Piezoelectric transducers are known to exhibit less hysterisis when driven with current or charge rather than voltage. Despite this advantage, such methods have found little practical application due to the poor low-frequency response of present current and charge driver designs. This paper introduces the compliance feedback current driver containing a secondary voltage feedback loop to prevent DC charging of capacitive loads and to compensate for any voltage or current offsets within the circuit. Low-frequency bandwidths in the milli-Hertz range can be achieved. One application for such a device is the synthesis of piezoelectric shunt damping circuits. A number of block diagram transformations are presented to simplify the realization of analog or digital admittance transfer functions from aschematic circuit diagram.
Get full access to this article
View all access options for this article.
References
1.
Adriaens, H.J.M.T.A., de Koning, W.L. and Banning, R. December 2000. ‘‘Modeling Piezoelectric Actuators,’’ IEEE/ASME Transactions on Mechatronics, 5(4): 331–341 .
2.
Behrens, S. and Moheimani, S.O.R. 2002. ‘‘Current Flowing Multiple Mode Piezoelectric Shunt Dampener,’’ In: Proc. SPIE Smart Materials and Structures, March. San Diego, CA, Paper No. 4697-24, pp. 217–226 .
3.
Behrens, S., Moheimani, S.O.R. and Fleming, A.J. December 2002. ‘‘Multiple Mode Passive Piezoelectric Shunt Dampener,’’ In Proc. IFAC Mechatronics 2002, Berkerley, CA.
4.
Behrens, S., Fleming, A.J. and Moheimani, S.O.R. January 2003. ‘‘A Broadband Controller for Piezoelectric Shunt Damping of Structural Vibration,’’ IOP Smart Materials and Structures, 12: 18–28 .
5.
Chandrasekaran, S., Lindner, D.K. and Smith, R.C. November 2000. ‘‘Optimized Design of Switching Amplifiers for Piezoelectric Actuators,’’ Journal of Intelligent Material Systems and Structures, 11: 887–901 .
6.
Comstock, R. 1981. ‘‘Charge Control of Piezoelectric Actuators to Reduce Hysteresis Effects,’’ Japan Journal of Applied Physics, Part 2 – Letters.
7.
Corr, L.R. and Clark, W.W. 2002. ‘‘Comparison of Low-frequency Piezoelectric Switching Shunt Techniques for Structural Damping,’’ IOP Smart Materials and Structures, 11: 370–376 .
8.
Croft, D., Shedd, G. and Devasia, S. 2000. ‘‘Creep, Hysteresis and Vibration Compensation for Piezoactuators: Atomic Force Microscopy Application,’’ In: Proc. American Control Conference, June, Chicago, Illinois, pp. 2123–2128 .
9.
Cruz-Hernandez, J.M. and Hayward, V. January 2001. ‘‘Phase Control Approach to Hysteresis Reduction,’’ IEEE Transactions on Control Systems Technology, 9(1): 17–26 .
10.
Dosch, J.J., Inman, D.J. and Garcia, E. January 1992. ‘‘A Self-sensing Piezoelectric Actuator for Collocated Control,’’ Journal of Intelligent Material Systems and Structures, 3: 166–185 .
11.
Fleming, A. J. and Moheimani, S.O.R. 2002. ‘‘Adaptive Piezoelectric Shunt Damping,’’ In: Proc. SPIE Smart Structures and Materials 2003 – Modeling, Signal Processing, and Control, March, San Diego, CA USA, Paper No. 4693, pp. 556–567 .
12.
Fleming, A.J.Behrens, S. and Moheimani, S.O.R. August 2000a. ‘‘Synthetic Impedance for Implementation of Piezoelectric Shunt-damping Circuits,’’ IEE Electronics Letters, 36(18): 1525–1526 .
13.
Fleming, A.J., Behrens, S. and Moheimani, S.O.R. December 2000b. ‘‘Innovations in Piezoelectric Shunt Damping,’’ In: Proc. SPIE: Symposium on Smart Materials and MEM’s, Smart Structures and Devices, SPIE Vol. 4326, Melbourne, Australia.
14.
Fleming, A.J., Behrens, S. and Moheimani, S.O.R. March 2002. ‘‘Optimization and Implementation of Multi-mode Piezoelectric Shunt Damping Systems,’’ IEEE/ASME Transactions on Mechatronics, 7(1): 87–94 .
15.
Furutani, K., Urushibata, M. and Mohri, N. May 1998. ‘‘Improvement of Control Method for Piezoelectric Actuator by Combining Charge Feedback with Inverse Transfer Function Compensation,’’ In: Proc. IEEE International Conference on Robotics and Automation, Leuven, Belgium, pp. 1504–1509 .
16.
Ge, P. and Jouaneh, M. May 1996. ’’Tracking Control of a Piezoelectric Actuator,’’ IEEE Transactions on Control Systems Technology, 4(3): 209–216 .
17.
Hagood, N.W. and Von Flotow, A. 1991. ‘‘Damping of Structural Vibrations with Piezoelectric Materials and Passive Electrical Networks,’’ Journal of Sound and Vibration, 146(2): 243–268 .
18.
Hagood, N.W., Chung, W.H. and von Flotow, A. 1990. ‘‘Modelling of Piezoelectric Actuator Dynamics for Active Structural Control,’’ Journal of Intelligent Material Systems and Structures, 1: 327–354 .
19.
Hollkamp, J.J. 1994. ‘‘Multimodal Passive Vibration Suppression with Piezoelectric Materials and Resonant Shunts,’’ Journal of Intelligent Materials Systems and Structures, 5: 49–56 .
20.
Horowitz, P. and Hill, W. 1980. The Art of Electronics, Cambridge University Press, Cambridge .
21.
IEEE Standard on Piezoelectricity. ANSI/IEEE standard 176–1987, 1987.
22.
Jaffe, B., Cook, W.R. and Jaffe, H. 1971. Piezoelectric Ceramics, Academic Press, St. Louis, MO, USA .
23.
Kailath, T. Linear Systems, Prentice-Hall, Upper Saddle River, NJ 07458.
24.
Kaizuka, H. and Siu, B. May 1988. ‘‘Simple Way to Reduce Hysteresis and Creep when Using Piezoelectric Actuators,’’ Japan Journal of Applied Physics, Part 2 – Letters, 27(5): 773–776 .
25.
Main, J.A., Garcia, E. and Newton, D.V. September–October 1995. ‘‘Precision Position Control of Piezoelectric Actuators Using Charge Feedback,’’ Journal of Guidance, Control, and Dynamics, 18(5): 1068–1073 .
26.
Mayergoyz, I.D. 1991. Mathematical Models of Hysteresis, Springer Verlag, New York .
27.
Mohan, N., Undeland, T.M. and Robbins, W.P. 1995. Power Electronics: Converters, Applications, and Design, Wiley, New York .
28.
Moheimani, S.O.R., Fleming, A.J. and Behrens, S. December 2001. ‘‘A Highly Resonant Controller for Multi-mode Piezoelectric Shunt Damping,’’ IEE Electronics Letters,37(25): 1505–1506 .
29.
Moheimani, S.O.R., Fleming, A.J. and Behrens, S. July 2002. ‘‘On the Feedback Structure of Wideband Piezoelectric Shunt Damping Systems,’’ In: Proc. IFAC World Congress, arcelona, Spain.
30.
Newcomb, C.V. and Flinn, I. May 1982. ‘‘Improving the Linearity of Piezoelectric Ceramic Actuators,’’ IEE Electronics Letters, 18(11): 442–443 .
31.
Niezrecki, C. and Cudney, H.H. September 2001. ‘‘Feasibility to Control Launch Vehicle Internal Scoustics Using Piezoelectric Actuators,’’ Journal of Intelligent Material Systems and Structures, 12: 647–660 .
32.
Stansfield, D. 1991. Underwater Electroacoustic Transducers, Bath University Press and Institute of Acoustics, Bath, UK .
33.
Van Valkenburg, M.E. 1982. Analog Filter Design, CBS College Publishing, New York, NY, USA .
34.
Wu, S.Y. March 1999. ‘‘Multiple PZT Transducers Implemented with Multiple-mode Piezoelectric Shunting for Passive Vibration Damping,’’ In: Proc. SPIE Smart Structures and Materials, Passive Damping and Isolation, SPIE Vol. 3672. Huntington Beach, CA, pp. 112–122 .
35.
Wu, S.Y. and Bicos, A.S. March 1997. ‘‘Structural Vibration Damping Experiments Using Improved Piezoelectric Shunts,’’ In: Proc. SPIE Smart Structures and Materials, Passive Damping and Isolation, SPIE Vol. 3045, pp. 40–50 .
