Sage Journals: Discover world-class research

Abstract

Shape memory alloys (SMAs) are a class of smart material having the unique ability to return to a predefined shape when heated. These materials are employed in a variety of emerging applications, and may potentially be used to avoid traditionally voluminous and heavy prosthetic actuators. The primary focus of this article is to convey the design and evaluation of a compact, lightweight, and high-strain SMA ribbon-based artificial muscle for use in such biomimetic applications. A key factor in the design of such an actuator is a thorough understanding of the thermomechanical response of the shape memory material. As such, a review of the relevant constitutive models is included. A selected hysteresis model is evaluated for potential application to ribbon type elements. The proposed actuator achieves strains of 31.6%; a marked improvement over previously documented SMA-based actuators.

Keywords

shape memory alloy constitutive model artificial muscle NiTi thermomechanical

Get full access to this article

View all access options for this article.

References

Bar-Cohen, Y. , Xue, T. , Shahinpoor, M. , Simpson, J. and Smith, J. 1998. “Flexible, Low-mass Robotic Arm Actuated by Electroactive Polymers and Operated Equivalently to Human Arm and Hand,” Presented at Robotics 98: The 3rd Conf. and Exposition/ Demonstration on Robotics for Challenging Environments, Albuquerque, New Mexico, April 26–30, pp. 15–21 .

Barrett, R. and Gross, R.S. 1996. “Super-active Shape-memory Alloy Composites,” Smart Mater. Struct., 5(3): 255–260 .

Bernardini, D. and Pence, T.J. 2002. “Shape Memory Materials, Modeling,” In: Mel Schwartz , (ed.), Encyclopedia of Smart Materials, Vol. 2, pp. 964–980, J. Wiley, New York .

Bundhoo, V. and Park, E.J. 2005. “Design of a Biomimetic Finger for Prosthetic Hands,” Accepted to SPIE Int. Symp. on Smart Structures and Materials, San Diego, CA, March 6–10.

Chou, C.P. and Hannaford, B. 1996. “Measurement and Modeling of McKibben Pneumatic Artificial Muscles,” IEEE Trans. Rob. Autom., 12(1): 90–102 .

DeLaurentis, K. and Mavroidis, C. 2002. “Mechanical Design of a Shape Memory Alloy Actuated Prosthetic Hand,” Technol. Health Care, 10(2): 91–106 .

Dormandy, J. , Heeck, L. and Vig, S. 2004. “Major Amputations: Clinical Patterns and Predictors,” Semin . Vasc. Surg., 12(2): 154–161 .

El Feninat, F. , Laroche, G. , Fiset, M. and Mantovani, D. 2002. “Shape Memory Materials for Biomedical Applications,” Adv. Eng. Mater., 4(3): 91–104 .

Gorbet, R.B. and Russell, R.A. 1995. “A Novel Differential Shape Memory Alloy Actuator for Position Control,” Robotica, 13(4): 423–430 .

10.

Icardi, U. 2001. “Large Bending Actuator made with SMA Contractile Wires: Theory, Numerical Simulation and Experiments,” Composites Part B, 32(3): 259–267 .

11.

Lu, Z.K. and Weng, G.J. 2000. “A Micromechanical Theory for the Thermally Induced Phase Transformation in Shape Memory Alloys,” Smart Mater. Struct., 9(5): 582–591 .

12.

Makaran, J.B. , Dittmer, D.K. , Buchal, R.O. and MacArthur, D.B. 1993. “The Smart Wrist-hand Orthosis (WHO) for Quadriplegic Patients,” JPO, 5(3): 73–76 .

13.

Matsuzaki, Y. , Naito, H. , Ikeda, T. and Funami, K. 2001. “Thermomechanical behavior Associated with Pseudoelastic Transformation of Shape Memory Alloys,” Smart Mater. Struct., 10(5): 884–892 .

14.

Otsuka, K. and Ren, X. 2005. “Physical Metallurgy of Ti-Ni-based Shape Memory Alloys,” Prog. Mater. Sci., 50(5): 511–678 .

15.

Peng, X. , Yang, Y. and Huang, S. 2000. “A Two-phase Mixture Model for SMAs and Application to the Analysis for Pseudoelasticity of a SMA Polycrystal,” Smart Mater. Struct., 9(5): 604–612 .

16.

Pezzin, L. , Dillingham, T.R. , MacKenzie, E.J. , Ephraim, P. and Rossbach, P. 2004. “Use and Satisfaction with Prosthetic Limb Devices and Related Services,” Arch. Phys. Med. Rehabil., 85(5): 723–729 .

17.

Pfeiffer, C. , DeLaurentis, K. and Mavroidis, C. 1999. “Shape Memory Alloy Actuated Robot Prostheses: Initial Experiments,” In: Proceedings of the 1999 IEEE International Conference on Robotics and Automation, Vol. 3, pp. 2385–2391 .

18.

Safak, K.K. and Adams, G.G. 2002

“Modeling and Simulation of an Artificial Muscle and its Application to Biomimetic Robot Posture Control,”

Robot. Auton. Syst., 41(4): 225–243 .

19.

Sittner, P. , Stalmans, R. and Tokuda, M. 2000. “An Algorithm for Prediction of the Hysteretic Responses of Shape Memory Alloys,” Smart Mater. Struct., 9(4): 452–465 .

20.

Van Humbeeck, J. 2001. “Shape Memory Alloys: A Material and a Technology,” Adv. Eng Mater., 3(11): 837–850 .

21.

Van Humbeeck, J. , Leuven, K.U. and Stalmans, R. 2002. “Shape Memory Alloys, Types and Functionalities,” In: Mel Schwartz , (ed.), Encyclopedia of Smart Materials, Vol. 2, pp. 951–964, J. Wiley, New York .

A Study on the Thermomechanical Properties of Shape Memory Alloys-based Actuators used in Artificial Muscles

Abstract

Keywords

Get full access to this article

References