the SMAs. To verify the design, a complete model of the biped actuated with SMA is developed through simulation with the help of MATLAB and Visual.Nastaran software. Finally to validate the results, a prototype is manufactured and tested. Experimental results show reasonable agreement with simulation results which resulted in stable walking of the proposed biped.

Keywords

biped robot SMA actuator 5DOFs

Get full access to this article

View all access options for this article.

References

Ashrafiuon

Jala

2009. "Sliding Mode Control of Mechanical Systems Actuated by Shape Memory Alloy," Journal of Dynamic Systems and Measurement Control, 131: 011010–011010. (6 p).

Brinson

1993. "One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermo-Mechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal Variable," Journal of Intelligent Material Systems and Structures, 4: 229–242.

Elahinia, M. 2004. “Effect of System Dynamics on Shape Memory Alloy Behavior and Control,” PhD Thesis, Virginia Polytechnic Institute and State University, Virginia.

Elahinia

Ashrafiuon

2002. "Nonlinear Control of a Shape Memory Alloy Actuated Manipulator," Journal of Vibration and Acoustic, 124: 566–575.

Esfahani

Elahinia

2007. "Stable Walking Pattern for an SMA-Actuated Biped," IEEE/ASME Transaction on Mechatronics, 12: 534–541.

Grant

Hayward

1997. "Variable Structure Control of Shape Memory Alloy Actuators," IEEE Systems and Control Magazine, 17: 80–88.

Hadi

2010a. "Developing a Novel SMA-Actuated Robotic Module," Sensors and Actuators A: Physical, 162: 72–81.

Hadi

2010b. "Position and Force Control of A SMA Spring Based Differential Actuator," Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent SystemsPhiladelphia, Pennsylvania, USA.

Hirai

1997. "Current and Future Perspective of Honda Humanoid Robot," 2

IEEE/RSJ International Conference on Intelligent Robots and Systems

500–508.

10.

Kuroki

2001. "A Small Biped Entertainment Robot," International Symposium on Micromechatronics and Human Science, 3–4.

11.

Liang

Rogers

1990. "One-Dimensional Thermo-Mechanical Constitutive Relations for Shape Memory Materials," Journal of Intelligent Material Systems and Structures, 1: 207–234.

12.

Liang

Rogers

1997. "Design of Shape Memory Alloys Springs with Application in Vibration Control," Journal of Intelligent Material Systems and Structures, 8: 314–322.

13.

Liu

Liao

2004. "A Snake Robot Using Shape Memory Alloys," International Conference of IEEE on Robotics and Biomimetics

Shenyang, China

601–605.

14.

Nishida

2006. "Development and Control of a Micro Biped Walking Robot using Shape Memory Alloys," International Conference of IEEE on Robotics and Automation

Orlando, Florida

1604–1609.

15.

Son

2006. "Design of New Quadruped Robot with SMA Actuators for Dynamic Walking," SICE-ICASE International Joint ConferenceBusan, Korea.

16.

Tabrizi

Moallem

2007. "Nonlinear position Control of Antagonistic Shape Memory Alloy Actuators," Proceeding of the American Control ConferenceNew York, USA.

17.

Tanaka

1986. "Thermo-Mechanical Sketch Of Shape Memory Effect: One-Dimensional Tensile Behavior," Journal of Structural Mechanics and Material Science, 18: 251–263.

18.

Urata

2007. "Design of High D.O.F. Mobile Micro Robot Using Electrical Resistance Control of Shape Memory Alloy," International Conference of IEEE/RSJ on Intelligent Robots and Systems

San Diego, CA, USA

3828–3833.

19.

Vukobratovic

Juricic

1996. "Contribution to the Synthesis of Biped Gait," IEEE Transaction on Bio-Medical Engineering, 16: 1–6.

20.

Ying

2007. "Design and Research of Robot Joint Actuated by SMAWire," Proceedings of the IEEE International Conference on Robotics and BiomimeticsSanya, China.