The Rheological Characteristics of Electrorheological Fluids in Dynamic Squeeze

Abstract

This paper is concerned with an experimental and theoretical determination of the rheological performance of an electrorheological (ER) fluid when subjected to time-dependent applied loads. The experimental facility was built as a squeeze cell in which the fluid is sandwiched between two electrodes, one fixed and the other moving, which permits the instantaneous measurement of the mechanical and electrical responses of the fluid. The transient rheological characteristics of the fluid were assessed for various mechanical force levels and for constant voltage excitation of the fluid. Input and output stress levels across the fluid were monitored enabling the dynamic response of the fluid to be determined using a combination of displacement, force, velocity and acceleration transducers. The experimental results were compared with the results from a modified theoretical analysis, which employs a bi-viscous shear stress/shear strain characteristic of the electrically stressed fluid together with a fluid yield stress, which has a strain-direction dependence on the electric field.

Keywords

electrorheological fluids bi-viscous characteristics vibration damping

Get full access to this article

View all access options for this article.

References

Bonnecaze, R.T. and J.F. Brady . 1992. “Yield Stresses in Electrorheological Fluids,” J. Rheology, 36:73-115.

Bose, H. , Hoppe, R.H.W. and Mazurkevitch, G. 2001. “Computer Simulations of Electrorheological Fluid Flows,” J. Non-Newtonian Fluid Mechanics, to be published (Personal Communication).

Bullough, W.A. and Foxon, M.B. 1978. “A Proportionate Coulomb and Viscously Damped Isolation System,” J. Sound and Vibration, 56:35-44.

Coulter, J.P. , Weiss, K.D. and Carlson, J.D. 1993. “Engineering Applications of Electro-rheological Fluids,” J. Intelligent Material Systems and Structures, 4:248-259.

Ehrgott, R. and Masri, S. 1993. “Experimental Studies of Electrorheological Materials for Applications in Adaptive Structures,” Proceedings of SPIE-The International Society for Optical Engineering, 2040:161-175.

El Wahed, A.K. , Sproston, J.L. and Stanway, R. 1998. “The Performance of an Electrorheological Fluid in Dynamic Squeeze Flow Under Constant Voltage and Constant Field,” J. Physics D: Applied Physics, 31:2964-2974.

El Wahed, A.K. , Sproston, J.L. and Stanway, R. 1999. “The Performance of Electrorheological Fluid in Dynamic Squeeze Flow: The Influence of Solid Phase Size,” J. Colloid and Interface Science, 211:264-280.

El Wahed, A.K. , Sproston, J.L. and Williams, E.W. 2000. “The Effect of a Time-dependent Electric Field on the Dynamic Performance of an Electrorheological Fluid in Squeeze,” J. Physics D: Applied Physics, 33:2995-3003.

Jung, S.Y. and Choi, S.B. 1995. “Analysis of a Short Squeeze-Film Damper Operating with Electrorheological Fluids,” Tribology Transactions, 38(4):857-862.

10.

Khusid, B. , Acrivos, A. , Khodorkovsky, Y. and Beltran, M. 1999. “Electrorheological Squeeze-flow Shock Absorber,” International Journal of Modern Physics B, 13(15&16):2143-2150.

11.

Monkman, G.J. 1995. “The Electrorheological Effect Under Compressive Stress,” J. Physics D: Applied Physics, 28:588-593.

12.

Morishita, S. and An, Y.K. 1996. “On Dynamic Characteristics of ER Fluid Squeeze Film Damper,” JSME International Journal, Series C, 39(4):702-707.

13.

Nakano, M. and Yonekawa, T. 1997. “Active Damper Using Electrorheological Suspension and Its Application to Vibration Control,” Noise and Vibration Worldwide, 28(8):21-29.

14.

Peel, D.J. , Stanway, R. , Sproston, J.L. and Bullough, W.A. 1995. “An ER Long-Stroke Damper: Performance Modelling Under Quasi-Static Conditions,” ASME Design Engineering Publishing Division, DE: Vibration Control, Analysis and Identification, 84-3(C):737-744.

15.

Petek, N.K. , Goudie, R.J. and Boyle F.P. 1988. “Actively Controlled Damping in Electrorheological Fluid-filled Engine Mounts,” SAE Technical Paper No. 881785.

16.

Sproston, J.L. , Stanway, R. , Williams, E.W. and Rigby, S.G. 1994. “The Electrorheological Automotive Engine Mount,” J. Electrostatics, 32:253-259.

17.

Sproston, J.L. , El Wahed, A.K. , Williams, E.W. and Stanway, R. 1996. “A Comparison of the Performance of ER Fluid in Squeeze,” International Journal of Modern Physics B, 10(23&24):3081-3091.

18.

Stanway, R. , Sproston, J.L. , Prendergast, M.J. , Case, J.R. and Wilne, C.E. 1992. “ER Fluids in the Squeeze-flow Mode: An Application to Vibration Isolation,” J. Electrostatics, 28:89-94.

19.

Stanway, R. , Sproston, J.L. and El Wahed, A.K. 1996. “Applications of Electrorheological Fluids in Vibration Control: A Survey,” J. Smart Materials and Structures, 5(4):464-482.

20.

Wereley, N.M. and Lindler, J. 1999. “Biviscous Damping Behaviour in Electrorheological Dampers,” ASME, Aerospace Division Publication AD, “Adaptive Structures and Material Systems”, Nashville, USA, 59:67-75.

21.

Williams, E.W. , Rigby, S.G. , Sproston, J.L. and Stanway, R. 1993. “Electrorheological Fluids Applied to an Automotive Engine Mount,” J. Non-Newtonian Fluid Mechanics, 47:221-238.

22.

Yang, F. 1997. “Tension and Compression of Electrorheological Fluid,” J. Colloid Interface Science, 192:162-165.

23.

Yao, G.Z. , Qiu, Y. , Meng, G. , Fang, T. and Fan, Y.B. 1999. “Vibration Control of a Rotor System by Disk Type Electrorheological Damper,” J. of Sound and Vibration, 219:175-188.