This study introduces the design and manufacturing of a wingbox based on a cellular hexagonal morphology and produced using kirigami techniques. The wingbox is manufactured in autoclave-cured woven Kevlar fabric using ply-cutting patterns designed around an airfoil profile. The cellular wingbox can be completely or partially folded, providing some shape-adapting capabilities for possible morphing applications. A numerical and analytical evaluation of the torsional stiffness of the wingbox with novel elastomeric face skins is also performed.
Abdulrahim, M., Garcia, H. and Lind, R.2005. ‘‘Flight Characteristics of Shaping the Membrane Wing of Micro Aerial Vehicles,’’ Journal of Aircraft , 41:131-137.
2.
Abramovitch, H., Burgard, M., Edery-Azulay, L., Evans, K., Hoffmeister, M., Miller, W., Scarpa, F., Smith, C. and Tee, K.2010. ‘‘Smart Tetrachiral and Hexachiral Honeycomb: Sensing and Impact Detection,’’Composites Science and Technology, 70:1072-1079. special issue on Chiral Smart Honeycombs.
3.
Anonymous.1993. ‘‘European A300B Airbus General Review,’’Aircraft Engineering and Aerospace Technology43:18-19.
Ashley, S.2003. ‘‘Flying on Flexible Wings,’’Scientific American Magazine, pp. 84-91.
6.
Baker, D. and Friswell, M.I.2008. ‘‘The Design of Morphing Aerofoils using Compliant Mechanisms,’’ In: 19th International Conference on Adaptive Structures and Technologies, 6-9 October, Ascona, Switzerland.
7.
Bettini, P., Airoldi, A., Sala, G., Landro, L.D., Ruzzene, M. and Spadoni, A.2010. ‘‘Composite Chiral Structures for Morphing airfoils: Numerical Analyses and Development of a Manufacturing Process, ’’ Composites Part B: Engineering, 41:133-147.
8.
Bharti, S., Frecker, M., Lesieutre, G. and Browne, J.2007. ‘‘Tendon Actuated Cellular Mechanisms for Morphing Aircraft Wing,’’Proceedings of SPIE, 6523:52307-52307.
9.
Bisplinghoff, R.L., Holt, A. and Halfman, R.L.1983. Aeroelasticity, DoverScience Books , Mineola, New York.
10.
Bornengo, D., Scarpa, F. and Remillat, C.2005. ‘‘Evaluation of hexagonal Chiral Structure for Morphing Aerofoil Concept,’’Proceedings of the IMechE Part G: Journal of Aerospace Engineering, 219:185-191.
11.
Bowman, J., Sandres, B. and Wessharr, T.2002. ‘‘Identification of Military Morphing Aircraft Missions and Morphing Technology Assessment,’’ SPIE, San Diego, CA, Vol. 4698, pp. 121-132.
12.
Daniel, I.M. and Oshai, O.2005. Engineering Mechanics of Composite Materials, Oxford University Press, USA.
13.
Garcia, H., Abdulrahim, M. and Lind, R.2003. ‘‘Roll Control for a Micro Air Vehicle using Active Wing Morphing,’’ AIAA-2003-5347.
14.
Gibson, L.J. and Ashby, M.F.1997. Cellular Solids - Structure and Properties, Cambridge Solid State Science, Cambridge University Press, Cambridge, UK.
15.
Goraj, Z. and Frydrychewicz, A.2004. ‘‘Development Approach of the PW-103. An Increased Reliability Male UAV Under the CAPECON Project within the V FR of EU,’’ In: Proceedings of the 24th International Conference of Aeronautical Sciences, 29 August-3 September, Yokohama , Japan.
16.
Hamer, J.1971. ‘‘Honeycomb structure and its application to the Concorde rudder,’’ Composites, 2:242-245.
17.
Howe, D.2004. Aircraft Loading and Structural Layout, Professional Engineering Publishing, London.
18.
Kudva, J.N.2000. ‘‘Overview of the DARPA Smart Wing Project,’’SPIE, Newport Beach, CA, Vol. 3674.
19.
Martin, J., Heyder-Bruckner, J.J., Remillat, C.D.L., Scarpa, F., Potter, K. and Ruzzene, M.2008. ‘‘The Hexachiral Prismatic Wingbox Concept ,’’ Physica Status Solidi B, 245:570-577.
20.
McCrum, N.G., Buckley, N.P. and Bucknall, C.B.1997. Principles of Polymer Engineering, 2nd edn, Oxford University Press, Oxford.
21.
Mehta, V., Frecker, M. and Lesieutre, G.A.2009. ‘‘Stress Relief in Contact-aided Compliant Cellular Mechanisms,’’Journal of Mechanical Design , 131:091009 (11pp).
22.
Mitsuishi, M., Ueda, K. and Kimura, F. (eds) 2008, ‘‘41th Conference on Manufacturing Systems,’’ In: Proceedings of the 41th CIRP Conference of Manufacturing Systems, 26-28 May, Tokyo, Japan.
23.
Monner, H.P., Sachau, D. and Breitbach, E.1999. Design Aspects of the Elastic Trainling Edge For an Adaptive Wing, Research and Technology Agency, Ottawa, Canada.
24.
Murray, G., Gandhi, F. and Bakis, C.2010. ‘‘Flexible Matrix Composite Skins for One-Dimensional Wing,’’ Journal of Intelligent Materials Systems and Structures, 21:1771-1781.
25.
Nojima, T. and Saito, K.2006. ‘‘Development of Newly Designed Ultra-Light Core Structures,’’ JSME International Journal A, 49:38-42.
26.
Olympio, K.R., Gandhi, F., Asheghian, L. and Kudva, J.2010. ‘‘Design of a Flexible Skin for a Shear Morphing Wing,’’ Journal of Intelligent Materials Systems and Structures, 21:1755-1770.
27.
Pellegrino, S. (ed.) 2002. Deployable Structures, no. 412, CISM International Centre for Mechanical Sciences, Springer, Wien.
28.
Powers, S.G. and Webb, L.D.1997. ‘‘Flight Wing Surface Pressure and Boundary-Layer Data Report from F-111 Smooth Variable Camber Supercritical Mission Adaptive Wing,’’Technical Memorandum4789, NASA Dryden Flight Research Centre.
29.
Prall, D. and Lakes, R.S.1996. ‘‘Properties of a Chiral Honeycomb with a Poisson’s Ratio -1,’’ International Journal of Mechanical Sciences, 39:305-314.
30.
Ramrakhyani, D., Frecker, M. and Lesieutre, G.2009. ‘‘Hinged Beam Elements for the Topology Design of Compliant Mechanisms Using the Ground Structure Approach, ’’ Structural and Multidisciplinary Optimization, 37:557-567.
31.
Scarpa, F., Burriesci, G., Smith, F.C. and Chambers, B.2003. ‘‘Mechanical and electromagnetic behaviour of auxetic honeycomb structures,’’ The Aeronautical Journal, 2774:175-183.
32.
ScienceDaily.2009. Chopper Drop Tests New Technology: Expandable Honeycomb Cushion Could Make Helicopters Safer. Available at: http://www.sciencedaily.com/releases/2009/12/091209185654.htm (accessed on December 12, 2010).
33.
Spadoni, A. and Ruzzene, M.2007. ‘‘Numerical and Experimental Analysis of The Static Compliance of Chiral Truss Core Airfoils,’’ Journal of Mechanics of Materials and Structures, 2:965-981.
34.
Spadoni, A., Ruzzene, M. and Scarpa, F.2006. ‘‘Dynamic Response of Chiral Truss-core Assemblies ,’’ Journal of Intelligent Materials Systems and Structures, 17:941-952.
35.
Stanford, B.K.2008. ‘‘Aeroelastic Analysis and Optimisation of Membrane Micro Air Vehicle Wings,’’ Ph.D. Thesis, University of Florida.
36.
Thill, C., Etches, J., Bond, I.P., Potter, K. and Weaver, P.M.2008. ‘‘Morphing Skins,’’The Aeronautical Journal, 112:117-139.
37.
Thill, C., Etches, J., Bond, I.P., Potter, K. and Weaver, P.M.2010. ‘‘Composite Corrugated Structures for Morphing Wing Skin Applications,’’Smart Materials and Structures, 19:124009 (10pp).
38.
Wang, Y., Li, J. and Zhao, D.1995. ‘‘Mechanical Properties of Fiber Glass and Kevlar Woven Fabric Reinforced Composites,’’ Composites Engineering, 5:1159-1175.
39.
Wlezien, R.W., Homer, G.C., McGowan, A.R., Padula, S.L., Scott, M.A., Silcox, R.J. and Simpson, J.O.1998. ‘‘The Aircraft Morphing Program,’’ AIAA-98-1927 MS493, NASA Langley Research Centre.
40.
Zenkert, D.1997. The Handbook of Sandwich Constructions, Emas Publishing, London.
