The purpose of this study is to investigate the optimal topology of a piezoelectric actuator in reducing the tip deflection of a static cantilever beam under a concentrated tip load. Optimized topologies are obtained for both statically loaded and harmonically excited cases. The beam is modeled using the commercial finite element code ABAQUS, and a proportional control law is implemented through modification of the stiffness matrices. Parameter studies varying the gain and volume of the piezoelectric material are conducted. Optimal topologies show substantial improvement over equivalent uniform piezoelectric layers. This study also demonstrates the possibility of using a commercial FE code for studying structural control with piezoelectric materials.
Allaire, G.2002. Shape Optimization by the Homogenization Method, p. 456 , Springer, New York.
2.
Baz, A. and Ro, J.1995. Performance-characteristics of Active Constrained Layer Damping, Shock and Vibration, 2(1):33-42.
3.
Bendsøe, M.P.1995. Optimization of Structural Topology, Shape, and Material , p. 271, Springer-Verlag, Berlin, Heidelberg.
4.
Bendsøe, M.P. and Kikuchi, N.1988. Generating Optimal Topologies in Structural Design Using a Homogenization Method, Computer Methods in Applied Mechanics and Engineering, 71(2):197-224.
5.
Bendsøe, M.P. and Sigmund, O.2003. Topology Optimization, p. 370, Springer Verlag, Berlin.
6.
Buehler, M., Bettig, B. and Parker, G.2004. Topology Optimization of Smart Structures using a Homogenization Approach, Journal of Intelligent Material Systems and Structures , 15(8):655-667.
7.
Frecker, M.2002. A Review of Current Research Activities in Optimization of Smart Structures and Actuators In: Proceedings of the SPIE 9th Annual Symposium on Smart Structures and Materials, Vol. 4693, pp. 112-123, San Diego, CA.
8.
Guyan, R.J.1965. Reduction of Stiffness and Mass Matrices, AIAA Journal, 3(2):380.
9.
Ha, S.K., Keilers, C. and Chang, F.K.1992. Finite-Element Analysis of Composite Structures Containing Distributed Piezoceramic Sensors and Actuators, AIAA Journal , 30(3):772-780.
10.
Han, J.H., Cho, K.D., Youn, S.H. and Lee, I.1999. Vibration and Actuation Characteristics of Composite Structures with a Bonded Piezo-Ceramic Actuator, Smart Materials and Structures, 8(1):136-143.
11.
Hassani, B.A. and Hinton, S.G.1999. Homogenization and Structural Topology Optimization: Theory, Practice, and Software, p. 268, Springer Verlag, New York.
12.
Hossack, J.A. and Hayward, G.1991. Finite-Element Analysis of 1-3 Composite Transducers, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 38(6):618-629.
13.
Kim, J., Varadan, V.V., Varadan, V.K. and Bao, X.Q.1996. Finite-Element Modeling of a Smart Cantilever Plate and Comparison with Experiments, Smart Materials and Structures , 5(2):165-170.
14.
Kim, J., Vardan, V.V. and Vardan, V.K.1997. Finite Element Modeling of Structures Including Piezoelectric Active Devices, International Journal for Numerical Methods in Engineering, 40:817-832.
15.
Lerch, R.1990. Simulation of Piezoelectric Devices by 2-Dimensional and 3-Dimensional Finite-Elements, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 37(3):233-247.
16.
Loveday, P.W.2002. Comparison of Amplified Piezoelectric Actuators Based on Topological Optimization, In: Proceedings, SPIE Smart Structures and Materials, San Diego, CA.
17.
Lumsdaine, A.2002. Topology Optimization of Constrained Damping Layer TreatmentsASME International Mechanical Engineering Congress & Exposition, New Orleans, LA.
18.
Naillon, M., Coursant, R.H. and Besnier, F.1983. Analysis of Piezoelectric Structures by a Finite-Element Method, Acta Electronica, 25(4):341-362.
19.
Pai, R., Lumsdaine, A. and Parsons, M.2004. Design and Fabrication of Optimal Constrained Layer Damping Topologies, In: Proceedings of the SPIE 11th Annual Symposium on Smart Structures and Materials, Vol. 5386, pp. 438-449, San Diego, CA.
20.
Sigmund, O. and Torquato, S.1997. Design of Materials with Extreme Thermal Expansion Using a Three-phase Topology Optimization Method, Journal of the Mechanics and Physics of Solids, 45(6):1037-1067.
21.
Silva, E.C.N. and Kikuchi, N.1999. Design of Piezocomposite Materials and Piezoelectric Transducers Using Topology Optimization - Part III, Archives of Computational Methods in Engineering, 6(4):305-329.
22.
Silva, E.C.N., Fonseca, J.S.O. and Kikuchi, N.1997. Optimal Design of Piezoelectric Microstructures, Computational Mechanics, 19(5):397-410.
23.
Silva, E.C.N., Fonseca, J.S.O. and Kikuchi, N.1998. Optimal Design of Periodic Piezocomposites, Computer Methods in Applied Mechanics and Engineering, 159(1-2):49-77.
24.
Silva, E.C.N., Fonseca, J.S.O., de Espinosa, F.M., Crumm, A.T., Brady, G.A., Halloran, J.W. and Kikuchi, N.1999a. Design of Piezocomposite Materials and Piezoelectric Transducers Using Topology Optimization - Part I, Archives of Computational Methods in Engineering, 6(2):117-182.
25.
Silva, E.C.N., Nishiwaki, S. and Kikuchi, N.1999b. Design of Piezocomposite Materials and Piezoelectric Transducers Using Topology Optimization - Part II, Archives of Computational Methods in Engineering, 6(3):191-222.
26.
Silva, E.C.N., Nishiwaki, S. and Kikuchi, N.2000. Topology Optimization Design of Flextensional Actuators , IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 47(3):657-671.
27.
Tzou, H.-S.1993. Piezoelectric Shells, p. 468, Kluwer Academic, Boston.
28.
Tzou, H.S. and Tseng, C.I.1990. Distributed Piezoelectric Sensor/ Actuator Design for Dynamic Measurement/Control of Distributed Parameter-systems - A Piezoelectric Finite-Element Approach, Journal of Sound and Vibration, 138(1):17-34.
29.
Tzou, H.S. and Tseng, C.I.1991. Distributed Modal Identification and Vibration Control of Continua - Piezoelectric Finite-Element Formulation and Analysis, Journal of Dynamic Systems Measurement and Control-Transactions of the ASME , 113(3): 500-505.
30.
Varadan, V.V., Lim, Y.H. and Varadan, V.K.1996. Closed Loop Finite-Element Modeling of Active/Passive Damping in Structural Vibration Control, Smart Materials and Structures, 5(5):685-694.
31.
Veley, D.E. and Rao, S.S.1996. A Comparison of Active, Passive and Hybrid Damping in Structural Design, Smart Materials and Structures, 5(5):660-671.
32.
Yi, Y.M., Park, S.H. and Youn, S.K.2000. Design of Microstructures of Viscoelastic Composites for Optimal Damping Characteristics, International Journal of Solids and Structures, 37(35):4791-4810.
