Performance Evaluation of ER Shock Damper Subjected to Impulse Excitation

Abstract

This paper presents shock responses of a cylindrical shock damper featuring an electrorheological (ER) fluid. An appropriate size of the ER shock damper is designed and manufactured on the basis of the field-dependent Bingham model of the ER fluid. The damping force of the ER shock damper is evaluated with respect to the excitation frequency at various electric fields. Subsequently, the ER shock damper is incorporated with a 1 degree-of-freedom (DOF) dynamic system in order to investigate shock responses. A skyhook controller is formulated to attenuate acceleration level due to impulse excitation and empirically realized. Controlled acceleration magnitudes are evaluated and compared with uncontrolled ones at various excitation frequencies.

Get full access to this article

View all access options for this article.

References

1. Choi, S.B. , Choi, Y.T. , Chang, E.G. , Han, S.J. and Kim, C.S. 1998. “Control Characteristics of a Continuously Variable ER Damper,” Mechatronics, 8:143-161.

2. Choi, S.B. and Kim, W.K. 2000. “Vibration Control of a Semi-Active Suspension Featuring Electrorheological Fluid Dampers,” Journal of Sound and Vibration, 234:537-546.

3. Linder, J.E. and Wereley, N.M. 1999. “Double Adjustable Shock Absorbers Using Electrorheological Fluid,” Journal of Intelligent Material Systems and Structures, 10:652-657.

4. Dyke, S.J. , Spencer, B.F. Jr. , Sain, M.K. and Carlson, J.D. 1996. “Seismic Response Reduction Using Magnetorheological Damper.” In: Proceedings of IFAC World Congress 1, pp. 145-150.

5. Kamath, G.M. , Wereley, N.M. and Jolly, M.R. 1998. “Characterization of Semi-Active Magnetorheological Fluid Lag Mode Dampers.” In: Proceedings of the SPIE Conference on Smart Structures and Integrated Systems, pp. 3329-2237.

6. Lee, H.S. and Choi, S.B. 2000. “Control and Response Characteristics of a Magnetorheological Fluid Damper for a Passenger Vehicles,” Journal of Intelligent Material Systems and Structures, 11:80-87.

7. Rivin, E.I. 1984. “Passive Engine Mounts Some Directions for Further Development,” SAE Technical Paper Series, 940259.

8. Gillespie, T.D. 1992. Fundamentals of Vehicle Dynamics, Society of Automotive Eng., Inc., Warrendale, PA, USA.

9. El Wahed, A.K. , Sproston, J.L. and Schleyer, G.K. 1999. “A Comparison Between Electrorheological and Magnetorheological Fluids Subjected to Impulsive Loads,” Journal of Intelligent Material Systems and Structures, 10:695-700.

10.

10. Karnopp, D.C. , Crosby, M.J. and Harwood, R.A. 1974. “Vibration Control Using Semi-Active Force Generators,” Journal of Engineering for Industry ASME, 96: 619-626.