The article presents the analytical model of a linear/rotary solid-state actuator formed by a shape memory wire wound over a cylindrical drum. The model assumes a bilinear stress-strain behavior of the wire in the martensitic state (low temperature) and a linear elastic response in the austenitic state (high temperature). Based on simple equilibrium conditions, the model calculates the stress and strain distributions in the wire when subjected to a constant external backup force and undergoing frictional sliding forces at the contact with the drum. Closed-form expressions are supplied for the stroke produced by whatever actuator geometry and are validated numerically against finite element results. For a particular actuator configuration, the analytical forecasts are also checked experimentally on a proof-of-concept prototype. The analytical model shows that large strokes (up to one-half of the drum’s diameter) are achieved if the frictional coefficient is kept below 0.01. Rolling-contact architectures or sonic-pulse excitations of the drum are discussed as technical solutions to obtain such low friction values.
Alacqua, S., Capretti, G., Biasiotto, M. and Zanella, A.2006. ‘‘Actuator with a Wound Shape Memory Element,’’European Patent EP 1830064B1.
2.
Auricchio, F., Coda, A., Reali, A. and Urbano, M.2009. ‘‘SMA Numerical Modeling Versus Experimental Results: Parameter Identification and Model Prediction Capabilities,’’J. Mater. Eng. Perform., 18:649-654.
3.
Butera, F. and Alacqua, S.2002. ‘‘Lock for Doors,’’United States Patent Application US 2002/0139157 A1.
4.
Campanile, L.F., Seack, O., Sachau, D. and Seelecke, S.2002. ‘‘Linearaktuator,’’European Patent EP1073081A3.
Cho, K. and Asada, G.2005. ‘‘Multi-Axis SMA Actuator Array for Driving Anthropomorphic Robot Hand’’, In: ICRA 2005 Proceedings of the IEEE International Conference on Robotics and Automation, 18-22 April, Barcelona, pp. 1356-1361 (DOI: 10.1109/ROBOT.2005.1570304).
7.
Dragoni, E. and Sciré Mammano, G.2009. ‘‘High-Efficiency Shape Memory Actuator’’ , Italian Patent RE2009A000111 (in Italian).
Marlow, R.S.2003. ‘‘A General First-Invariant Hyperelastic Constitutive Model,’’ In: Busfield, J.J.C. and Muhr, A.H. (eds), Proceedings of the Third European Conference on Constitutive Models for Rubber III, 15-17 September, London, UK, Swets & Zeitlinger B.V., Lisse (NL).
10.
Miga Motor Company.2007. Application Notes MigaOne on Board Actuators. Available at: www.migamotors.com (Last accessed 25 May 2011).
11.
Nespoli, A., Besseghini, S., Pittaccio, S., Villa, E. and Viscuso, S.2010. ‘‘The High Potential of Shape Memory Alloys in Developing Miniature Mechanical Devices: A Review on Shape Memory Alloy Mini-Actuators,’’ Sens. Actuators A, 158:149-160.
12.
Pittaccio, S. and Viscuso, S.2010. ‘‘An EMG-Controlled SMA Device for the Rehabilitation of the Ankle Joint in Post-Acute Stroke,’’ In: SMST - The International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA, pp. 40-41.
13.
Pittaccio, S., Viscuso, S., Rossini, M., Magoni, L., Pirovano, S., Villa, E., Besseghini, S. and Molteni, F.2009. ‘‘SHADE: A Shape-Memory-Activated Device Promoting Ankle Dorsiflexion,’’J. Mater. Eng. Perform. , 18:824-830.
14.
Scirè Mammano, G. and Dragoni, E.2011. ‘‘Increasing stroke and output force of linear shape memory actuators by elastic compensation,’’Mechatronics, 21:570-580.
15.
Shibata, M., Yoshimura, T. and Hirai, S.2007. ‘‘Loosely Coupled Joint Driven by SMA Coil Actuators,’’ In: IEEE International Conference on Robotics and Automation, 10-14 April, Rome , pp. 4460-4465 (DOI: 10.1109/ROBOT.2007.364166).
16.
Son, H., Gul, J., Park, S.H., Lee, Y. and Nam, T.2006. ‘‘Design of New Quadruped Robot With SMA Actuators for Dynamic Walking,’’ In: SICE-ICASE International Joint Conference, 18-21 October, Korea, pp. 344-348 (DOI: 10.1109/ SICE.2006.315787).
17.
Spinella, I., Sciré Mammano, G. and Dragoni, E.2009. ‘‘Conceptual Design and Simulation of a Compact Shape Memory Actuator for Rotary Motion,’’J. Mater. Eng. Perform., 18:638-648.
18.
Spinella, I. and Dragoni, E.2010. ‘‘Analysis and Design of Hollow Helical Springs for Shape Memory Actuators,’’J. Intell. Mater. Syst. Struct., 21:185-199.
19.
Spinella, I., Dragoni, E. and Stortiero, F.2010a. ‘‘Modeling, Prototyping, and Testing of Helical Shape Memory Compression Springs with Hollow Cross Section,’’ASME J. Mech. Design, 132:061008 (9 pp).
20.
Spinella, I., Spaggiari, A. and Dragoni, E.2010b. ‘‘Linear Actuator Based on Hollow Shape Memory Springs,’’ In: SMST - The International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, CA, pp. 78-79.
21.
Song, G.2007. ‘‘Design and Control of a Nitinol Wire Actuated Rotary Servo,’’ Smart Mat. Struct., 16:1796-1801.
22.
Storck, H., Littman, W., Wallascheck, J. and Mracek, M.2002. ‘‘The Effect of Friction Reduction in Presence of Ultrasonic Vibrations and its Relevance to Traveling Wave Ultrasonic Motors ,’’ Ultrasonics, 40:379-383.
23.
Vallance, R.R., Walcott, B.L., Lumpp, J.E., Balasubramanian, A. and Rawashdeh, O.A.2009. ‘‘Linear Actuator Using Shape Memory Wire with Controller,’’US Patent US7555900B1.
24.
Warith, M.A., Kennedy, K., Reitsma, R., Reynaerts, D. and Brussel, H.V.1998. ‘‘Design Aspects of Shape Memory Actuators ,’’ Mechatronics, 8:635-656.
25.
Williams, E. and Elahinia, M.2008. ‘‘An Automotive SMA Mirror Actuator: Modeling, Design, and Experimental Evaluation,’’J. Intell. Mater. Syst. Struct., 19:1425-1434.
26.
Yang, K. and Gu, C.L.2002‘‘A novel robot hand with embedded shape memory alloy actuators,’’ Proc. Instn Mech Engrs, Part C, J. Mech. Engng. Science, 216(7): 737-745.
