Experimental Investigation on the Aerodynamic Characteristics of a Bio-mimetic Flapping Wing with Macro-fiber Composites

Abstract

This study describes the development of a bio-mimetic flapping wing and the aerodynamic characteristics of a flexible flapping wing. First, the flapping wing is designed to produce flapping, twisting, and camber motions by using a bio-mimetic design approach. A structural model for a macro-fiber composite (MFC) actuator is established, and structural analysis of a smart flapping wing with the actuator is performed to determine the wing configuration for maximum camber motion. The analysis model is verified with the experimental data of the smart flapping wing. Second, aerodynamic tests are performed for the smart flapping wing in a subsonic wind tunnel, and the aerodynamic forces are measured for various test conditions. Additionally, the effects of camber and chordwise wing flexibility on unsteady and quasi-steady aerodynamic characteristics are discussed. The experimental results demonstrate that the effect of the camber generated by the MFC produces sufficient aerodynamic benefit. It is further found that chordwise wing flexibility is an important parameter in terms of affecting aerodynamic performance, and that lift produced in a quasi-steady flow condition is mostly affected by the forward speed and effective angle of attack.

Keywords

bird flight flapping wing macro-fiber composites (MFC)bio-mimetic design.

Get full access to this article

View all access options for this article.

References

Birch, J.M. and Dickinson, M.H. 2001. ``Spanwise Flow and the Attachment of the Leading-edge Vortex on Insect Wings,'' Nature, 412(6848):729—733.

Cote, F. , Masson, P. , Mrad, N. and Cotoni, V. 2004. ``Dynamic and Static Modelling of Piezoelectric Composite Structures Using a Thermal Analysis with MSC/NASTRAN, '' Composite Structures, 65(3—4):471—484.

Cox, A. , Monopoli, D. , Cveticanin, D. , Goldfarb, M. and Garcia, E. 2002. ``The Development of Elastodynamic Components for Piezoelectrically Actuated Flapping Micro-air Vehicles,'' Journal of Intelligent Material Systems and Structures, 13(9): 611—615.

DeLaurier, J.D. 1994. ``An Ornithopter Wing Design,'' Canadian Aeronautics and Space Journal, 40(1):10—18.

Dhawan, S. 1991. ``Bird Flight,'' Sadhana, 16(4):275—325.

Ellington, C.P. , Van den Berg, C., Willmott, A.P. and Thomas, A.L.R . 1996. ``Leading Edge Vortices in Insect Flight,'' Nature, 384(6610):626—630.

Ho, S. , Nessef, H. , Pornsin-sirirak, T.N. , Tai, Y.C. and Ho, C.M. 2003. ``Unsteady Aerodynamics and Flow Control for Flapping Wing Flyers,'' Progress in Aerospace Sciences, 39(8):635—681.

Jones, K.D. and Platzer, M.F. 2000. ``Flapping-wing Propulsion for a Micro Air Vehicle ,'' The 38th Aerospace Sciences Meeting & Exhibit , AIAA-2000-0897, January 10—13.

Jones, K.D. , Bradshaw, C.J. , Papadopoulos, J. and Platzer, M.F. 2004. ``Improved Performance and Control of Flapping-wing Propelled Micro Air Vehicles,'' The 42nd Aerospace Sciences Meeting & Exhibit, AIAA-2004-0399, January 5—8.

10.

Jones, K.D. , Lund, T.C. and Platzer, M.F. 2000. ``Experimental and Computational Investigation of Flapping-wing Propulsion for Micro Air Vehicles,'' Conference on Fixed, Flapping and Rotary Wing Vehicles at very Low Reynolds Numbers, Notre Dame, Indiana, June 5—7.

11.

Liger, M. , Pornsin-sirirak, T.N. , Tai, Y.C. , Ho, S. and Ho, C.M. 2002. ``Large-area Electrostatic-valved Skins for Adaptive Flow Control on Ornithopter Wings,'' Solid-state Sensor, Actuator, and Microsystems Workshop, January 2—6.

12.

Lin, C.S. , Hwu, C.B. and Young, W.B. 2005. ``The Thrust and Lift of an Ornithopter's Membrane Wings with Simple Flapping Motion,'' Aerospace Science and Technology , 10(2):111—119.

13.

Park, H.C. , Kim, K.J. , Lee, S.K. and Chah, Y.J. 2004. ``Electromechanical Flapping produced by Ionic Polymer-metal Composites,'' Proceedings of SPIE-Smart Structures and Materials , 5385:242—248.

14.

Polhamus, E. 1971. ``Predictions of Vortex-lift Characteristics by a Leading-edge Suction Analogy,'' Journal of Aircraft, 8(4):193—199.

15.

Pornsin-sirirak, T.N. , Tai, Y.C. , Ho, C.M. and Keennon, M. 2001a. ``Microbat: A Palm-sized Electrically Powered Ornithopter ,'' NASA/JPL Workshop on Biomorphic Robotics, Pasadena, CA, August 14—17.

16.

Pornsin-sirirak, T.N. , Tai, Y.C. , Nassef, H. and Ho, C.M. 2001b. ``Titanium-alloy MEMS Wing Technology for a Micro Aerial Vehicle Application,'' Sensors and Actuators A, 89(1—2):95—103.

17.

Pornsin-sirirak, T.N. , Liger, M. , Tai, Y.C. , Ho, S. and Ho, C.M. 2001c. ``Flexible Parylene-valved Skin for Adaptive Flow Control ,'' The 15th IEEE International MEMS Conference , Las Vegas, January 20—24.

18.

Sane, S. 2003. ``The Aerodynamics of Insect Flight,'' The Journal of Experimental Biology, 206(23):4191—4208.

19.

Shyy, W. , Berg, M. and Ljungqvist, D. 1999. ``Flapping and Flexible Wings for Biological and Micro Air Vehicles,'' Progress in Aerospace Sciences, 35(5):455—505.

20.

Syaifuddin, M. , Park, H.C. , Yoon, K.J. and Goo, N.S. 2005. ``Design and Evaluation of LIPCA-actuated Flapping Device ,'' Proceedings of SPIE-Smart Structures and Materials , 5764: 151—158.