Design,Fabrication,and Modeling of a Four-bar Electromagnetic Vibration Power Generator

Abstract

In this article, we report an electromagnetic vibration energy harvesting structure with efficiency approaching close to the theoretical limit. The structure was modeled to account for geometrical variation in magnetic field, velocity field, and the conductor orientation with respect to magnetic field patterns. A four-bar magnet geometry was selected, which allows for an easily manufactured device with high amount of electrical damping on the structure, and thus a close to optimal amount of power generated. Using standard modeling approaches in the literature for electromagnetic harvesters, it can be found that for this particular geometry, the prediction of the power output as a function of load resistance yields inaccurate results and overpredicts the optimal load resistance for the device. We present a comprehensive modeling approach for this geometry incorporating all the design variables, which contribute to a more accurate estimate of the power output as a function of load resistance. The model was validated against the fabricated prototype and consistent results were obtained.

Keywords

energy harvesting electromagnetic vibration.

Get full access to this article

View all access options for this article.

References

Amirtharajah, R. and Chandrakasan, A. 1998. ‘‘Self-powered Signal Processing Using Vibration-based Power Generation,’’ IEEE Journal of Solid State Circuits, 33(5):687-695.

Beeby, S. , Torah, R. , Tudor, M. , Glynne-Jones, P. , O’Donnell, T. , Saha, C. and Roy, S. 2007a. ‘‘A Micro Electromagnetic Generator for Vibration Energy Harvesting,’’ Journal of Micromechanics and Microengineering, 17:1257-1265.

Beeby, S. , Tudor, M. , Torah, R. , Roberts, S. , O’Donnel, T. and Roy, S. 2007b. ‘‘Experimental Comparison of Macro and Micro Scale Electromagnetic Vibration Powered Generators,’’ Microsystems Technology, 13:1647-1653.

Chao, P. and Wang, I. 2006. ‘‘Dynamical Modeling and Experimental Validation of a Micro-speaker with Corrugated Diaphragm for Mobile Phones, ’’ Microsystems Technology, 13:1241-1252.

El-Hami, M. , Glynne-Jones, P. , White, N. , Hill, M. , Beeby, S. , James, E. , Brown, A. and Ross, J. 2001. ‘‘Design and Fabrication of a New Vibration-based Electromechanical Power Generator,’’ Sensors and Actuators, 92:335-342.

Gartenhaus, S. 1975. Physics: Basic Principles, Vol. II, Holt, Rinehart, and Winston, Inc., New York.

Glynne-Jones, P. , Tudor, M. , Beeby, S. and White, N. 2004. ‘‘An Electromagnetic, Vibration-powered Generator for Intelligent Sensor Systems,’’ Sensors and Actuators A, 110:344-349.

Stephen, N. 2006. ‘‘On Energy Harvesting from Ambient Vibration ,’’ Journal of Sound and Vibration, 293:409-425.

Laura, P. , Pombo, J. and Susemihl, E. 1975. ‘‘A Note on the Vibrations of a Clamped-free Beam with a Mass at the Free End,’’ Journal of Sound and Vibration, 37(2):161-168.

10.

Nakano, K. , Elliott, S. and Rustighi, E. 2007. ‘‘A Unified Approach to Optimal Conditions of Power Harvesting Using Electromagnetic and Piezoelectric Transducers, ’’ Smart Materials and Structures, 16:948-958.

11.

O’Donnell, T. , Saha, C. , Beeby, S. and Tudor, J. 2007. ‘‘Scaling Effects for Electromagnetic Vibrational Power Generators,’’ Microsystems Technology, 13:1637-1645.

12.

Poulin, G. , Sarraute, E. and Costa, F. 2004. ‘‘Generation of Electrical Energy for Portable Devices,’’ Sensors and Actuators A, 116:461-471.

13.

Roundy, S. 2005. ‘‘On the Effectiveness of Vibration-based Energy Harvesting,’’ Journal of Intelligent Material Systems and Structures, 16:809-823.

14.

Williams, C. and Yates, B. 1996. ‘‘Analysis of a Micro-Electric Generator for Microsystems,’’ In: The 8th International Conference on Solid-state Sensors and Actuators, and Eurosensors IX, Stockholm, Sweden, 25-29 June, pp. 369-372.