A modally selective, variable-length anisotropic piezocomposite transducer is designed for guided wave (GW) structural health monitoring applications. The transducer dimensions needed to maximize individual modes are selected based on 3D elasticity models for GW excitation by finite dimensional transducers. This theory is used to determine these transducer dimensions as a function of the wave phase velocity, and normalized by the substrate thickness. The design and fabrication of the transducer are subsequently described, and a set of experimental tests is conducted in pristine isotropic structures to characterize the actuation and sensing performance of the device. It is shown that the transducer dimensions can be tailored to obtain specific symmetric to antisymmetric mode transmission and sensing ratios.
Alleyne, D. and Cawley, P.1992. ‘‘The Interaction of Lamb Waves with Defects,’’ IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 39(3):381-397.
2.
Bent, A.A. and Hagood, N.W.1995. ‘‘Anisotropic Actuation with Piezoelectric Fiber Composites,’’ Journal of Intelligent Materials Systems and Structures, 6(3):338-349.
3.
Chen, F. and Wilcox, P.D.2007. ‘‘The Effect of Load on Guided Wave Propagation ,’’ Ultrasonics, 47(4):111-122.
4.
Clarke, T. and Cawley, P.2008. ‘‘Monitoring of Complex Structures Using Guided Waves,’’ In: Proceedings of the 4th European Workshop on Structural Health Monitoring, Krakow , Poland.
5.
Crawley, E.F. and de Luis, J.1987. ‘‘Use of Piezoelectric Actuators as Elements of Intelligent Structures,’’ AIAA Journal , 25(10): 1373-1385.
6.
Diamanti, K., Hodgkinson, J.M. and Soutis, C.2004. ‘‘Detection of Low-velocity Impact Damage in Composite Plates Using Lamb Waves,’’ Structural Health Monitoring, 3(1):33-41.
7.
Diamanti, K., Soutis, C. and Hodgkinson, J.M.2005. ‘‘Nondestructive Inspection of Sandwich and Repaired Composite Laminated Structures,’’ Composites Science and Technology, 65(3):2059-2067.
8.
Diamanti, K., Soutis, C. and Hodgkinson, J.M.2007. ‘‘Piezoelectric Transducer Arrangement for the Inspection of Large Composite Structures,’’ Composites A, 38(4):1121-1130.
9.
Diligent, O. and Lowe, M.J.S.2005. ‘‘Reflection of the s0 Lamb Mode from a Flat Bottom Circular Hole,’’ Journal of the Acoustical Society of America, 118(5):2869-2879.
10.
Fromme, P., Wilcox, P., Lowe, M. and Cawley, P.2004. ‘‘On the Scattering and Mode Conversion of the A0 Lamb Wave Mode at Circular Defects in Plates,’’ Review of Progress in QNDE, 22A:142-149.
11.
Graff, K.1991. Wave Motion in Elastic Solids, Dover Publications, New York.
12.
Konstantinidis, G., Drinkwater, B.W. and Wilcox, P.D.2006. ‘‘The Temperature Stability of Guided Wave Structural Health Monitoring Systems,’’ Smart Materials and Structures, 15(4): 967-976.
13.
Lowe, M.J.S., Cawley, P., Kao, J.-Y. and Diligent, O.2002. ‘‘The Low Frequency Reflection Characteristics of the Fundamental Antisymmetric Lamb Wave a0 from a Rectangular Notch in a Plate,’’ Journal of the Acoustical Society of America, 112(6): 2612-2622.
14.
Monkhouse, R.S.C., Wilcox, P.D. and Cawley, P.1997. ‘‘Flexible Interdigital PVDF Transducers for the Generation of Lamb Waves in Structures,’’ Ultrasonics, 35(7):489-498.
15.
Monkhouse, R.S.C., Wilcox, P.D., Lowe, M.J.S., Dalton, R.P. and Cawley, P.2000. ‘‘The Rapid Monitoring of Structures Using Interdigital Lamb Wave Transducers,’’ Smart Materials and Structures, 9(3):304-309.
16.
Pavlakovic, B. and Lowe, M.J.S.2007. Disperse Software Manual version 2.0.16d, Imperial College London, UK.
17.
Pelts, S.P., Jiao, D. and Rose, J.L.1996. ‘‘A Comb Transducer for Guided Wave Generation and Mode Selection,’’ In: Proceedings of the IEEE Ultrasonics Symposium, Vol. 2, pp. 857-860.
Raghavan, A. and Cesnik, C.E.S.2005. ‘‘Finite-dimensional Piezoelectric Transducer Modeling for Guided Wave Based Structural Health Monitoring, ’’ Smart Materials and Structures, 14(6):1448-1461.
20.
Raghavan, A. and Cesnik, C.E.S.2007a. ‘‘Review of Guided-wave Based Structural Health Monitoring,’’ The Shock and Vibration Digest , 39(2):91-114.
21.
Raghavan, A. and Cesnik, C.E.S., 2007b, ‘‘Studies on Effects of Elevated Temperature for Guided-wave Structural Health Monitoring,’’ In: Proceedings of the 14th SPIE International Symposium on Smart Structures and Materials/NDE and Health Monitoring, San Diego, CA.
22.
Raghavan, A. and Cesnik, C.E.S.2007c. ‘‘3-D Elasticity-based Modeling of Anisotropic Piezocomposite Transducers for Guided Wave Structural Health Monitoring , ’’ Journal of Vibration and Acoustics, 129(6):739-751.
23.
Salas, K.I. and Cesnik, C.E.S.2008a. ‘‘Design and Characterization of the CLoVER Transducer for Structural Health Monitoring,’’ In: Proceedings of the 15th SPIE International Symposium on Smart Structures and Materials/NDE and Health Monitoring, San Diego CA.
24.
Salas, K.I. and Cesnik, C.E.S.2008b. ‘‘Guided Wave Experimentation using CLoVER Transducers for Structural Health Monitoring,’’ In: Proceedings of the 16thAIAA/ASME/AHS Adaptive Structures Conference , Schaumburg, IL.
25.
Salas, K.I. and Cesnik, C.E.S.2009. ‘‘Guided Wave Excitation by a CLoVER Transducer: Theory and Experiments,’’Smart Materials and Structures, 18(7):075005.
26.
Wilkie, W.K. and High, J.W.2003. Method of Fabricating NASAstandard Macro-fiber Composite Piezoelectric Actuators, NASA Technical Report TR-2003-212427.
27.
Williams, R.B.2004. ‘‘Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fiber Composites’’, PhD Thesis , Virginia Polytechnic Institute and State University , Blacksburg, VA.
