An overview of the wide possibilities of applications of the author's mesomechanical concept to shape memory (SM) phenomena is presented, and a new application worked out for modeling the two-way SM is framed in this concept. Explanation of the common background of the different methods of training the two-way SM is presented. It is demonstrated, how and why, specific kinds of deformation lead to improvement or impairment of the two-way SM.
Airoldi, G., Corsi, A. and Riva, G.1998. ``Step-wise Martensite to Austenite Reversible Transformation Stimulated by Temperature or Stress: A Comparison in NiTi Alloys,'' Materials Science and Engineering, A241(1—2):233—240.
2.
Auricchio, F. and Stefanelli, U.2005. ``Well-posedness and Approximation for a One-dimensional Model for Shape Memory Alloys,'' Mathematical Models & Methods in Applied Sciences, 15(9):1301—1327.
3.
Boyd, J.G. and Lagoudas, D.C.1996a. ``A Thermodynamical Constitutive Model for Shape Memory Materials. Part I. The Monolithic Shape Memory Alloy'' International Journal of Plasticity, 12(6):805—842.
4.
Boyd, J.G. and Lagoudas, D.C.1996b. ``A Thermodynamical Constitutive Model for Shape Memory Materials. Part II. The SMA Composite Material,'' International Journal of Plasticity, 12(7):843—873.
5.
Christian, J.W.1982. ``Deformation by Moving Interfaces,'' Metallurgical Transactions A, 13A(4):509—538.
6.
Cingolani, E., Ahlers, M. and Sade, M.1995. ``The Two Way Shape Memory Effect in Cu-Zn-Al Single Crystals: Role of Dislocations and Stabilization,'' Acta Metall. Mater. , 43(6):2451—2461.
7.
Contardo, L.1988. ``Studies of Approaches to Training, Stability and the Origin of Two-way Shape Memory Effect in a Cu-Zn-Al Alloy,'' (in French), These no 88ISAL0048, INSALyon.
8.
De Araujo, C.J.1999. ``The Cyclic Behavior of the Fibers of Shape Memory Alloys Ti-Ni-Cu: an Electro-thermomechanical Analysis, Degradation and Fatigue Caused by Thermal Cycling under Constraint'' (in French), These no 99 ISAL 0021, INSALyon.
9.
Falk, F.1993. ``On Constitutive Theories of Shape Memory Alloys Undergoing a Structural Phase Transformation,'' In: Proc. VIII. Conf. Continuum Models of Discrete Systems, Paderborn1992, Materials Science Forum, 123—125:91—100.
10.
Fuentes, J.M.G., Gümpel, P. and Strittmatter, J.2002. ``Phase Change behavior of Nitinol Shape Memory Alloys,'' Advanced Engineering Materials , 4(7):437—451.
11.
Gall, K. and Sehitoglu, H.1999. ``The Role of Texture in Tension-compression Asymmetry in Polycrystalline NiTi,'' International Journal of Plasticity , 15(1):69—92.
12.
Goldstein, D., Kabacoff, L. and Tydings, J.1987. ``Stress Effects on Nitinol Phase Transformations,'' J. of Metals, 39(3):19—26.
13.
Graesser, E.J. and Cozzarelli, F.A.1994. ``A Proposed 3-dimensional Constitutive Model for Shape-memory Alloys,'' Journal of Intelligent Material Systems and Structures, 5(1):78—89.
14.
Guilemany, J.M. and Fernandez, J.1995. ``Mechanism of Two-way Shape Memory Effect Obtained by Stabilised Stress Induced Martensite,'' Journal de Physique IV, Colloque C2, supplement to Journal de Physique III, 5(February):355—359.
15.
Kafka, V.1994a. ``Shape Memory: A New Concept of Explanation and of Mathematical Modelling. Part I: Micromechanical Explanation of the Causality in the SM Processes,'' Journal of Intelligent Material Systems and Structures , 5(6):809—814.
16.
Kafka, V.1994b. ``Shape Memory: A New Concept of Explanation and of Mathematical Modelling. Part II: Mathematical Modelling of the SM Effect and Pseudoelasticity ,'' Journal of Intelligent Material Systems and Structures , 5(6):815—824.
Kafka, V.2001. Mesomechanical Constitutive Modeling, World Scientific, Singapore, New Jersey, London, Hong Kong.
19.
Kafka, V. and Vokoun, D.1998. ``Two-way Shape Memory: Its Nature and Modeling,'' Acta Technica CSAV, 43(4):375—391.
20.
Kafka, V. and Vokoun, D.2000a. ``Shape Memory Elements in Bending: Influence of the Shape of their Cross-section,'' Journal of Intelligent Material Systems and Structures, 11(12):977—984.
21.
Kafka, V. and Vokoun, D.2000b. ``Heterogeneity on the Atomic Scale and Shape Memory Phenomena,'' In: Potier-Ferry, M. and Toth, L.S. (eds), 4th Proc. Euromech Solid Mechanics Conference, Vol. 2. p. 570, Metz, France, June 26—30, Université de Metz , Metz2000.
22.
Kafka, V. and Vokoun, D.2005. ``On Backstresses, Overstresses, and Internal Stresses Represented on the Mesoscale,'' International Journal of Plasticity , 21(8):1461—1480.
23.
Kafka, V. and Vokoun, D.2006. ``Background of Two Characteristic Features of Shape Memory Phenomena,'' Journal of Intelligent Material Systems and Structures , 17(6):511—520.
24.
Kainuma, R., Matsumoto, M. and Honma, T.1986. ``The Mechanism of the All-round Shape Memory Effect in a Ni-rich TiNi Alloy,'' In: Proceedings of the International Conference on Martensitic Transformations, pp. 717—722, The Japan Institute of Metals, Sendai.
25.
Kawai, M., Ogawa, H., Baburaj, V. and Koga, T.1999. ``Multiaxial Constitutive Modeling for R-phase and M-phase Transformations of TiNi Shape Memory Alloys,'' Arch. Mech. , 51(6):665—692.
26.
Kudoh, Y., Tokonami, M., Miyazaki, S. and Otsuka, K.1985. ``Crystal Structure of the Martensite in Ti-49.2at.%Ni Alloy Analyzed by the Single Crystal X-Ray Diffraction Method,'' Acta Metall., 33(11):2049—2056.
27.
Lagoudas, D.C. and Bo, Z.1999. ``Thermomechanical Modeling of Polycrystalline SMAs under Cyclic Loading, Part II: Material Characterization and Experimental Results for a Stable Transformation Cycle,'' Int. J Eng. Sci., 37(9):1141—1173.
28.
Lagoudas, D.C., Entchev, P.B., Popov, P., Patoor, E., Brinson, L.C. and Gao, X.2006. ``Shape Memory Alloys, Part II: Modeling of Polycrystals ,'' Mechanics of Materials, 38(5—6):430—462.
29.
Lahoz, R. and Puertolas, J.A.2004. ``Training and Two-way Shape Memory in NiTi Alloys: Influence on Thermal Parameters,'' Journal of Alloys and Compounds, 381(1—2):130—136.
30.
Leclercq, S. and Lexcellent, C.1996. ``A General Macroscopic Description of the Thermomechanical Behavior of Shape Memory Alloys,'' J. Mech. Phys. Solids, 44(6):953—980.
31.
Lexcellent, C. and Bourbon, G.1996. ``Thermodynamical Model of Cyclic Behaviour of Ti-Ni and Cu-Zn-Al Shape Memory Alloys under Isothermal Undulated Tensile Tests,'' Mech. of Mat., 24(1):59—73.
32.
Lexcellent, C., Leclercq, S., Gabry, B. and Bourbon, G.2000. ``The Two Way Shape Memory Effect of Shape Memory Alloys: An Experimental Study and a Phenomenological Model,'' Intern. J Plasticity, 16(10—11):1155—1168.
33.
Liang, C. and Rogers C.A., 1992. ``A Multi-dimensional Constitutive Equations of Shape Memory Alloys,'' Journal of EngineeringMathematics, 26(2):429—443.
34.
Liu, Y. and McCormic, P.G.1990. ``Factors Influencing the Development of Two-way Shape Memory Effect,'' Acta Metall. Mater., 38(7):1321—1326.
35.
Meng, X.L., Cai, W. and Zhao, L.C.2005. ``Effect of Deformation on the Phase Transformation and Two-way Shape Memory Effect in a Ti-Ni-Hf High Temperature Shape Memory Alloy ,'' Rare Metal Materials and Engineering, 34(3):355—358.
36.
Miller, D.A. and Lagoudas, D.C.2000. ``Thermo-mechanical Characterization of NiTiCu and NiTi SMA Actuators: Influence of Plastic Strains,'' Smart Materials and Structures, 9(5):640—652.
37.
Miyazaki, S., Otsuka, K. and Suzuki, Y.1981. ``Transformation Pseudoelasticity and Deformation Behaviour in a Ti-50.6at%Ni Alloy,'' Scripta Metall., 15(3):287—292.
38.
Miyazaki, S. and Otsuka, K.1986. ``Deformation and Transformation Behaviour Associated with the R-phase in Ti-Ni Alloys,'' Metall. Transactions, 17A(1):53—63.
39.
Müller, Ch. and Bruhns, O.T.2006. ``A Thermodynamic Finite-strain Model for Pseudoelastic Shape Memory Alloys,'' International Journal of Plasticity , 22(9):1658—1682.
40.
Paiva, A., Savi, M.A., Braga, A.M.B. and Pacheco, P.M.C.L.2005. ``A Constitutive Model for Shape Memory Alloys Considering Tensile—Compressive Asymmetry and Plasticity ,'' International Journal of Solids and Structures, 42(11—12):3439—3457.
41.
Patoor, E., Barke, P., Eberhardt, A. and Berveiller, M.1991. ``Internal Stress Effect in the Shape Memory Behaviour ,'' Journal de PhysiqueIV (Colloque C4, supplement to J. de Physique III, Vol. 1): 95—100.
42.
Patoor, E., Lagoudas, D.C., Entchev, P.B., Brinson, L.C. and Gao, X.2006. ``Shape Memory Alloys, Part I: General Properties and Modeling of Single Crystals,'' Mechanics of Materials, 38(5—6):391—429.
Ren, X., Miura, N., Zhang, J., Otsuka, K., Tanaka, K., Koiwa, M., Suzuki, T., Chumlyakov, Yu. I. and Asai, M.2001. ``A Comparative Study of Elastic Constants of Ti-Ni-based Alloys Prior to Martensitic Transformation,'' Materials Science and Engineering A, 312(1—2):196—206.
45.
Solovyev, L.A. and Khatchin, V.N.1974. ``The Effect of Internal Stresses on the Process of Phase Transformation in Alloys Titanium-nickel and Copper-zinc-silicon,'' (in Russian), Fizika Metallov i Metallovedenie, 37(5):1095—1097.
46.
Stoeckel, D., Hornbogen, E., Ritter, F. and Tautzenberger, P.1988. ``Alloys with Shape Memory ,'' (In German), Expert-Verlag, Kontakt & Studium, Bd.259, Ehningen bei Böblingen.
47.
Stoeckel, D. and Waram, T.1991. ``Thermo-variable Rate Springs; A New Concept for Thermal Sensor-actuators,'' Springs 30, special leaflet No. 2.
48.
Sun, Q.P. and Hwang, K.C.1993. ``Micromechanics Modeling for the Constitutive Behavior of Polycrystalline Shape Memory Alloys-II. Study of the Individual Phenomena ,'' J. Mech. Phys. Solids, 41(1):1—17.
49.
Tadaki, T., Otsuka, K. and Shimizu, K.1988. ``Shape Memory Alloys,'' Annual Reviews Mat. Science, 18(August):25—45.
50.
Tanaka, K., Hayashi, T. and Itoh, Y.1992. ``Analysis of Thermomechanical Behaviour of Shape Memory Alloys,'' Mech. of Mat., 13(3):207—215.
51.
Vokoun, D. and Kafka, V.1996. ``On Mathematical Modelling of the Incomplete Transformations in Pseudoelastic Processes in Binary Alloys,'' In: Gobin, P.F. and Tatibouët, J. (eds), Proc. 3rd International Conference on Intelligent Materials, Vol. 2779, pp. 541—545, Lyon, France, June 3—5, SPIE.
52.
Vokoun, D. and Kafka, V.1998. ``Training of Two-way Shape Memory Effect in NiTi Wire: One Experimental Procedure,'' Acta Technica CSAV, 43(5):507—513.
53.
Vokoun, D., Kafka, V. and Hu, C.T.2003. ``Recovery Stresses Generated by NiTi Shape Memory Wires under Different Constraint Conditions,'' Smart Mater. Struct.12(5):680—685.
54.
Wayman, C.M.1988. ``Fundamentals of the Shape Memory Effect, '' In: Abstracts of the Conference `Engineering with Shape Memory', pp. 15—17, Michigan State University.
55.
Zhang, X.M., Fernandez, J., Guilemany, J.M., Li, B., Liu, M. and Sha, X.W.2001. ``Role of Oriented Stress Fields in Two-way Shape-memory Alloys,'' Mater. Sci. Forum, 394(3): 221—224.
56.
Zhang, X.D., Rogers, C.A. and Liang, C.1997. ``Modelling of the Two-way Shape Memory Effect,'' J. Intel. Mat. Syst. and Structures, 8(4):353—362.
