The purpose of this work is to use magnetorheological elastomers (MREs) as field-dependent springs within three vibration absorber configurations, and to determine their vibration absorption characteristics. Magnetorheological elastomers are fabricated from silicone gel and iron microparticles, and implemented as tunable springs in three vibration absorber configurations, which excited the MREs in shear, squeeze mode, and compression. Each vibration absorber configuration exploits different magneto-mechanical properties, achieving very different results. The MRE iron concentration is varied to find the largest natural frequency shift for the squeeze-mode absorber due to an applied magnetic field. Absorbers with MREs containing 35% iron by volume exhibits the largest natural frequency shift, 507%. MREs containing 35% iron are placed into shear and longitudinal mode vibration absorber devices, which exhibit 470% and 180% frequency increases, respectively.
Lord MR Solutions (2001). `` Magnetic Circuit Design,'' Engineering Notes.
2.
Abe, M. and Igusa, T.1996. ``Semi-active Dynamic Vibration Absorbers for Controlling Transient Response,'' Journal of Sound and Vibration, 198(5):547-569.
3.
Bellan, C. and Bossis, G.2002. ``Field Dependence of Viscoelastic Properties of MR Elastomers ,'' International Journal of Modern Physics B, 16(17-18):2447-2453.
4.
Bossis, G., Abbo, C., Cutillas, S., Lalis, S. and Metayer, C.1999. ``Electroactive and Electrostructured Elastomers, '' International Journal of Modern Physics B, 15(6-7):564-573.
5.
Cunefare, K.A.2000. ``State-switched Absorber for Vibration Control of Point-excited Beams,'' Journal of Intelligent Material Systems and Structures , 13(2-3):97-105.
6.
Cunefare, K.A., DeRosa, S., Sadegh, N. and Larson, G.2000. ``Stateswitched Absorber for Semi-active Structural Control ,'' Journal of Intelligent Material Systems and Structures , 11(4):300-310.
7.
Davis, L.C.1999. ``Model of Magnetorheological Elastomers, '' Journal of Applied Physics, 85(6):3348-3351.
8.
Drozdov, A.D. and Dorfmann, A.2001. ``The Stress-strain Response and Ultimate Strength of Filled Elastomers,'' Computational Materials Science, 21(3):395-417.
9.
Ginder, J.M., Clark, S.M., Schlotter, W.F. and Nichols, M.E.2002. ``Magnetostrictive Phenomena in Magnetorheological Elastomers ,'' International Journal of Modern Physics B, 16(17-18): 2412-2418.
10.
Ginder, J.M., Schlotter, W.F., Elie, L.D. and Clark, S.M.2001a. ``Magnetorheological Elastomers in Tunable Vibration Absorbers,'' SPIE Smart Structures 2001, Newport Beach, CA.
11.
Ginder, J.M., Nichols, M.E., Elie, L.D. and Tardiff, J.D.1999. ``Magnetorheological Elastomers: Properties and Applications ,'' SPIE Conference on Smart Materials Technologies , Newport Beach, CA.
12.
Ginder, J.M., Schlotter, W.F. and Nichols, M.E.2001b. ``Controllablestiffness Components Based on Magnetorheological Elastomers,'' Smart Structures and Materials 2000 - Smart Structures and Integrated Systems, Newport Beach, CA.
13.
Guth, E.1945. ``Theory of Filler Reinforcement,'' Journal of Applied Physics, 16(20):20-25.
14.
Holdhusen, M. and Cunefare, K.A.2003. ``Damping Effects on the State-switched Absorber Used for Vibration Suppression,'' Journal of Intelligent Material Systems and Structures, 14(9):551-561.
15.
Hrovat, D., Baral, P. and Rabins, M.1983. ``Semi-active Versus Passive or Active Tuned Mass Dampers for Structural Control,'' ASCE Journal of Engineering Mechanics , 109(3): 691-705.
16.
Jolly, M.R., Carlson, J.D., Munoz, B.C. and Bullions, T.A.1996. ``The Magnetoviscoelastic Response of Elastomer Composites Consisting of Ferrous Particles Embedded in a Polymer Matrix,'' Journal of Intelligent Material Systems and Structures, 7(November):613-622.
17.
Karnopp, D., Crosby, M.J. and Harwood, R.A.1974. ``Vibration Control Using Semi-active Force Generators ,'' Journal of Engineering for Industry, 96(Series B, no. 2):619-626.
18.
Karnopp, D.C.1973. ``Active and Passive Isolation of Random Vibration, In: Snowdon, J.C. (ed.), Isolation of Mechanical Vibration, Impact, and Noise, Vol. 1, pp. 64-86, ASME. New York, NY.
19.
Meinecke, E.A. and Taftaf, M.I.1988. ``Effect of Carbon Black on the Mechanical Properties of Elastomers,'' Rubber Chemistry and Technology, 61(3):534-547.
20.
Meirovitch, L.1986. Elements of Vibration Analysis, McGraw Hill, New York.
21.
Payne, A.R. and Whittaker, R.E.1971. ``Low Strain Dynamic Properties of Filled Rubber, '' Rubber Chemistry Technology, 44: 440-478.
22.
Rigbi, Z. and Jilken, L.1983. ``The Response of an Elastomer Filled with Soft Ferrite to Mechanical and Magnetic Influences.'' Journal of Magnetism and Magnetic Materials, 37:267-276.
23.
Shiga, T., Okada, A. and Kurauchi, T.1995. ``Magnetroviscoelastic Behavior of Composite Gels, '' Journal of Applied Polymer Science, 58(4):787-792.
24.
Sun, J.Q., Jolly, M. and Norris, M.1995. ``Passive, Adaptive, and Active Tuned Vibration Absorbers - A Survey,'' Journal of Vibration and Acoustics, 177(3B):234-242.
25.
Zhou, G.Y. and Jiang, Z.Y.2004. ``Deformation in Magnetorheological Elastomer and Elastomer-Ferromagnet Composite Driven by a Magnetic Field,'' Smart Materials and Structures, 13(2):309-316.
