An Improved Shape Memory Alloy Actuator for Rotor Blade Tracking

Abstract

The design, analysis, and testing of an improved Shape Memory Alloy (SMA)-based tracking tab actuator is described in this paper. The goal of the actuator is to provide in-flight tracking capability for a helicopter rotor in order to minimize 1/rev vibrations due to rotor dissimilarities. Previous SMA-based actuator designs demonstrated the potential for in-flight rotor tracking but admitted drawbacks that led to inconsistent operation under air-loads. The current research builds upon the existing knowledge base and addresses the challenges encountered in previous designs. The objective is to achieve a deflection of 58 with an accuracy of 0:18 under realistic aerodynamic loading conditions. The present actuation concept is based on the bidirectional motion of a pair of antagonistic SMA wires, with a passive friction brake to lock the tab position. A theoretical model of the actuator was developed based on Brinson’s thermomechanical model. The model was used to predict the behavior of the actuator under external loading and applied as a design tool to identify optimal actuator parameters. The actuator was integrated into a NACA 0012 12 in. chord blade section and tested in an open-jet wind tunnel at speeds of up to 120 ft/s (0.107 M) and at angles of attack up to 158. Closed-loop tracking was implemented using a PID controller with gains selected by Ziegler-Nichols tuning. The improved SMA actuator meets the project goals by achieving repeatable tab deflection of up to 58with an average accuracy of 0.058. Position hold under power-off conditions and a duty cycle of 20 cycles/h were also demonstrated.

Get full access to this article

View all access options for this article.

References

Abbott, I.H. and von Doenhoff, A.E. 1959 . Theory of Wing Sections , Dover Publications, Inc. , New York, N.Y. 10014 .

Brinson, L.C. 1993 . “One Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-constant Material Functions and Redefined Martensite Internal Variables,” J. Intelligent Material Systems and Structures , 4 : 229 - 242 .

Dynalloy 2002 . Website: http://www.dynalloy.com , Flexinol Technical Characteristics , Dynalloy Inc., 3194-A Airport Loop Drive , Costa Mesa, CA .

Epps, J.J. and Chopra, I. 2000. “Methodology for In-flight Tracking of Rotor Blades Using Shape Memory Alloy Actuators,” In: Proceedings of the 56th American Helicopter Society Forum .

Giurgiutiu, V. , Rogers, C.A. and Zuidervaart, J. 1997. “Incrementally Adjustable Rotor-blade Tracking Tab Using SMA Composites,” In: 38th AIAA/ASME/ASCE/AHS/ASC, Structures, Structural Dynamics and Materials Conference , Kissimmee, FL .

Kennedy, D.K. , Straub, F.K., McD.Schetky, L. , Chaudhry, Z. and Roznoy, R. 2000. “Development of a SMA Actuator for In-flight Rotor Blade Tracking,” In: Wereley, N.M. (ed.), Smart Structures and Materials 2000: Smart Structures and Integrated Systems , Vol. 3895 of Proceedings SPIE .

Liang, C. , Davidson, F. , Schetky, L.M. and Straub, F.K. 1996. “Applications of Torsional Shape Memory Alloys Actuators for Active Rotor Blade Control - Opportunities and Limitations,” In: Smart Structures and Materials 1996: Smart Structures and Integrated Systems , Proceedings SPIE .

Ogata, Katsuhiko 1997 . Modern Control Engineering , 3rd edn , Prentice-Hall , Englewood Cliffs, New Jersey 07632 .

Prahlad, H. and Chopra, I. 2001. Comparative Evaluation of Shape Memory Alloy Constitutive Models with Experimental Data,” In: Smart Structures and Materials 2001: Smart Structures and Integrated Systems , Proceedings SPIE .

10.

Rediniotis, O.K. , Lagoudas, D.C. , Garner, L.J. and Wilson, L.N. 1999. “Development of a Spined Underwater Biomimetic Vehicle with SMA Actuators,” In: Wereley, N.M. (ed.), Smart Structures and Materials 1999: Smart Structures and Integrated Systems , Vol. 3668 of Proceedings SPIE .

11.

Singh, Kiran 2002. “Design of an Improved Shape Memory Alloy Actuator for Helicopter Blade Tracking,” Master’s Thesis, University of Maryland, Department of Aerospace Engineering, College Park, MD.

12.

Walz, C. and Chopra, I. 1994. Design and Testing of a Helicopter Rotor Model with Smart Trailing Edge Aps,” In: 35th AIAA/ASME/ASCE/AHS/ASC, Structures, Structural Dynamics and Materials Conference , Hilton Head, SC .