Two- and three-dimensional microvascular networks embedded within a polymer fin were fabricated via direct write assembly to demonstrate cooling potential of vascular polymer structures. Thin fin cooling experiments were carried out utilizing water and polyalphaolefin (PAO) oil-based coolant as the working fluids. The surface temperature of the fin was monitored using an infrared camera and flow distribution within the network was evaluated by microscopic particle image velocimetry. The effective heat transfer coefficient was increased 53-fold at low Reynolds number for water cooling in both 2D and 3D geometries. However, 3D architectures offer more uniform flow distribution and the ability to efficiently adapt to blockages and reroute flow within the network. Microvascular materials are excellent candidates for compact, efficient cooling platforms for a variety of applications and 3D architectures offer unique performance enhancements.
Aragon, A.M., Wayer, J.K., Geubelle, P.H., Goldberg, D.E. and White, S.R.2008. ‘‘Design of Microvascular Flow Networks Using Multi-objective Genetic Algorithms,’’ Computer Methods in Applied Mechanics Engineering, 197:4399-4410.
2.
Bejan, A. and Lorente, S.2008. Design with Constructal Theory, Wiley , Hoboken, NJ.
3.
Christensen, K.T., Soloff, S.M. and Adrian, R.J.2000. ‘‘PIV Sleuth: Integrated Particle Image Velocimetry Interrogation/Validation Software,’’ TAM Report 943 , University of Illinois at Urbana-Champaign.
4.
Dang, B.M., Bakir, M.S. and Meindl, J.D.2006. ‘‘Integrated Thermal-Fluidic I/O Interconnects for an On-chip Microchannel Heat Sink,’’ IEEE Electron Device Letters, 27:117-119.
5.
Hansen, C.J., Wu, W., Toohey, K.S., Sottos, N.R., White, S.R. and Lewis, J.A.2009. ‘‘Self-healing materials with interpenetrating microvascular networks,’’Advanced Materials, 21:4143-4147.
6.
Kleemola, J. and Lehtovaara, A.2008. ‘‘An Approach for Determination of Lubricant Properties at Elliptical Elastohydrodynamic Contacts Using a Twin-disc Test Device and a Numerical Traction Model,’’Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 222:797-806.
7.
Lee, J., Lorente, S., Bejan, A. and Kim, M.2009. ‘‘Vascular Structures with Flow Uniformity and Small Resistance,’’International Journal of Heat Mass Transfer, 52:1761-1768.
8.
Lewis, J.A.2006. ‘‘Direct Ink Writing of 3D Functional Materials ,’’ Advanced Functional Materials, 16:2193-2204.
9.
Lyall, M.E., Williams, A.D., Arrit, B.J. and Taft, B.S.2008. ‘‘Experimental Analysis of a Biologically Inspired Thermal-Structural Satellite Panel,’’ In: 49th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conference, 7-10 April, American Institute of Aeronautics and Astronautics Inc., Reston, VA 20191, USA.
10.
Oueslati, R.B., Therriault, D. and Martel, S.2008. ‘‘PCB-integrated Heat Exchanger for Cooling Electronics Using Microchannels Fabricated with the Direct-write Method , ’’ IEEE Transactions on Components and Packaging Technologies , 31:869-874.
11.
Park, J. and Li, X.2006. ‘‘Effect of Flow and Temperature Distribution on the Performance of a PEM Fuel Cell Stack,’’ Journal of Power Sources, 162:444-459.
12.
Paschkewitz, J.S.1998. ‘‘Exposure Testing of Dielectric Liquids for Aircraft EHD Heat Exchanger Applications,’’ In: IEEE: Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), 25-28 October, Atlanta, GA, Annual Report 1, pp. 166-169.
13.
Price, D.C.2003. Thermal Management of Military Fighter Aircraft Electro-optics Pod: An Invited Paper, Institute of Electrical and Electronics Engineers Inc, New York, NY.
14.
Price, D. and Jarratt, M.2002. ‘‘Thermal Conductivity of PTFE and PTFE Composites,’’Thermochimica Acta, 392-393:231-236.
15.
Sabbah, R., Kizilel, R., Selman, J.R. and Al-Hallaj, S.2008. ‘‘Active vs. Passive Thermal Management of High Power Lithium-ion Packs,’’ Journal of Power Sources, 182:630-638.
16.
Santiago, J.G., Wereley, S.T., Meinhart, C.D., Beebe, D.J. and Adrian, R.J.1998. ‘‘A Particle-image Velocimetry System for Microfluidics,’’ Experiments in Fluids, 25:316-319.
17.
Sleiti, A.K.2007. ‘‘Advanced Cooling Technology for Rotors of High-power Low-duty Cycle Generators Using Polyalphaolefins, ’’ Journal of Synthetic Lubrication, 24:77-90.
18.
Therriault, D., Shepherd, R.F., White, S.R. and Lewis, J.A.2005. ‘‘Fugitive Inks for Direct-write Assembly of Three-dimensional Microvascular Networks,’’ Advanced Materials, 17:395-399.
19.
Therriault, D., White, S.R. and Lewis, J.A.2003. ‘‘Chaotic Mixing in Three-dimensional Microvascular Networks Fabricated by Direct-write Assembly, ’’ Nature Materials, 2:265-271.
20.
Toohey, K.S., Sottos, N.R., Lewis, J.A., Moore, J.S. and White, S.R.2007. ‘‘Self-healing Materials with Microvascular Networks,’’ Nature Materials, 6:581-585.
21.
Tuckerman, D.B. and Pease, F.W.1981. ‘‘High-Performance Heat Sinking for VLSI, ’’ IEEE Electron Device Letters, 2:126-129.
22.
Wang, Y., Yuan, G., Yoon, Y.-K., Allen, M.G. and Bidstrup, S.A.2005. ‘‘Active Cooling Substrates for Thermal Management of Microelectronics,’’ IEEE Transactions on Components and Packaging Technologies, 28:477-483.
23.
Wei, X.J., Joshi, Y. and Patterson, M.K.2007. ‘‘Experimental and Numerical Study of a Stacked Microchannel Heat Sink for Liquid Cooling of Microelectronic Devices, ’’ Journal of Heat Transfer-Transactions of the ASME, 129:1432-1444.
24.
Yu, S. and Jung, D.2008. ‘‘Thermal Management Strategy for a Proton Exchange Membrane Fuel Cell System with a Large Active Cell Area, ’’ Renewable Energy, 33:2540-2548.
