Vibration control of a two-dimensional smart structure is presented. The least squares identification technique and a novel pole identification method are used to obtain accurate plant models. Comparable accuracy is achieved with a significantly lower model order using the latter method. A multivariable multi—input multi—output (MIMO) generalized minimum variance control scheme is used to address robustness issues of plant mismodeling, unmodeled modes/dynamics and control signal saturation. The controllers are tested for robustness to spillover problems. Results are further supported with the use of sensitivity response functions.
Bai, M.R. and Lin, G.M.1996. ``The Development of a DSP-Based Active Small Amplitude Vibration Control System for Flexible Beams by using the LQG Algorithms and Intelligent Materials,'' Journal of Sound and Vibration, 198(4):411—427.
2.
Balas, M.J.1978. ``Active Control of Flexible Systems,'' Journal of Optimization Theory and Applications, 25(3):415—436.
3.
Brown, M.D., Flynn, D. and Irwin, G.W.2002. ``Multiple Model Non-Linear Control of Synchronous Generators,'' Transactions ofthe Institute of Measurement and Control , 24(3):215—230.
4.
Butler, R., Rao, V.S. and Sana, S.1997. ``Design of Robust Controllers for Smart Structural Systems with Actuator Saturation,'' Journal of Intelligent Material Systems and Structures, 8(9):775—783.
5.
Chan, C.W. and Hui, K.1995. ``Design of Compensators for Actuator Saturation,'' In: Proceedings of the IMechE Part I — Journal of Systems and Control Engineering, 209(3):157—164.
6.
Chantalakhana, C. and Stanway, R.2000. ``Active Constrained Layer Damping of Clamed—Clamped Plate Vibrations,'' Journal of Sound and Vibration, 241(5):755—777.
7.
Chen, C.Q. and Shen, Y.P.1997. ``Optimal Control of Active Structures with Piezoelectric Modal Sensors and Actuators,'' Smart Materials and Structures , 6(4):403—409.
8.
Clegg, A.C.2000. ``Self-Tuning Position and Force Control of a Hydraulic Manipulator,'' PhD Thesis, Heriot-Watt University, UK.
9.
Crassidis, J.L., Leo, D.J., Inman, D.J. and Mook, D.J.1994. ``Robust Identification and Vibration Suppression of a Flexible Structure,'' Journal of Guidance, Control and Dynamics , 17(5):921—928.
10.
Damle, R. and Rao, V.1998. ``Neural Network Based Optimizing Controllers for Smart Structural Systems,'' Smart Materials and Structures, 7(1):23—30.
11.
Goh, S.P.2001. ``Investigation and Implementation of Advanced Control Techniques for Flexible Manipulators,'' PhD Thesis, The University of Leeds, UK.
12.
Han, J.H. and Lee, I.1999. ``Optimal Placement of Piezoelectric Sensors and Actuators for Vibration Control of a Composite Plate using Genetic Algorithms,'' Smart Materials and Structures, 8(2):257—267.
13.
Han, J.H., Rew, K.H. and Lee, I.1997. ``An Experimental Study of Active Vibration Control of Composite Structures with a PiezoCeramic Actuator and a Piezo-Film Sensor ,'' Smart Materials and Structures, 6(5):549—558.
14.
Khot, N.S., Veley, D.E. and Bolonkin, A.A.1996. ``Design of Smart Structures with Bounded Controls,'' In: Proceedings of the SPIE Conference. on Mathematics and Control in Smart Structures and Materials, Vol. 2715, pp. 173—182.
15.
Koike, A., Kapania, R.K. and Johnson, E.R.1994. ``Torsional and Flexural Control of Sandwich Composite Beams with Induced Strain Actuators,'' In: 5th International Conference on Adaptive Structures, Sendai , Japan, pp. 458—467.
Landau, I.D., Langer, J., Rey, D. and Barnier J.1996. ``Robust Control of a 360° Flexible Arm using the Combined Pole Placement/Sensitivity Function Shaping Method,'' IEEE Transactions on Control Systems Technology, 4(4):369—383.
18.
Liu, K. and Sun, X.2001. ``System Identification and Model Reduction for a Single Link Flexible Manipulator,'' Journal of Sound and Vibration , 242(5):867—891.
19.
Martins, N. and Quintão, P.E.M.2003. ``Computing Dominant Poles of Power System Multivariable Transfer Functions,'' IEEE Transactions on PowerSystems, 18(1):152—159.
20.
Pahalawaththa, N.C., Hope, G.S. and Malik, O.P.1991. ``MIMO Self-tuning Power Systems Stabilizer,'' International Journal of Control, 54(4):815—829.
21.
Plummer, A.R.1997. ``A Comparison of Linear Discrete-time Design Methods for Servosystem Control,'' In: Proceedings of the IMechE Part I — Journal of Systems and Control Engineering, Vol. 211, No. 4, pp. 281—300.
22.
Scott, R.G.2002. ``Robust Control of a Smart Vibrating Structure,'' PhD Thesis, The University of Leeds, UK.
23.
Scott, R.G., Brown, M.D. and Levesley, M.C.2003. ``Robust Multivariable Control of a Double Beam Cantilever Smart Structure,'' Smart Materials and Structures, 12(5):731—743.
24.
Smyser, C.P. and Chandrashekhara, K.1997. ``Robust Vibration Control of Composite Beams using Piezoelectric Devices and Neural Networks,'' Smart Materials and Structures, 6(2):178—189.
25.
Tani, J., Cheng, G.G., Cui, H. and Qiu, J.1997. ``Bending-twisting Vibration Control of a Plate using Piezoelectric Film,'' Proceedings of US-Japan Workshop on Smart Materials and Structures, The Minerals, Metals & Materials Society, pp.161—168.
26.
Tzou, H.S. and Hollkamp, J.J.1994. ``Collocated Independent Modal Control with Self-sensing Orthogonal Piezoelectric Actuators (Theory and Experiment),'' Smart Materials and Structures, 3(3):277—284.
27.
Walgama, K.S. and Sternby, J.1993. ``Conditioning Technique for Multiinput Multioutput Processes with Input Saturation,'' In: IEE Proceedings-D Control Theory and Applications, Vol. 140, No. 4, pp. 231—241.
28.
Wellstead, P.E. and Zarrop, M.B.1991. Self-tuning Systems: Control and Signal Processing, Wiley.
29.
Wolovich, W.A.1974. Linear Multivariable Systems, Springer-Verlag .
