Dynamic Snap-through for Morphing of Bi-stable Composite Plates

Abstract

Composite laminate plates designed to have two statically stable configurations have been the focus of recent research, with a particular emphasis on morphing applications. In this article, we consider how external vibration energy can be used to assist with the actuation between stable states. This is of interest in the case when surface bonded macro-fiber composites (MFC) actuators are employed as the actuation system. Typically, these type of actuators have been found to require considerably high voltage inputs to achieve significant levels of actuation authority. Therefore, assisting the actuation process will allow lower voltages and/or stiffer plates to be actuated. Two bi-stable plates with different thickness, [0₄ - 90₄]_T and [0₂ - 90₂]_T, are tested. The results show a significant reduction in the force required to change state for the case where dynamic excitation provided by an MFC actuator is used to assist the process. This strategy demonstrates the potential of dynamically assisting actuation as a mechanism for morphing of bi-stable composites.

Keywords

bi-stable composites morphing structures dynamic snap-through macro-fiber composites.

Get full access to this article

View all access options for this article.

References

Arrieta, A.F. , Mattioni, F. , Neild, S.A. , Weaver, P.M. , Wagg, D.J. and Potter, K. 2007. ‘‘Nonlinear Dynamics of a Bi-stable Composite Laminate Plate with Applications to Adaptive Structures,’’ In: 2nd European Conference for Aero-Space Sciences, Brussels.

Arrieta, A.F. , Neild, S.A. and Wagg, D.J. 2009a. ‘‘Nonlinear Dynamic Response and Modelling of a Bi-stable Composite Plate for Applications to Adaptive Structures,’’ Nonlinear Dynamics, 58:259-272.

Arrieta, A.F. , Wagg, D.J. and Neild, S.A. 2009b . ‘‘Modelling of a Bi-stable Composite Plate for Adaptive Structures,’’ In: 50th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference , 4-7 May, Palm Springs, California .

Bowen, C.R. , Butler, R. , Jervis, R. , Kim, H.A. and Salo, A.I.T. 2007. ‘‘Morphing and Shape Control Using Unsymmetrical Composites,’’ Journal of Intelligent Material Systems and Structures, 18:89-98.

Dano, M.-L. and Hyer, M.W. 1998. ‘‘Thermally-induced Deformation Behavior of Unsymmetric Laminates,’’ International Journal of Solids and Structures, 35:2101-2120.

Dano, M.-L. and Hyer, M.W. 2002. ‘‘Snap-through of Unsymmetric Fiber-reinforced Composite Laminates,’’ International Journal of Solids and Structures, 39:175-198.

Dano, M.-L. and Hyer, M.W. 2003. ‘‘Sma-induced Snap-through of Unsymmetric Fiber-reinforced Composite Laminates,’’ International Journal of Solids and Structures, 40:5949-5972.

Diaconu, C.G. , Weaver, P.M. and Mattioni, F. 2008. ‘‘Concepts for Morphing Airfoil Sections Using Bi-stable Laminated Composite Structures,’’ Thin-Walled Structures, 46:689-701.

Emam, S.A. and Nayfeh, A.H. 2004. ‘‘Nonlinear Responses of Buckled Beams to Subharmonic-resonance Excitations,’’ Nonlinear Dynamics, 35:105-122.

10.

Hyer, M.W. 1981. ‘‘Some Observations on the Cured Shapes of Thin Unsymmetric Laminates,’’ Journal of Composite Materials, 15:175-194.

11.

Mattioni, F. , Weaver, P.M. , Potter, K. and Friswell, M.I. 2005. ‘‘Multi-stable Composites Application Concept for Morphing Aircraft,’’ In: Sixteenth International Conference on Adaptive Structures and Technologies, Paris, France.

12.

Nayfeh, A.H. and Mook, D.T. 1979. Nonlinear Oscillations, John Wiley & Sons, New York.

13.

Nayfeh, A.H. 2000. Nonlinear Interactions, Analytical, Computational, and Experimental Methods, John Wiley & Sons, New York.

14.

Portela, P. , Camanho, P. , Weaver, P.M. and Bond, I. 2008. ‘‘Analysis of Morphing, Multi Stable Structures Actuated by Piezoelectric Patches,’’ Computers and Structures, 86:347-356.

15.

Potter, K.D. and Weaver, P.M. 2004. ‘‘A Concept for the Generation of Out-of-plane Distortion from Tailored FRP Laminates,’’ Composites , Part A., 35:1353-1361.

16.

Schultz, M.R. and Hyer, M.W. 2003. ‘‘Snap-through of Unsymmetric Cross-ply Laminates Using Piezoceramic Actuators,’’ Journal of Intelligent Material Systems and Structures, 14:795-814.

17.

Schultz, M.R. , Hyer, M.W. , Williams, R.B. , Wilkie, W.K. and Inman, D.J. 2006. ‘‘Snap-through of Unsymmetric Laminates Using Piezocomposite Actuators,’’ Composite Science and Technology, 66:2442-2448.

18.

Sokorin, S.V. and Terentiev, A.V. 1998. ‘‘On Modal Interaction, Stability and Non-linear Dynamics of a Model Two d.o.f. Mechanical System Performing Snap-through Motion,’’ Nonlinear Dynamics, 16:239-257.

19.

Wilkie, W.K. , Bryant, R.G. , High, J.W. , Fox, R.L. , Hellbaum, R.F. , Jalink Jr, A. , Little, B.D. and Mirick, P.H. 2000. ‘‘Low-cost Piezocomposite Actuator for Structural Control Applications,’’ In: 7th Annual International Symposium on Smart Structures and Materials, 5-9 March, Newport Beach, CA.