Conventional four-bar crank rocker mechanisms made of rigid links can generate only one path, at the rocker tip, for one revolution of the crank. However, if the rocker length can be actively changed then its tip can generate a work volume. This study describes an application of ionic polymer metal composite (IPMC) as a partially compliant rocker in a four-bar mechanism for work volume generation. First, an experiment is conducted to study the voltage verses bending characteristics of IPMC and based on the experimental data the IPMC is modeled using a pseudo rigid body model. The model is based on the fix-pin support type of cantilever mode and its derivation is explained in detail. The maximum and minimum length of the rocker is controlled by changing the voltage applied to it and this generates a work volume for one revolution of the crank. Simulation results are compared with the experimentally obtained work volume and the differences are found. The proposed mechanism has the potential for application in micro positioning, compliant structures, etc.
Bar-Cohen, Y., Bao, X., Sherrit, S. and Lih, S.S.2002. ``Characterization of the Electrochemical Properties of Ionic Polymer-Metal Composite (IPMC),'' In: Proceedings, SPIE Smart Structures and Materials Symposium, EAPAD Conference , (page no) San Diego, CA, March 18-21.
2.
Bandopadhya, D., Bhattacharya, B. and Dutta, A.2007a. ``An Active Vibration Control Strategy for a Flexible Link Using Distributed Ionic Polymer Metal Composites,'' Smart Materials and Structures, 16(3):617-625.
3.
Bandopadhya, D., Bhattacharya, B., Dutta, A.2007b. ``Active Vibration Control Strategy for a Single Link Flexible Manipulator using Ionic Polymer Metal Composites, '' Journal of Intelligent Material Systems and Structures, 19(4):487-496.
4.
Fearing, R., Chiang, K., Dickinson, M., Pick, D., Sitti, M. and Yan, J.2000. ``Transmission Mechanism for a Micromechanical Flying Insect,'' In: Proceedings of the IEEE International Conference on Robotics and Automation, pp. 1509-1516, San Francisco, CA USA, Apr.
5.
Garcia, C.E. and Goldfarb, M.M.1998. ``Actuator Development for a Flapping Microrobotic Microaerial Vehicle,'' In: SPIE Microrobotics Symposium , Nov., Boston, USA.
6.
Hong, B. and Erdman, A.G.2005. ``A Method for Adjustable Planer and Spherical Four Abr (Bar) Linkage Synthesis,'' ASME Journal of Mechanism (Mechanical) Design, 127(3):456-463.
Howell, L.L. and Midha, A.1994. ``A Method for the Design of Compliant Mechanisms with Small-length Flexural Pivots,'' Journal of Mechanical Design , 116(1):280-290.
9.
Kim, K.J. and Shahinpoor, M.2003. ``Ionic Polymer Metal Composites-II Manufacturing Technique ,'' Smart Materials and Structure, 12(1):65-69.
10.
Lee, D.Y., Park, S., Lee, M.H., Kwang, J.K. and Heo, S.2007. ``Ionic Polymer-metal Composite Bending Actuator Loaded with Multi-walled Carbon Nanotubes,'' Sensors and Actuators , 133(1):117-127.
11.
Lin, M.C. and Chen, J.S.1996. ``Experiments toward MRAC Design for Linkage System , '' Mechatron, 6(8):933-953.
12.
Midha, A., Howell, L.L. and Tony, W.N.2000. ``Limit Positions of Compliant Mechanisms using the Pseudo-rigid-body Model Concept,'' Mechanism and Machine Theory, 35(1):99-115.
13.
Norton, T.W., Howell, L.L. and Midha, A.1994. ``Graphical Synthesis for Limit Positions of a Four-bar Mechanism using the Triangle Inequality Concept, '' Journal of Mechanical Design, 116(4):1132-1140.
14.
Sitti, M.2001. ``PZT Actuated Four-Bar Mechanism with Two Flexible Links for Micromechanical Flying Insect Thorax,'' In: Proceedings of the IEEE, International Conference on Robotics and Automation , (page no) Seoul, Korea, May 21-26.
15.
Saggere, L. and Kota, S.2001. ``Synthesis of Planer, Compliant Four Bar Mechanisms for Compliant Segment Motion Generation,'' ASME Journal of Mechanical Design, 123(4):535-541.
16.
Shahinpoor, M. and Kim, K.J.2000. ``The Effect of Surface Electrode Resistance on the Performance of Ionic-polymer Metal Composite (IPMC) Artificial Muscles , '' Smart Materials and Structures, 9(4):543-551.
17.
Shahinpoor, M. and Kim, K.J.2001. ``Ionic Polymer Metal Composites Fundamentals I , '' Smart Materials and Structures, 10(4):819-833.
18.
Shahinpoor, M. and Kim, K.J.2004. ``Ionic Polymer-metal Composites: III. Modeling and Simulation as Biomimetic Sensors, Actuators, Transducers, and Artificial Muscles,''Smart Materials and Structures, 13(6):1362-1388.
19.
Shahinpoor, M. and Kim, K.J.2005. ``Ionic Polymer-metal Composites: IV. Industrial and Medical Applications,'' Smart Materials and Structures , 14(1):197-214.
20.
Shahinpoor, M., Bar-Cohen, Y., Simpson, J.O. and Smith, J.1998. ``Ionic Polymer-Metal Composites (IPMC) as Biomimetic Sensors, Actuators & Artificial Muscles - A Review,'' Smart Materials and Structures, 7(6):15-30.
21.
Shimoyama, M.H., Suzuki, K. and Ezura, Y.1993. ``Insect-like Microrobots with External Skeletons , '' IEEE Control Systems Magazine, 13(1):37-41.
22.
Tao, J. and Sadler, J.P.1995. ``Constant Speed Control of a Motor Driven Mechanism System ,'' Mechanism and Machine Theory, 30(5):737-748.
23.
Ting, K.L.1989. ``Mobility Criteria of Single-loop N-bar Linkages,'' Journal of Mechanisms, Transmissions, and Automation in Design, Trans. ASME, 111(4):504-507.
24.
Tokuz, L.C. and Uyan, S.1997. ``Modeling, Simulation and Control of a Four-bar Mechanism with a Brushless Servo Motor,'' Mechatron, 7(4):369-383.
25.
Yan, J., Wood, R., Avandhanula, S., Sitti, M. and Fearing, R.2001. ``Towards Flapping Wing Control for Micromechanical Flying Insect,'' In: Proceeding of the IEEE International Conference on Robotics and Automation, Korea.
26.
Zhang, W.J., Li, Q. and Guo, L.S.1999. ``Integrated Design of Mechanical Structure and Control Algorithm for a Programmable Four-Bar Linkage,''IEEE, ASME Tran., on Mechatronics, December, 4(4).
27.
Zeng, C., Xiabo, T. and Shahinpoor, M.2005. ``Quasi-Static Positioning of Ionic Polymer - Metal Composite (IPMC) Actuators,''IEEE/ASME International Conference 24-28 July, Monterey, California , USA.
