The viscoplastic behavior in high-temperature shape memory alloys and its interaction with the transformation behavior is investigated in this work. Standard creep tests and isobaric transformation-induced tests were conducted for a TiPdNi high-temperature shape memory alloy on a uniaxial frame fitted with a custom high-temperature setup. Motivated by the experimental observations indicating simultaneous creep and phase transformation, a 1D constitutive model is presented that aims to capture the coexistence of the rate-independent transformation and the rate-dependent viscoplastic behavior. Based on continuum thermodynamics, the evolution equations for forward and reverse transformation and viscoplasticity are properly chosen. The material parameters needed for the model calibration are identified from the experimental data. The predicted material response by the proposed constitutive model is in good agreement with the experimental results.
Anand, L. and Gurtin, M.E.2003. ‘‘Thermal Effects in the Superelasticity of Crystalline Shape Memory Materials,’’ Journal of the Mechanics and Physics of Solids, 51:1015-1058.
2.
Biggs, T., Cortie, M.B., Witcomb, M.J. and Cornish, L.A.2003. ‘‘Platinum Alloys for Shape Memory Applications ,’’ Platinum Metals Review, 47:142-146.
3.
Birman, V.1997. ‘‘Review of Mechanics of Shape Memory Alloy Structures,’’ Applied Mechanics Reviews, 50:629-645.
4.
Bo, Z. and Lagoudas, D.C.1999. ‘‘Thermomechanical Modeling of Polycrystalline SMAs Under Cyclic Loading, Part III: Evolution of Plastic Strains and Two-way Shape Memory Effect,’’ International Journal of Engineering Science, 37:1175-1203.
5.
Boyd, J. and Lagoudas, D.C.1996. ‘‘A Thermodynamical Constitutive Model for Shape Memory Materials. Part I: The Monolithic Shape Memory Alloy, ’’ International Journal of Plasticity, 12:805-842.
6.
Brinson, L.C.1993. ‘‘One-dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-constant Material Functions and Redefined Martensite Internal Variable,’’ Journal of Intelligent Material Systems and Structures, 4:229-242.
7.
Chatzigeorgiou, G. and Lagoudas, D.C.2009. ‘‘A Constitutive Model for High Temperature SMA’s Exhibiting Viscoplastic Behavior,’’Proceedings of SPIE, 7289: 72890U 1-7.
8.
Doonkersloot, H.C. and Vucht, V.1970. ‘‘Martensitic Transformations in Au-Ti, Pd-Ti and Pt-Ti Alloys,’’ Journal of Less Common Metals , 20:83-91.
9.
Eggeler, G., Khalil-Allafi, J., Neuking, K. and Dlouhy, A.2002. ‘‘Creep of Binary Ni-rich NiTi Shape Memory Alloys and the Influence of Pre-creep on Martensitic Transformations, ’’ Zeitschrift für Metallkunde, 93:654-660.
10.
Fosdick, R. and Ketema, Y.1998. ‘‘Shape Memory Alloys for Passive Vibration Damping,’’ Journal of Intelligent Material Systems and Structures, 9:854-870.
11.
Germain, P.1973. Cours de Mécanique des Milieux Continus, Tome I: Théorie Générale, Masson, Paris.
12.
Germain, P., Nguyen, Q.S. and Suquet, P.1983. ‘‘Continuum Thermodynamics, ’’ Journal of Applied Mechanics, 50:1010-1020.
13.
Golberg, D., Xu, Y., Murakami, Y., Otsuka, K., Ueki, T. and Horikawa, H.1995. ‘‘High-Temperature Shape Memory Effect in Ti50 Pd50 - x Nix(x = 10, 15, 20) Alloys,’’Materials Letters, 22:241-248.
14.
Graesser, E.J. and Cozzarelli, F.A.1991. ‘‘Shape Memory Alloys as New Materials for Aseismic Isolation,’’ Journal of Engineering Mechanics , 117:2590-2608.
15.
Halphen, B. and Nguyen, Q.S.1975. ‘‘Sur les Matériaux Standards Généralisés,’’Journal de Mécanique, 14:39-63.
16.
Kobus, E., Neuking, K., Eggeler, G. and Wittkamp, I.2002. ‘‘The Creep Behaviour of a NiTi-alloy and the Effect of Creep Deformation on it’s Shape Memory Properties, ’’ Practical Metallography, 39:177-186.
17.
Kumar, P.K., Lagoudas, D.C., Zanca, K.J. and Lagoudas, M.Z.2006. ‘‘Thermomechanical Characterization of High Temperature SMA Actuators,’’ In: Proceedings of SPIE, 6170:306-312.
18.
Lagoudas, D.C. (ed.) 2008. Shape Memory Alloys: Modeling and Engineering Applications, Springer, New York.
19.
Lagoudas, D.C., Bo, Z. and Qidwai, M.A.1996. ‘‘A Unified Thermodynamic Constitutive Model for SMA and Finite Element Analysis of Active Metal Matrix Composites, ’’ Mechanics of Composite Materials and Structures, 3:153-179.
20.
Lagoudas, D.C., Entchev, P.B., Popov, P., Patoor, E., Brinson, L.C. and Gao, X.2006. ‘‘Shape Memory Alloys, Part II: Modeling of Polycrystals,’’ Mechanics of Materials, 38:430-462.
21.
Leclercq, S. and Lexcellent, C.1996. ‘‘A General Macroscopic Description of the Thermomechanical Behavior of Shape Memory Alloys,’’Journal of the Mechanics and Physics of Solids, 44:953-980. Lemaitre, J. and Chaboche, J.-L.2002. Mechanics of Solid Materials, Cambridge University Press, Cambridge.
22.
Lexcellent, C., Robinet, P., Bernardini, J., Beke, D.L. and Olier, P.2005. ‘‘High Temperature Creep Measurements in Equiatomic Ni-Ti Shape Memory Alloy,’’ Materialwissenschaft und Werkstofftechnik, 36:509-512.
23.
Liang, C. and Rogers, C.A.1990. ‘‘One-dimensional Thermomechanical Constitutive Relations for Shape Memory Materials,’’ Journal of Intelligent Material Systems and Structures, 1:207-234.
24.
Lidquist, P. and Wayman, C.M.1990. ‘‘Shape Memory and Transformation Behavior of Martensitic Ti-Pd-Ni and Ti-Pt-Ni Alloys,’’ Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann, London.
25.
Machado, L.M., Popov, P. and Lagoudas, D.C.2009. ‘‘Constitutive Model for Pollycrystalline Shape Memory Alloys with Smooth Transformation Hardening,’’International Journal of Engineering Science (submitted).
26.
Mukherjee, A.K.1968. ‘‘High-temperature-creep Mechanism of TiNi ,’’ Journal of Applied Physics, 39:2201-611.
27.
Noebe, R., Draper, S., Gaydosh, D., Garg, A., Lerch, B., Bigelow, G. and Padula II, S.2006. ‘‘Effect of Thermomechanical Processing on the Microstucture, Properties, and Work Behavior of a Ti50.5Ni49.5Pt20 High-temperature Shape Memory Alloy,’’ In: Proceedings of the International Conference on Shape Memory and Superelastic Technologies , ASM International, Metals Park, OH.
28.
Oppenheimer, S.M., Yung, A.R. and Dunand, D.C.2007. ‘‘Power-law Creep in Near-equiatomic Nickel-Titanium Alloys,’’ Scripta Materialia, 57:377-380.
29.
Otsuka, K., Oda, K., Ueno, Y. and Piao, M.1993. ‘‘The Shape Memory Effect in a Ti50Pd50 Alloy ,’’ Scripta Metallurgica et Materialia, 29:1355-1358.
30.
Otsuka, K. and Wayman, C.M. (eds) 1999. Shape Memory Materials, Cambridge University Press, Cambridge.
31.
Padula II, S., Bigelow, G., Noebe, R., Gaydosh, D. and Garg, A.2006. ‘‘Challenges and Progress in the Development of High-temperature Shape Memory Alloys Based on NiTiX Compositions for High-force Actuator Applications,’’ In: Proceedings of the International Conference on Shape Memory and Superelastic Technologies , ASM International, Metals Park, OH.
32.
Paiva, A. and Savi, M.A.2006. ‘‘An Overview of Constitutive Models for Shape Memory Alloys,’’Mathematical Problems in Engineering , 2006:1-30.
33.
Paiva, A., Savi, M.A., Braga, A.M.B. and Pacheco, P.M.C.L. 2005. ‘‘A Constitutive Model for Shape Memory Alloys Considering Tensile-compressive Assymetry and Plasticity,’’International Journal of Solids and Structures, 42:3439-3457.
34.
Perkins, J.1975. Shape Memory Effects in Alloys, Plenum Press, New York.
35.
Pu, Z., Tseng, H. and Wu, K.1995. ‘‘Martensite Transformation and Shape-memory Effect of NiTi-Zr High- temperature Shape-memory Alloys,’’ In: Proceedings of SPIE, Vol. 2441. pp. 171.
36.
Qidwai, M.A. and Lagoudas, D.C.2000. ‘‘On Thermodynamics and Transformation Surfaces of Polycrystalline NiTi Shape Memory Alloy Material,’’ International Journal of Plasticity, 16:1309-1343.
37.
Rajagopal, K.R. and Srinivasa, A.R.1999. ‘‘On the Thermomechanics of Shape Memory Wires,’’Zeitschrift für angewandte Mathematik und Physik, 50:459-496.
38.
Rockafellar, T.1970. Convex Analysis, Princeton University Press, Princeton.
39.
Savi, M., Paiva, A., Baêta-Neves, A.P. and Pacheco, P.M.C.L.2002. ‘‘Phenomenological Modeling and Numerical Simulation of Shape Memory Alloys: A Thermo-plastic-phase Transformation Coupled Model,’’Journal of Intelligent Material Systems and Structures, 13:261-273.
40.
Shimizu, S., Xu, Y., Okunishi, E., Tanaka, S., Otsuka, K. and Mitose, K.1998. ‘‘Improvement of Shape Memory Characteristics by Precipitation Hardening of Ti-Pd-Ni Alloys,’’ Materials Letters, 34:23-29.
41.
Tanaka, K., Kobayashi, S. and Sato, Y.1986. ‘‘Thermomechanics of Transformation Pseudoelasticity and Shape Memory Effect in Alloys,’’ International Journal of Plasticity, 2:59-72.
42.
Thoma, P.E. and Boehm, J.J.1999. ‘‘Effect of Composition on the Amount of Second Phase and Transformation Temperatures of NixTi90-xHf10 Shape Memory Alloys,’’Materials Science and Engineering A, 273-275:385-389.
