In this article biaxial constrained recovery in a thick-walled shape memory alloy (SMA) ring with a rectangular cross-section is modeled using the theory of generalized plasticity, which is developed by Jacob Lubliner and Ferdinando Auricchio. As a mechanical obstacle that delays free recovery in a SMA ring, a steel ring is used. The result of constrained recovery is the generation of high stresses in both the rings. All equations are written in a closed form in terms of infinite series. Theoretical results are compared with experimental findings and good agreement is found when SMA rings are in the domain of recoverable strains.
Auricchio, F.1995. ``Shape-memory Alloys: Applications, Micromechanics, Macromodelling and Numerical Simulations,'' Ph.D. Thesis, University of California at Berkeley.
2.
Auricchio, F. and Lubliner, J.1997. ``A Uniaxial Model for Shape-memory Alloys, '' International Journal of Solids and Structures, 34(27):3601-3618.
Boyd, J.G. and Lagoudas, D.C.1996a. ``A Thermodynamical Constitutive Model for Shape Memory Materials. PartI. The Monolithic Shape Memory Alloy,'' International Journal of Plasticity, 12(6):805-842.
6.
Boyd, J.G. and Lagoudas, D.C.1996b. ``A Thermodynamical Constitutive Model for Shape Memory Materials. Part II. The SMA Composite Material,'' International Journal of Plasticity, 12(7):843-873.
7.
Brinson, L.C.1993. ``One-dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-constant Material Functions and Redefined Martensite Internal Variable,'' Journal of Intelligent Material Systems and Structures, 4(2):229-242.
8.
Brocca, M., Brinson, L.C. and Bažant, Z.P.2002. `` Three-Dimensional Constitutive Model for Shape Memory Alloys Based on Microplane Model,'' Journal of the Mechanics and Physics of Solids, 50(5):1051-1077.
9.
Edwards, G.R., Perkins, J. and Johnson, J.M.1975. ``Characterizing the Shape Memory Effect Potential of Ni-Ti Alloys,'' Scripta Metallurgica, 9(11):1167-1171.
10.
Furuya, Y., Shimada, H., Tanahashi, Y., Matsumoto, M. and Honma, T.1988. ``Evaluation of Recovery Bending Force of Shape Memory Ni-Ti Alloy,'' Scripta Metallurgica, 22(6):751-755.
11.
Ghorashi, M. and Inman, D.J.2004. ``Shape Memory Alloy in Tension and Compression and its Application as Clamping Force Actuator in a Bolted Joint: Part 2 - Modeling ,'' Journal of Intelligent Material Systems and Structures , 15(8):589-600.
12.
Hesse, T., Ghorashi, M. and Inman, D.J.2004. ``Shape Memory Alloy in Tension and Compression and its Application as Clamping Force Actuator in a Bolted Joint: Part 1 - Experimentation ,'' Journal of Intelligent Material Systems and Structures , 15(8):577-587.
13.
Huang, M., Gao, X. and Brinson, L.C.2000. ``A Multivariant Micromechanical Model for SMAs Part 2. Polycrystal Model,'' International Journal of Plasticity, 16(10-11):1371-1390.
14.
Ivshin, Y. and Pence, T.J.1994. ``A Thermomechanical Model for a One Variant Shape Memory Material,'' Journal of Intelligent Material Systems and Structures , 5(4):455-473.
15.
Kafka, V.1994. `` Shape Memory: A New Concept of Explanation and of Mathematical Modelling: Part I: Micromechanical Explanation of the Causality in the SM Processes,'' Journal of Intelligent Material Systems and Structures , 11(5):809-814.
16.
Kapgan, M. and Melton, K.N.1990. ``Shape Memory Alloy Tube and Pipe Couplings,'' In: Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann.
17.
Kato, H., Inagaki, N. and Sasaki, K.2004. ``A One-Dimensional Modelling of Constrained Shape Memory Effect,'' Acta Materialia, 52(11):3375-3382.
18.
Kosel, F. and Videnic, T.2007. ``Generalized Plasticity and Uniaxial Constrained Recovery in Shape Memory Alloys,'' Mechanics of Advanced Materials and Structures, 14(1):3-12.
19.
Lagoudas, D.C., Entchev, P.B., Popov, P., Patoor, E., Brinson, L.C. and Gao, X.2006. ``Shape Memory Alloys, Part II: Modeling of Polycrystals ,'' Mechanics of Materials, 38(5-6):430-462.
20.
Leclercq, S. and Lexcellent, C.1996. ``A General Macroscopic Description of the Thermomechanical Behavior of Shape Memory Alloys,'' Journal of the Mechanics and Physics of Solids, 44(6):953-980.
21.
Liang, C. and Rogers, C.A.1990. ``One-dimensional Thermomechanical Constitutive Relations for Shape Memory Materials,'' Journal of Intelligent Material Systems and Structures, 1(2):207-234.
22.
Lubliner, J. and Auricchio, F.1996. ``Generalized Plasticity and Shape-memory Alloys, '' International Journal of Solids and Structures, 33(7):991-1003.
23.
Madangopal, K., Ganesh Krishnan, R. and Banerjee, S.1988. ``Reversion Stresses in Ni-Ti Shape Memory Alloys,''Scripta Metellurgica, 22(10):1593-1598.
24.
Melton, K.N., Simpson, J. and Duerig, T.W.1986. ``A New Wide Hysteresis NiTi Based Shape Memory Alloy and its Applications,'' In: Proceedings of the International Conference on Martensitic Transformations (ICOMAT-86), The Japan Institute of Metals, 1053-1058.
25.
Mohamed, H.A.1978. ``Determination of the Recovery Stresses Developed by Shape Memory Alloys,'' Journal of Materials Science, 13(12):2728-2730.
26.
Nagaya, K. and Hirata, Y.1992. ``Analysis of a Coupling Made of Shape Memory Alloy and its Dynamic Response Due to Impacts,'' Journal of Vibration and Acoustics, 114(3):297-304.
27.
Novak, V. and Šittner, P.2004. ``Micromechanics Modelling of NiTi Polycristalline Aggregates Transforming Under Tension and Compression Stress,''Materials Science and Engineering A, 378(1-2):490-498.
28.
Otsuka, K. and Wayman, C.M.1997. Shape Memory Materials, Cambridge University Press.
29.
Panoskaltsis, V.P., Bahuguna, S. and Soldatos, D.2004. ``On the Thermomechanical Modeling of Shape Memory Alloys ,'' International Journal of Non-linear Mechanics, 39(5):709-722.
30.
Patoor, E., Lagoudas, D.C., Entchev, P.B., Brinson, L.C. and Gao, X.2006. `` Shape Memory Alloys, Part 1: General Properties and Modeling of Single Crystals,'' Mechanics of Materials, 38(5-6):391-429.
31.
Piao, M., Otsuka, K., Miyazaki, S. and Horikawa, H.1993. ``Mechanism of the AS Temperature Increase by Pre-deformation in Thermoelastic Alloys,'' Materials Transactions JIM, 34(10):919-929.
32.
Proft, J.L. and Duerig, T.W.1990. ``The Mechanical Aspects of Constrained Recovery,'' In: Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann.
33.
Stalmans, R., Delaey, L. and Van Humbeeck, J.1997. ``Generation of Recovery Stresses: Thermodynamic Modelling and Experimental Verification,''Journal de Physique IV, 7(C5):47-52.
34.
Stalmans, R., Van Humbeeck, J. and Delaey, L.1995. ``Thermodynamic Modelling of Shape Memory Behaviour: Some Examples,''Journal de Physique IV, 5(C8):203-208.
35.
Šittner, P., Vokoun, D., Dayananda, G.N. and Stalmans, R.2000. ``Recovery Stress Generation in Shape Memory Ti50Ni45Cu5 Thin Wires,''Materials Science and Engineering A, 286(2): 298-311.
36.
Tanaka, K.1986. ``A Thermomechanical Sketch of Shape Memory Effect: One-dimensional Tensile Behavior,'' Research Mechanics, 18(3):251-263.
37.
Thamburaja, P. and Anand, L.2001. ``Polycrystalline Shape-Memory Materials: Effect of Crystallographic Texture,'' Journal of the Mechanics and Physics of Solids , 49(4):709-737.
38.
Tokuda, M., Ye, M., Takakura, M. and Sittner, P.1998. ``Calculation of Mechanical Behaviors of Shape Memory Alloy Under Multiaxial Loading Conditions,'' International Journal of Mechanical Sciences, 40(2-3):227-235.
39.
Tsoi, K.A., Stalmans, R. and Schrooten, J.2002. ``Transformational Behaviour of Constrained Shape Memory Alloys,'' Acta Materialia, 50(14):3535-3544.
40.
Videnic, T.2004. ``Constrained Recovery in Shape Memory Alloys,'' PhD Thesis, University of Ljubljana (in Slovene).
41.
Zhu, J.J. and Liew, K.M.2004. ``Describing the Morphology of 2H Martensite Using Group Theory Part I: Theory,'' Mechanics of Advanced Materials and Structures, 11(3):197-225.
