Unmanned air vehicles (UAVs) and micro air vehicles (MAVs) constitute unique application platforms for vibration-based energy harvesting. Generating usable electrical energy during their mission has the important practical value of providing an additional energy source to run small electronic components. Electrical energy can be harvested from aeroelastic vibrations of lifting surfaces of UAVs and MAVs as they tend to have relatively flexible wings compared to their larger counterparts. In this work, an electromechanically coupled finite element model is combined with an unsteady aerodynamic model to develop a piezoaeroelastic model for airflow excitation of cantilevered plates representing wing-like structures. The electrical power output and the displacement of the wing tip are investigated for several airflow speeds and two different electrode configurations (continuous and segmented). Cancelation of electrical output occurs for typical coupled bending-torsion aeroelastic modes of a cantilevered generator wing when continuous electrodes are used. Torsional motions of the coupled modes become relatively significant when segmented electrodes are used, improving the broadband performance and altering the flutter speed. Although the focus is placed on the electrical power that can be harvested for a given airflow speed, shunt damping effect of piezoelectric power generation is also investigated for both electrode configurations.
Agneni, A., Del Sorbo, M., Mastroddi, F. and Polli, G.M.2006. ‘‘Multi-modal Damping by Shunted Piezo-patches: Possible Aeroelastic Applications,’’ International Journal of Applied Electromagnetics and Mechanics, 24:1-24.
2.
Agneni, A., Mastroddi, F. and Polli, G.M.2003. ‘‘Shunted Piezoelectric Patches in Elastic and Aeroelastic Vibrations,’’ Computers and Structures , 81:91-105.
3.
Anton, S.R. and Inman, D.J.2008. ‘‘Vibration Energy Harvesting for Unmanned Air Vehicles,’’Smart Structures and Materials 2008: Active and Passive Smart Structures and Integrated Systems II; Proc. SPIE 6928, San Diego.
4.
Anton, S.R. and Sodano, H.A.2007. ‘‘A Review of Power Harvesting Using Piezoelectric Materials 2003-2006,’’ Smart Materials and Structures , 16:R1-R21.
5.
Beeby, S.P., Tudor, M.J. and White, N.M.2006. ‘‘Energy Harvesting Vibration Sources for Microsystems Applications,’’ Measurement Science and Technology, 13:R175-R195.
6.
Benini, G.R., Belo, E.M. and Marques, F.D.2004. ‘‘Numerical Model for the Simulation of Fixed Wings Aeroelastic Response,’’ Journal of the Brazilian Society of Mechanical Sciences & Engineering, 26:129-136.
7.
Bilgen, O., Kochersberger, K., Diggs, E., Kurdila, A. and Inman, D.J.2007. ‘‘Morphing Wing Micro-air-vehicles via Macro-fiber-composite Actuators,’’ In: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii.
8.
Brown, E.L.2003. ‘‘Integrated Strain Actuation in Aircraft with Highly Flexible Composite Wings,’’ PhD Dissertation, Department of Mechanical Engineering (MIT).
9.
Cesnik, C.E.S. and Ortega-Morales, M.2001. ‘‘Active Aeroelastic Tailoring of Slender Flexible Wings,’’ In: International Forum on Aeroelasticity and Structural Dynamics, Madrid, Spain.
10.
Cesnik, C.E.S. and Shin, S.-J.2001. ‘‘On the Modeling of Active Helicopter Blades ,’’ International Journal of Solids and Structures , 38:1765-1789.
11.
Cook-Chennault, K.A., Thambi, N. and Sastry, A.M.2008. ‘‘Powering MEMS Portable Devices - a Review of Non-regenerative and Regenerative Power Supply Systems with Emphasis on Piezoelectric Energy Harvesting Systems,’’Smart Materials and Structures, 17:043001.
12.
De Marqui Jr, C., Erturk, A. and Inman, D.J.2009a. ‘‘An Electromechanical Finite Element Model for Piezoelectric Energy Harvester Plates,’’Journal of Sound and Vibration, 327:9-25.
13.
De Marqui Jr, C., Erturk, A. and Inman, D.J.2009b. ‘‘Finite Element Analysis of a UAV Wing Spar with Piezoceramics for Vibration Energy Harvesting,’’ In: 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA.
14.
Elvin, N.G. and Elvin, A.A.2009. ‘‘A Coupled Finite Element- Circuit Simulation Model for Analyzing Piezoelectric Energy Generators,’’Journal of Intelligent Material Systems and Structures, 20:587-595.
15.
Erturk, A. and Inman, D.J.2008a. ‘‘Issues in Mathematical Modeling of Piezoelectric Energy Harvesters,’’Smart Materials and Structures , 17:065016 (14pp).
16.
Erturk, A. and Inman, D.J.2008b. ‘‘A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters,’’ASME Journal of Vibration and Acoustics, 130:041002.
17.
Erturk, A. and Inman, D.J.2009. ‘‘An Experimentally Validated Bimorph Cantilever Model for Piezoelectric Energy Harvesting from Base Excitations,’’Smart Materials and Structures, 18:025009 (18pp).
18.
Erturk, A., Renno, J.M. and Inman, D.J.2009a. ‘‘Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs,’’Journal of Intelligent Material Systems and Structures, 20:529-544.
19.
Erturk, A., Tarazaga, P., Farmer, J.R. and Inman, D.J.2009b. ‘‘Effect of Strain Nodes and Electrode Configuration on Piezoelectric Energy Harvesting from Cantilevered Beams,’’ASME Journal of Vibration and Acoustics, 131:011010.
20.
Friedmann, P.P.1998. ‘‘Rotary-wing Aeroelastic Scaling and its Application to Adaptive Materials Based Actuation,’’ In: 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, and AIAA/ASME/AHS Adaptive Structures Forum , Long Beach, CA.
21.
Harder, R.L. and Desmarais, R.N.1972. ‘‘Interpolation using Surface Splines, ’’ Journal of Aircraft, 9:189-191.
22.
http://www.efunda.com/materials/piezo/material_data (Accessed December 2009).
23.
Katz, J. and Plotkin, A.2001. Low Speed Aerodynamics, Cambridge University Press, Cambridge.
24.
Kim, S., Clark, W.W. and Wang, Q.M.2005a. ‘‘Piezoelectric Energy Harvesting with a Clamped Circular Plate: Analysis,’’ Journal of Intelligent Material Systems and Structures, 16:847-854.
25.
Kim, S., Clark, W.W. and Wang, Q.M.2005b. ‘‘Piezoelectric Energy Harvesting With a Clamped Circular Plate: Experimental Study,’’ Journal of Intelligent Material Systems and Structures, 16:855-863.
26.
Lambert, J.D.1991. Numerical Methods for Ordinary Differential Systems: The Initial Value Problem, Wiley, Chichester .
27.
Lazarus, K.B., Crawley, E.F. and Lin, C.Y.1995. ‘‘Fundamental Mechanism of Aeroelastic Control with Control Surface and Strain Actuation,’’ Journal of Guidance, Control and Dynamics, 18:10-17.
28.
Librescu, L. and Na, S.2000. ‘‘Vibration and Dynamic Response Control of Elastically Tailored Nonuniform Adaptive Aircraft Wings,’’41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference and Exhibit, Atlanta, GA.
29.
Magoteaux, K.C., Sanders, B. and Sodano, H.A.2008. ‘‘Investigation of Energy Harvesting Small Unmanned Air Vehicle,’’ In: Smart Structures and Materials 2008: Active and Passive Smart Structures and Integrated Systems II Proc. SPIE 6928, San Diego.
30.
McGowan, A.R., Heeg, J. and Lake, R.1996. ‘‘Results of Wind-tunnel Testing from the Piezoelectric Aeroelastic Tailoring Investigation,’’ In: 37th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Salt Lake City, UT.
31.
Pines, D.J. and Bohorquez, F.2006. ‘‘Challenges Facing Future Micro-Air-Vehicle Development,’’ Journal of Aircraft, 43:290-305.
32.
Priya, S.2007. ‘‘Advances in Energy Harvesting using Low Profile Piezoelectric Transducers,’’ Journal of Electroceramics, 19:167-184.
33.
Rupp, C.J., Evgrafov, A., Maute, K. and Dunn, M.L.2009. ‘‘Design of Piezoelectric Energy Harvesting Systems: A Topology Optimization Approach Based on Multilayer Plates and Shells,’’Journal of Intelligent Material Systems and Structures, 20:1923-1939.
34.
Schultz, M.R. and Hyer, M.W.2004. ‘‘A Morphing Concept based on Unsymmetric Composite Laminates and Piezoceramic MFC Actuators,’’ In: 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA.
35.
Sheta, E.F., Moses, R.W., Huttsell, L.J. and Harrand, V.J.2003. ‘‘Active Control of F/A-18 Vertical Tail Buffeting using Piezoelectric Actuators,’’ In: 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference , Norfolk, VA.
36.
Sodano, H.A., Inman, D.J. and Park, G.2004. ‘‘A Review of Power Harvesting from Vibration Using Piezoelectric Materials,’’ The Shock and Vibration Digest, 36:197-205.
37.
Wickramasinghe, V.K., Chen, Y. and Zimcik, D.G.2007. ‘‘Experimental Evaluation of an Advanced Buffet Suppression System on Full-scale F/A-18 Fin,’’ Journal of Aircraft, 44:733-740.
38.
Yang, Y. and Tang, L.2009. ‘‘Equivalent Circuit Modeling of Piezoelectric Energy Harvesters,’’Journal of Intelligent Material Systems and Structures, 20:2223-2235.
